正点原子IMX6ULL开发板设备树文件：imx6ull-alientek-emmc.dts

最新推荐文章于 2024-07-25 20:41:32 发布
最新推荐文章于 2024-07-25 20:41:32 发布
阅读量2.6k 收藏 5
点赞数
分类专栏： I.MX6ULL
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/zxy131072/article/details/105204387
版权 
/*
 * Copyright (C) 2016 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include "imx6ull.dtsi"

/ {
	model = "Freescale i.MX6 ULL 14x14 EVK Board";
	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";

	chosen {
		stdout-path = &uart1;
	};

	memory {
		reg = <0x80000000 0x20000000>;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		linux,cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x14000000>;
			linux,cma-default;
		};
	};

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
		status = "okay";
	};

	pxp_v4l2 {
		compatible = "fsl,imx6ul-pxp-v4l2", "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2";
		status = "okay";
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_can_3v3: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "can-3v3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
		};

		reg_sd1_vmmc: regulator@1 {
			compatible = "regulator-fixed";
			regulator-name = "VSD_3V3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_gpio_dvfs: regulator-gpio {
			compatible = "regulator-gpio";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_dvfs>;
			regulator-min-microvolt = <1300000>;
			regulator-max-microvolt = <1400000>;
			regulator-name = "gpio_dvfs";
			regulator-type = "voltage";
			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
			states = <1300000 0x1 1400000 0x0>;
		};
	};

	sound {
		compatible = "fsl,imx6ul-evk-wm8960",
			   "fsl,imx-audio-wm8960";
		model = "wm8960-audio";
		cpu-dai = <&sai2>;
		audio-codec = <&codec>;
		asrc-controller = <&asrc>;
		codec-master;
		gpr = <&gpr 4 0x100000 0x100000>;
		/*
                 * hp-det = <hp-det-pin hp-det-polarity>;
		 * hp-det-pin: JD1 JD2  or JD3
		 * hp-det-polarity = 0: hp detect high for headphone
		 * hp-det-polarity = 1: hp detect high for speaker
		 */
		hp-det = <3 0>;
		hp-det-gpios = <&gpio5 4 0>;
		mic-det-gpios = <&gpio5 4 0>;
		audio-routing =
			"Headphone Jack", "HP_L",
			"Headphone Jack", "HP_R",
			"Ext Spk", "SPK_LP",
			"Ext Spk", "SPK_LN",
			"Ext Spk", "SPK_RP",
			"Ext Spk", "SPK_RN",
			"LINPUT2", "Mic Jack",
			"LINPUT3", "Mic Jack",
			"RINPUT1", "Main MIC",
			"RINPUT2", "Main MIC",
			"Mic Jack", "MICB",
			"Main MIC", "MICB",
			"CPU-Playback", "ASRC-Playback",
			"Playback", "CPU-Playback",
			"ASRC-Capture", "CPU-Capture",
			"CPU-Capture", "Capture";
	};

	spi4 {
		compatible = "spi-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_spi4>;
		/* pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; */
		status = "okay";
		gpio-sck = <&gpio5 11 0>;
		gpio-mosi = <&gpio5 10 0>;
		/* cs-gpios = <&gpio5 7 0>; */
		num-chipselects = <1>;
		#address-cells = <1>;
		#size-cells = <0>;

		gpio_spi: gpio_spi@0 {
			compatible = "fairchild,74hc595";
			gpio-controller;
			#gpio-cells = <2>;
			reg = <0>;
			registers-number = <1>;
			registers-default = /bits/ 8 <0x57>;
			spi-max-frequency = <100000>;
		};
	};
};

&cpu0 {
	arm-supply = <&reg_arm>;
	soc-supply = <&reg_soc>;
	dc-supply = <&reg_gpio_dvfs>;
};

&clks {
	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
	assigned-clock-rates = <786432000>;
};

&csi {
	status = "okay";

	port {
		csi1_ep: endpoint {
			remote-endpoint = <&ov5640_ep>;
		};
	};
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	phy-mode = "rmii";
	phy-handle = <&ethphy0>;
	phy-reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
	phy-reset-duration = <26>;
	status = "okay";
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet2>;
	phy-mode = "rmii";
	phy-handle = <&ethphy1>;
	phy-reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
	phy-reset-duration = <26>;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
		};

		ethphy1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;
		};
	};
};

&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	xceiver-supply = <&reg_can_3v3>;
	status = "okay";
};

&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	xceiver-supply = <&reg_can_3v3>;
	status = "okay";
};

&gpc {
	fsl,cpu_pupscr_sw2iso = <0x1>;
	fsl,cpu_pupscr_sw = <0x0>;
	fsl,cpu_pdnscr_iso2sw = <0x1>;
	fsl,cpu_pdnscr_iso = <0x1>;
	fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	mag3110@0e {
		compatible = "fsl,mag3110";
		reg = <0x0e>;
		position = <2>;
	};

	fxls8471@1e {
		compatible = "fsl,fxls8471";
		reg = <0x1e>;
		position = <0>;
		interrupt-parent = <&gpio5>;
		interrupts = <0 8>;
	};
};

&i2c2 {
	clock_frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	codec: wm8960@1a {
		compatible = "wlf,wm8960";
		reg = <0x1a>;
		clocks = <&clks IMX6UL_CLK_SAI2>;
		clock-names = "mclk";
		wlf,shared-lrclk;
	};

	ov5640: ov5640@3c {
		compatible = "ovti,ov5640";
		reg = <0x3c>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_csi1>;
		clocks = <&clks IMX6UL_CLK_CSI>;
		clock-names = "csi_mclk";
		pwn-gpios = <&gpio_spi 6 1>;
		rst-gpios = <&gpio_spi 5 0>;
		csi_id = <0>;
		mclk = <24000000>;
		mclk_source = <0>;
		status = "okay";
		port {
			ov5640_ep: endpoint {
				remote-endpoint = <&csi1_ep>;
			};
		};
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_1>;
	imx6ul-evk {
		pinctrl_hog_1: hoggrp-1 {
			fsl,pins = <
				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
			>;
		};

		pinctrl_csi1: csi1grp {
			fsl,pins = <
				MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
				MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
				MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
				MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
				MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
				MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
				MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
				MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
				MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
				MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
				MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
				MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
			>;
		};

		pinctrl_enet1: enet1grp {
			fsl,pins = <
				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x10B0
			>;
		};

		pinctrl_enet2: enet2grp {
			fsl,pins = <
				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
				MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x10b0 /* ENET2 RESET */
			>;
		};

		pinctrl_flexcan1: flexcan1grp{
			fsl,pins = <
				MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
				MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
			>;
		};

		pinctrl_flexcan2: flexcan2grp{
			fsl,pins = <
				MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
				MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
			>;
		};

		pinctrl_lcdif_dat: lcdifdatgrp {
			fsl,pins = <
				MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
				MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
				MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
				MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
				MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
				MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
				MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
				MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
				MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
				MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
				MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
				MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
				MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
				MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
				MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
				MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
				MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
				MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
				MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
				MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
				MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
				MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
				MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
				MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
			>;
		};

		pinctrl_lcdif_ctrl: lcdifctrlgrp {
			fsl,pins = <
				MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
				MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
				MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
				MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
			>;
		};

		pinctrl_pwm1: pwm1grp {
			fsl,pins = <
				MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
			>;
		};

		pinctrl_qspi: qspigrp {
			fsl,pins = <
				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
			>;
		};

		pinctrl_sai2: sai2grp {
			fsl,pins = <
				MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
				MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
				MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
				MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
				MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
			>;
		};

		pinctrl_tsc: tscgrp {
			fsl,pins = <
				MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
				MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
				MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
				MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
			>;
		};

		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
				MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
				MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
				MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
			>;
		};

		pinctrl_uart2dte: uart2dtegrp {
			fsl,pins = <
				MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
				MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
				MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS	0x1b0b1
				MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS	0x1b0b1
			>;
		};

		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10071
				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
			>;
		};

		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
			fsl,pins = <
				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
			>;
		};

		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
			fsl,pins = <
				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
			fsl,pins = <
				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
			>;
		};

		pinctrl_usdhc2_8bit: usdhc2grp_8bit {
			fsl,pins = <
				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
			>;
		};

		pinctrl_usdhc2_8bit_100mhz: usdhc2grp_8bit_100mhz {
			fsl,pins = <
				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100b9
				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170b9
				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9
				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9
				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9
				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9
			>;
		};

		pinctrl_usdhc2_8bit_200mhz: usdhc2grp_8bit_200mhz {
			fsl,pins = <
				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100f9
				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170f9
				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
			>;
		};

		pinctrl_wdog: wdoggrp {
			fsl,pins = <
				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
			>;
		};
	};
};

&iomuxc_snvs {
	pinctrl-names = "default_snvs";
        pinctrl-0 = <&pinctrl_hog_2>;
        imx6ul-evk {
		pinctrl_hog_2: hoggrp-2 {
                        fsl,pins = <
                                MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x80000000
                        >;
                };

		pinctrl_dvfs: dvfsgrp {
                        fsl,pins = <
                                MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x79
                        >;
                };
		
		pinctrl_lcdif_reset: lcdifresetgrp {
                        fsl,pins = <
                                /* used for lcd reset */
                                MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
                        >;
                };

		pinctrl_spi4: spi4grp {
                        fsl,pins = <
                                MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10        0x70a1
                                MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11        0x70a1
                                /* MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07      0x70a1 */
                                /* MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08      0x80000000 */
                        >;
                };

                pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
                        fsl,pins = <
                                MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04   0x17059
                        >;
                };
        };
};


&lcdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lcdif_dat
		     &pinctrl_lcdif_ctrl
		     &pinctrl_lcdif_reset>;
	display = <&display0>;
	status = "okay";

	display0: display {
		bits-per-pixel = <16>;
		bus-width = <24>;

		display-timings {
			native-mode = <&timing0>;
			timing0: timing0 {
			clock-frequency = <9200000>;
			hactive = <480>;
			vactive = <272>;
			hfront-porch = <8>;
			hback-porch = <4>;
			hsync-len = <41>;
			vback-porch = <2>;
			vfront-porch = <4>;
			vsync-len = <10>;

			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <1>;
			pixelclk-active = <0>;
			};
		};
	};
};

&pwm1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&pxp {
	status = "okay";
};

&qspi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_qspi>;
	status = "okay";
	ddrsmp=<0>;

	flash0: n25q256a@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,n25q256a";
		spi-max-frequency = <29000000>;
		spi-nor,ddr-quad-read-dummy = <6>;
		reg = <0>;
	};
};

&sai2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai2
		     &pinctrl_sai2_hp_det_b>;

	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
			  <&clks IMX6UL_CLK_SAI2>;
	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
	assigned-clock-rates = <0>, <12288000>;

	status = "okay";
};

&tsc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_tsc>;
	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
	measure-delay-time = <0xffff>;
	pre-charge-time = <0xfff>;
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	fsl,uart-has-rtscts;
	/* for DTE mode, add below change */
	/* fsl,dte-mode; */
	/* pinctrl-0 = <&pinctrl_uart2dte>; */
	status = "okay";
};

&usbotg1 {
	dr_mode = "otg";
	srp-disable;
	hnp-disable;
	adp-disable;
	status = "okay";
};

&usbotg2 {
	dr_mode = "host";
	disable-over-current;
	status = "okay";
};

&usbphy1 {
	tx-d-cal = <0x5>;
};

&usbphy2 {
	tx-d-cal = <0x5>;
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
	keep-power-in-suspend;
	enable-sdio-wakeup;
	vmmc-supply = <&reg_sd1_vmmc>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2_8bit>;
	pinctrl-1 = <&pinctrl_usdhc2_8bit_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc2_8bit_200mhz>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog>;
	fsl,wdog_b;
};
zxy131072
关注
  • 0
    点赞
  • 踩
  • 5
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
Linux内核笔记（驱动篇）之 【u-boot移植--基于正点原子iMX6ull开发板】
哆哆jarvis的博客
03-24 423
看到找不到网络设备和不支持屏幕，还要修改屏幕驱动和eth相关的东西。，这是NXP针对imx6ull这个板子的配置文件，复制改成自己的。下 添 加 开 发 板 对 应 的 头 文 件 ， 复 制。内容比较多，一共修改了3个文件，内容较多，输出diff。从原理图看到ENET1，对应eth0网口，复位脚接到了。记录我踩的一个坑，由于编译工具链版本太高，导致调用。原子这款开发板与NXP官方的原理图是一样的，除了。uboot的板级配置文件在顶层目录的*，就先执行一下，然后再执行。，加粗部分是自己修改的。
Linux下的IMX6ULL——开发板基本操作（二）
妄北y
10-24 2811
前面我们已经配置好了环境，下载好了软件，下面让我们对我们使用的开发板有给简单的了解吧，IMX6ULL Pro开发板基本操作是必不可少的一大环节，下面让我们从它的硬件资源，软件资源等一系列开发板的基础操作做一个大概的认识吧
【正点原子】I.MX6U嵌入式Linux驱动开发指南V1.0.pdf
10-26
【正点原子】I.MX6U嵌入式Linux驱动开发指南V1.0.pdf 官方下载完整版，2019.10.26发布完整版
正点原子imx6ull-mini开发板移植linux内核全过程
最新发布
NEWEVA__zzera22的博客
07-25 1169
linux内核的移植跟uboot很像，配置defconfig或者经过图形化界面配置。然后就是设备树的依赖dbs文件的各种修改，像时钟、emmc8线、网络驱动修改。最麻烦的就是网络驱动，设计很多个文件，其实就是那两个IO口的倒腾，然后就是硬软复位问题，LAN8720A必须要软复位，软复位就是操作其内部寄存器，硬复位就是芯片的一个专门用来复位的引脚，像单片机的RST脚。总共修改了对应IO的时钟、属性、驱动。
6.3信号量
weixin_42097108的博客
07-05 332
信号量 信号量是同步的一种方式。Linux 内核也提供了信号量机制，信号量常常用于控制对共享资源的访问。 举一个很常见的例子，某个停车场有 100 个停车位，这 100 个停车位大家都可以用，对于大家来说这100 个停车位就是共享资源。假设现在这个停车场正常运行，你要把车停到这个这个停车场肯定要先看一下现在停了多少车了？还有没有停车位？当前停车数量就是一个信号量，具体的停车数量就是这个信号量值，当这个值到 100 的时候说明停车场满了。停车场满的时你可以等一会看看有没有其他的车开出停车场，当有车开出停车场的
imx6设备树pinctrl解析
michaelcao1980的专栏
02-24 1万+
最近在移植linux，用到kernel版本为3.14.28，在高版本的内核源码中用到了设备树（device-tree），设备树中用到pinctrl的配置，记录一下。 1、普通设置 在配置串口时，pinctrl的配置信息如下所示： [cpp] view plain copy "font-size:14px;"
Linux驱动开发-设备树-正点原子
qq_920149531的博客
08-09 1480
设备树一、设备树概念二、DTS、DTB和DTC三、DTS语法3.1 .dtsi头文件3.2 设备节点3.2.1 字符串3.2.2 32 位无符号整数3.2.3 字符串列表3.3 标准属性3.3.1 compatible 属性3.3.2 model 属性3.3.3 status 属性3.3.4 #address-cells 和#size-cells 属性3.3.5 reg 属性3.3.6 ranges 属性3.3.7 name 属性3.3.8 device_type 属性3.4 根节点 compatible
imx6ull移植openwrt
u010798513的博客
09-18 1598
imx6ull移植openwrt
IMX6ULL开发板emmc.img镜像，带有MJPG-streamer，FFmpeg，Nginx
07-11
IMX6ULL开发板emmc.img镜像，带有MJPG-streamer，FFmpeg，Nginx。
韦东山 IMX6ULL和正点原子_万事开头难 - 介绍IMX6ULL启动方式
weixin_39716971的博客
11-20 1634
不同开发板，启动方式不一样，今天我们来介绍imx6ull开发板的启动方式，这非常重要。若不了解清楚启动方式，后面的所有开发工作便无从谈起。本文摘自100ask_imx6ull 开发板 配套学习手册-《嵌入式Linux应用开发完全手册_韦东山全系列视频文档全集V2.6》.pdf1.1 IMX6ULL 启动方式参考资料：开发板资料网盘 路径：06_Datasheet(数据手册)-> Core_b...
韦东山 IMX6ULL和正点原子_「正点原子Linux连载」第四十三章Linux设备树（一）
weixin_39993301的博客
11-12 1090
1)实验平台：正点原子Linux开发板2)摘自《正点原子I.MX6U嵌入式Linux驱动开发指南》关注官方微信号公众号，获取更多资料：正点原子前面章节中我们多次提到“设备树”这个概念，因为时机未到，所以当时并没有详细的讲解什么是“设备树”，本章我们就来详细的谈一谈设备树。掌握设备树是Linux驱动开发人员必备的技能！因为在新版本的Linux中，ARM相关的驱动全部采用了设备树(也有支持老式驱动的，...
基于nxp官方移植的core_ca7.h 适用于imx6ull
11-07
基于nxp官方移植的core_ca7.h 适用于imx6ull
IOT-OS之RT-Thread（十五）— SDIO设备对象管理 + AP6181(BCM43362) WiFi模块
01-06
本章介绍SDIO Wi-Fi模块的驱动实现过程，对SDIO不熟悉的可以先参阅博客：SD/MMC + SDIO，对RT-Thread驱动分层与主从分离思想不熟悉的，可以先参阅博客：驱动分层与主从分离思想。 一、AP6181 Wi-Fi模块简介 1.1 AP6181 硬件接口 Pandora开发板为我们提供了一个板载Wi-Fi 芯片 — AP6181，我们不需要再外接扩展模块（比如 ESP8266）即可实现连接 Wi-Fi 并访问外部网络的功能。我们先看下Pandora开发板原理图中 Wi-Fi 模块 AP6181 的硬件接线原理图： 正基公司的 AP6181 Wi-Fi 模组具有以下特点： 符
imx6ull移植OpenWRT系统
03-23 923
opkg 下载应用时会出现下载链接，手动复制在浏览器打开，找到类似的架构下的ipk文件下载，然后上传到路由器里，再进行 opkg install {packagename}.ipk 安装。3.在终端界面opkg安装应用程序的时候，会提示架构问题，这是因为《i.mx6ul开发板移植openwrt系统》这篇文章，已经修改了imx6ull的架构信息，造成不匹配。1.在imx6ull的Linux内核源码中，一定要设置这几个关键参数：交叉编译工具，架构，defconfig配置信息。
imx6ull移植openwrt系统
weixin_42105114的博客
03-20 1080
本文纯属个人娱乐，所用开发板为正点原子imx6ull emmc版开发板，屏幕为4.3寸 800*480 在移植openwrt之前应先按照教程将uboot和内核移植好。
【正点原子FPGA连载】第二十四章Linux设备树 摘自【正点原子】DFZU2EG_4EV MPSoC之嵌入式Linux开发指南
weixin_55796564的博客
01-30 919
1）实验平台：正点原子MPSoC开发板 2）平台购买地址：https://detail.tmall.com/item.htm?id=692450874670 3）全套实验源码+手册+视频下载地址： http://www.openedv.com/thread-340252-1-1.html前面章节中我们多次提到“设备树”这个概念，因为时机未到，所以当时并没有详细的讲解什么是“设备树”，本章我们就来详细的谈一谈设备树。掌握设备树是Linux驱动开发人员必备的技能！因为在新版本的Linux内核中，设备驱动基本全部
iTOP-iMX6开发板-设备树内核-配置和实现pwm蜂鸣器
weixin_30591551的博客
09-09 355
本文档主要讲解在 iMX6 开发板设备树内核如何配置 pwm，文档以蜂鸣器的 PWM 为例，将默认的 GPIO 配置设置为 PWM。1 设备树修改这里选择蜂鸣器的网络 CSI_PWN 来配置，对应的 IO 为 SD1_DAT2。打开“arch/arm/boot/dts/imx6qdl-sabresd.dtsi”设备树文件，默认的配置是 “MX6QDL_PAD_SD1_DAT2__GPI...
(野火)imx6ull移植openwrt
qq_51252118的博客
08-14 1812
如上图所示 系统在文件夹 /home/linux/19_openwrt/openwrt-19.07.2/package/kernel/linux 下 由于 modules/netfilter.mk的161行包含nf_flow_table_hw.ko ,但是在其对应文件夹下又找不到该文件 而导致了问题的产生。这里提供一个安装包（也可以在野火提供的百度云文件中搜索下使用） https://download.csdn.net/download/qq_51252118/88046394。
【imx6ul】从头搭建imx6ul开发环境（uboot、内核编译及烧入、mfgtools详细使用方法）
热门推荐
风雨无阻
07-26 3万+
欢迎扫码关注微信公众号：柒零玖嵌入式，更多嵌入式软硬件相关分享！硬件平台：自制imx6ul（详见http://blog.csdn.net/fengyuwuzu0519/article/details/79133851）系统：linux-4.1.15文件系统：busybox-1.22.1.tar.bz2编译器：gcc version 4.9.1 20140710 (prerelease) (cro...............
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值