【Redis】配置文件详解

Redis配置文件样例

# Redis默认不是以守护进程的方式运行，可以通过该配置项修改，使用yes启用守护进程(开机自启动)
# 启用守护进程后，Redis会把pid写到一个pidfile中，在/var/run/redis.pid
daemonize no

# 当Redis以守护进程方式运行时，Redis默认会把pid写入/var/run/redis.pid文件，可以通过pidfile指定
pidfile /var/run/redis.pid

# 指定Redis绑定的端口，默认端口为6379
# 如果指定0端口，表示Redis不监听TCP连接
port 6379

# 绑定的主机地址
# 你可以绑定单一接口，如果没有绑定，所有接口都会监听到来的连接
# bind 127.0.0.1

# 当客户端闲置多长时间后关闭连接，如果指定为0，表示关闭该功能
timeout 0

# 指定日志记录级别，Redis总共支持四个级别：debug、verbose、notice、warning，默认为verbose
# debug (很多信息, 对开发／测试比较有用)
loglevel verbose

# 日志记录方式，默认为标准输出，如果配置为redis为守护进程方式运行，而这里又配置为标准输出，则日志将会发送给/dev/null
logfile stdout

# 设置数据库的数量，默认数据库为0，可以使用select <dbid>命令在连接上指定数据库id
# dbid是从0到‘databases’-1的数目
databases 16

################################ SNAPSHOTTING  快照相关配置#################################
# 指定在多长时间内，有多少次更新操作，就将数据同步到数据文件，可以多个条件配合
#   格式
#   save <seconds> <changes>
#
#   默认的配置文件中满足以下条件将会同步数据:
#   900秒（15分钟）内有1个更改
#   300秒（5分钟）内有10个更改
#   60秒内有10000个更改

save 900 1
save 300 10
save 60 10000

# 指定存储至本地数据库时是否压缩数据，默认为yes，Redis采用LZF压缩，如果为了节省CPU时间，可以关闭该选项，但会导致数据库文件变的巨大
rdbcompression yes

# 指定本地数据库文件名，默认值为dump.rdb
dbfilename dump.rdb

# 工作目录.
# 指定本地数据库存放目录，文件名由上一个dbfilename配置项指定
# 
# 注意，这里只能指定一个目录，不能指定文件名
dir ./

################################# REPLICATION 复制相关配置 #################################

# 主从复制。使用slaveof从 Redis服务器复制一个Redis实例。注意，该配置仅限于当前slave有效
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
# 设置当本机为slav服务时，设置master服务的ip地址及端口，在Redis启动时，它会自动从master进行数据同步
# slaveof <masterip> <masterport>


# 当master服务设置了密码保护时，slav服务连接master的密码
# 下文的“requirepass”配置项可以指定密码
# masterauth <master-password>

# 当从库同主机失去连接或者复制正在进行，从机库有两种运行方式：
# 1) 如果slave-serve-stale-data设置为yes(默认设置)，从库会继续相应客户端的请求
#
# 2) 如果slave-serve-stale-data是指为no，出去INFO和SLAVOF命令之外的任何请求都会返回一个错误"SYNC with master in progress"
slave-serve-stale-data yes

# 从库会按照一个时间间隔向主库发送PINGs.可以通过repl-ping-slave-period设置这个时间间隔，默认是10秒
# repl-ping-slave-period 10

# repl-timeout 设置主库批量数据传输时间或者ping回复时间间隔，默认值是60秒
# repl-timeout 60

################################## 安全 ###################################

# 警告：因为redis速度相当快，所以在一台比较好的服务器下，一个外部的用户可以在一秒钟进行150K次的密码尝试，这意味着你需要指定非常非常强# 大的密码来防止暴力破解
# 设置Redis连接密码，如果配置了连接密码，客户端在连接Redis时需要通过auth <password>命令提供密码，默认关闭
# requirepass foobared

# 命令重命名.
# 在一个共享环境下可以重命名相对危险的命令。比如把CONFIG重名为一个不容易猜测的字符。
# 举例:
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52

# 如果想删除一个命令，直接把它重命名为一个空字符""即可，如下：
# rename-command CONFIG ""

################################### LIMITS 约束####################################

# 设置同一时间最大客户端连接数，默认无限制，Redis可以同时打开的客户端连接数为Redis进程可以打开的最大文件描述符数，
# 如果设置maxclients 0，表示不作限制。当客户端连接数到达限制时，Redis会关闭新的连接并向客户端返回max Number of clients reached错误信息
# maxclients 128

# 指定Redis最大内存限制，Redis在启动时会把数据加载到内存中，达到最大内存后，Redis会先尝试清除已到期或即将到期的Key，
# 当此方法处理后，仍然到达最大内存设置，将无法再进行写入操作，但仍然可以进行读取操作。
# Redis新的vm机制，会把Key存放内存，Value会存放在swap区
# maxmemory <bytes>


# 配置删除策略，选择达到最大内存后，对被挑选出来的数据进行删除的策略。
# The default is:
#
# maxmemory-policy volatile-lru

#配置每次选取待删除数据的个数
#
# maxmemory-samples 3

############################## APPEND ONLY MODE （AOF） ###############################

# 
# Note that you can have both the async dumps and the append only file if you
# like (you have to comment the "save" statements above to disable the dumps).
# Still if append only mode is enabled Redis will load the data from the
# log file at startup ignoring the dump.rdb file.
# 指定是否在每次更新操作后进行日志记录，Redis在默认情况下是异步的把数据写入磁盘，如果不开启，可能会在断电时导致一段时间内的数据丢失。
# 因为redis本身同步数据文件是按上面save条件来同步的，所以有的数据会在一段时间内只存在于内存中。默认为no
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
# log file in background when it gets too big.

appendonly no

# 指定更新日志文件名，默认为appendonly.aof
# appendfilename appendonly.aof

# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush 
# data on disk, some other OS will just try to do it ASAP.

# 指定更新日志条件，共有3个可选值：
# no:表示等操作系统进行数据缓存同步到磁盘（快）
# always:表示每次更新操作后手动调用fsync()将数据写到磁盘（慢，安全）
# everysec:表示每秒同步一次（折衷，默认值）

appendfsync everysec
# appendfsync no

# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# Redis may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving the durability of Redis is
# the same as "appendfsync none", that in pratical terms means that it is
# possible to lost up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
# 
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.
no-appendfsync-on-rewrite no

# Automatic rewrite of the append only file.
# Redis is able to automatically rewrite the log file implicitly calling
# BGREWRITEAOF when the AOF log size will growth by the specified percentage.
# 
# This is how it works: Redis remembers the size of the AOF file after the
# latest rewrite (or if no rewrite happened since the restart, the size of
# the AOF at startup is used).
#
# This base size is compared to the current size. If the current size is
# bigger than the specified percentage, the rewrite is triggered. Also
# you need to specify a minimal size for the AOF file to be rewritten, this
# is useful to avoid rewriting the AOF file even if the percentage increase
# is reached but it is still pretty small.
#
# Specify a precentage of zero in order to disable the automatic AOF
# rewrite feature.

auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb

################################## SLOW LOG ###################################

# The Redis Slow Log is a system to log queries that exceeded a specified
# execution time. The execution time does not include the I/O operations
# like talking with the client, sending the reply and so forth,
# but just the time needed to actually execute the command (this is the only
# stage of command execution where the thread is blocked and can not serve
# other requests in the meantime).
# 
# You can configure the slow log with two parameters: one tells Redis
# what is the execution time, in microseconds, to exceed in order for the
# command to get logged, and the other parameter is the length of the
# slow log. When a new command is logged the oldest one is removed from the
# queue of logged commands.

# The following time is expressed in microseconds, so 1000000 is equivalent
# to one second. Note that a negative number disables the slow log, while
# a value of zero forces the logging of every command.
slowlog-log-slower-than 10000

# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the slow log with SLOWLOG RESET.
slowlog-max-len 1024

################################ VIRTUAL MEMORY ###############################

### WARNING! Virtual Memory is deprecated in Redis 2.4
### The use of Virtual Memory is strongly discouraged.

### WARNING! Virtual Memory is deprecated in Redis 2.4
### The use of Virtual Memory is strongly discouraged.

# Virtual Memory allows Redis to work with datasets bigger than the actual
# amount of RAM needed to hold the whole dataset in memory.
# In order to do so very used keys are taken in memory while the other keys
# are swapped into a swap file, similarly to what operating systems do
# with memory pages.
# 指定是否启用虚拟内存机制，默认值为no，
# VM机制将数据分页存放，由Redis将访问量较少的页即冷数据swap到磁盘上，访问多的页面由磁盘自动换出到内存中
# 把vm-enabled设置为yes，根据需要设置好接下来的三个VM参数，就可以启动VM了
vm-enabled no
# vm-enabled yes

# This is the path of the Redis swap file. As you can guess, swap files
# can't be shared by different Redis instances, so make sure to use a swap
# file for every redis process you are running. Redis will complain if the
# swap file is already in use.
#
# Redis交换文件最好的存储是SSD（固态硬盘）
# 虚拟内存文件路径，默认值为/tmp/redis.swap，不可多个Redis实例共享
# *** WARNING *** if you are using a shared hosting the default of putting
# the swap file under /tmp is not secure. Create a dir with access granted
# only to Redis user and configure Redis to create the swap file there.
vm-swap-file /tmp/redis.swap

# With vm-max-memory 0 the system will swap everything it can. Not a good
# default, just specify the max amount of RAM you can in bytes, but it's
# better to leave some margin. For instance specify an amount of RAM
# that's more or less between 60 and 80% of your free RAM.
# 将所有大于vm-max-memory的数据存入虚拟内存，无论vm-max-memory设置多少，所有索引数据都是内存存储的（Redis的索引数据就是keys）
# 也就是说当vm-max-memory设置为0的时候，其实是所有value都存在于磁盘。默认值为0
vm-max-memory 0

# Redis swap文件分成了很多的page，一个对象可以保存在多个page上面，但一个page上不能被多个对象共享，vm-page-size是要根据存储的数据大小来设定的。
# 建议如果存储很多小对象，page大小最后设置为32或64bytes；如果存储很大的对象，则可以使用更大的page，如果不确定，就使用默认值
vm-page-size 32

# 设置swap文件中的page数量由于页表（一种表示页面空闲或使用的bitmap）是存放在内存中的，在磁盘上每8个pages将消耗1byte的内存
# swap空间总容量为 vm-page-size * vm-pages
#
# With the default of 32-bytes memory pages and 134217728 pages Redis will
# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
#
# It's better to use the smallest acceptable value for your application,
# but the default is large in order to work in most conditions.
vm-pages 134217728

# Max number of VM I/O threads running at the same time.
# This threads are used to read/write data from/to swap file, since they
# also encode and decode objects from disk to memory or the reverse, a bigger
# number of threads can help with big objects even if they can't help with
# I/O itself as the physical device may not be able to couple with many
# reads/writes operations at the same time.
# 设置访问swap文件的I/O线程数，最后不要超过机器的核数，如果设置为0，那么所有对swap文件的操作都是串行的，可能会造成比较长时间的延迟，默认值为4
vm-max-threads 4

############################### ADVANCED CONFIG ###############################

# Hashes are encoded in a special way (much more memory efficient) when they
# have at max a given numer of elements, and the biggest element does not
# exceed a given threshold. You can configure this limits with the following
# configuration directives.
# 指定在超过一定的数量或者最大的元素超过某一临界值时，采用一种特殊的哈希算法
hash-max-zipmap-entries 512
hash-max-zipmap-value 64

# Similarly to hashes, small lists are also encoded in a special way in order
# to save a lot of space. The special representation is only used when
# you are under the following limits:
list-max-ziplist-entries 512
list-max-ziplist-value 64

# Sets have a special encoding in just one case: when a set is composed
# of just strings that happens to be integers in radix 10 in the range
# of 64 bit signed integers.
# The following configuration setting sets the limit in the size of the
# set in order to use this special memory saving encoding.
set-max-intset-entries 512

# Similarly to hashes and lists, sorted sets are also specially encoded in
# order to save a lot of space. This encoding is only used when the length and
# elements of a sorted set are below the following limits:
zset-max-ziplist-entries 128
zset-max-ziplist-value 64

# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
# order to help rehashing the main Redis hash table (the one mapping top-level
# keys to values). The hash table implementation redis uses (see dict.c)
# performs a lazy rehashing: the more operation you run into an hash table
# that is rhashing, the more rehashing "steps" are performed, so if the
# server is idle the rehashing is never complete and some more memory is used
# by the hash table.
# 
# The default is to use this millisecond 10 times every second in order to
# active rehashing the main dictionaries, freeing memory when possible.
#
# If unsure:
# use "activerehashing no" if you have hard latency requirements and it is
# not a good thing in your environment that Redis can reply form time to time
# to queries with 2 milliseconds delay.
# 指定是否激活重置哈希，默认为开启
activerehashing yes

################################## INCLUDES 头文件 ###################################

# 指定包含其他的配置文件，可以在同一主机上多个Redis实例之间使用同一份配置文件，而同时各实例又拥有自己的特定配置文件
# include /path/to/local.conf
# include /path/to/other.conf

转载地址：redis.conf配置文件说明