搞了几天,无法在PQ_TOOL中显示视频,最后用了目前最新版本的SDK(V100R001C01SPC070),总算能在PQ_TOOL中显示视频了
但是是YUV的,速度很慢,仍然无法找到PC端的ittb_stream.exe插件
以下是我调试过程:
1、在C070版本的SDK基础上,加载好sensor,SDK版本一定要一致,否则单板PQ_TOOL运行会出错。
2、进入Hi3516A_Stream_V1.0.7.0,这里有个readme,但是写的含糊不清,还不如看HiIspTool.sh的帮助,
运行./HiIspTool.sh,会显示帮助,使用方法写的很清楚:
To start only the ittb_stream and obtain initial configurations from the board, run ./HiIspTool.sh -s -p filename.(filename: name of the configuration file)
To start only the ittb_stream and obtain initial configurations from the PC, run ./HiIspTool.sh -s -s.
To start only the ittb_control, run ./HiIspTool.sh -c.
To start full services and obtain initial configurations from the board, run ./HiIspTool.sh -a -p filename.(filename: name of the configuration file)
To start full services and obtain initial configurations from the PC, run ./HiIspTool.sh -a -s.
Help: ./HiIspTool.sh -h
Note ,All initial configuration files are stored in the release\configs directory.
这里我选择启动所有服务,运行命令为:
./HiIspTool.sh -a -p imx178_5m.ini
启动后,单板会创建两个进程,ps结果:
1101 root 0:38 ./ittb_stream -p imx178_5m.ini
1108 root 0:15 ./ittb_control
其中,ittb_control就是控制部分,ittb_stream 就是视频流,这样,PC端的PQ_TOOL工具,就可以获取视频了
3、PC端启动PQ_TOOL,选择“HiPQ 3A Analyzer”,image源选择“VPSS”或“VO”,不知道为什么不能选择“VI”
然后视频就一张一张的出来,由于是YUV格式的,速度2秒一张,蜗牛
注:SDK版本一定要一致,不能一些用C050版本的,一些东西又用C070版本的。