使用vitis 2020.2的Program Flash的时候,Console会显示下面的异常。串口调试口也会打印FSBL的DATA ABORT之类的异常。主要原因就是如果设置启动模式不是JTAG的情况下,FSBL会异常。所以需要修改FSBL的代码固定位JTAG启动。
主要解决方法:
Problem 1: Default FSBL stops working with error stage,because it didn’t find bootable image on flash.
Solution: used special FSBL where boot mode is set fix to JTAG, see Xilinx AR#70548
Case 2: flash contains bootable design
Problem 1: Vivado starts design from QSPI Flash before selected FSBL will be programmed. This seems to prevent Vivado from starting the selected FSBL correctly, which leads to inconsistencies and terminates the programming
Solution 1: use the same FSBL which was used on the design which was programmed
Solution 2: change boot mode some other a mode which does not boot any design and use special FSBL。
Possible Problem 2: running
vitis 2020.2 Program Flash 问题
最新推荐文章于 2024-04-09 11:17:11 发布