ARM Linux 如何--注册和触发--软中断

最新推荐文章于 2024-01-02 18:18:00 发布

Arrow

最新推荐文章于 2024-01-02 18:18:00 发布

阅读量6k

点赞数

分类专栏： Linux Kernel 文章标签： linux timer action system callback struct

本文链接：https://blog.csdn.net/myarrow/article/details/7064060

版权

Linux Kernel 专栏收录该内容

49 篇文章 23 订阅

订阅专栏

1. 注册软中断当然是通过open_softirq

例子如下：

void __init init_timers(void)
{
	int err = timer_cpu_notify(&timers_nb, (unsigned long)CPU_UP_PREPARE,
				(void *)(long)smp_processor_id());

	init_timer_stats();

	BUG_ON(err == NOTIFY_BAD);
	register_cpu_notifier(&timers_nb);
	open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
}

void open_softirq(int nr, void (*action)(struct softirq_action *))
{
	softirq_vec[nr].action = action;
}

软中断TIMER_SOFTIRQ的中断处理函数为：run_timer_softirq

之所以成为softirq，是因为这些中断是由硬件中断来间接触发的,如何间接触发的呢：
硬件中断处理函数-->对软中断的相应位置位-->唤醒ksoftirqd线程-->执行软中断的中断处理函数

2. 硬件中断如何通过置位唤醒ksoftirqd线程

timer interrupt handler->
timer_tick->
update_process_times->
run_local_timers->
hrtimer_run_queues()和raise_softirq(TIMER_SOFTIRQ)->
raise_softirq_irqoff->
__raise_softirq_irqoff { or_softirq_pending(1UL << (nr)); }
即(local_softirq_pending() |= (x))

3. 如何执行软中断的action<中断处理函数>

对于TIMER_SOFTIRQ来说，每次system clock产生中断时，即一个tick 到来时，在system clock的中断处理函数中会调用run_local_timers来设置TIMER_SOFTIRQ触发条件；也就是当前CPU对应的irq_cpustat_t结构体中的__softirq_pending成员的第TIMER_SOFTIRQ个BIT被置为1。而当这个条件满足时，ksoftirqd线程(入口函数run_ksoftirqd,cpu_callback:kthread_create(run_ksoftirqd, hcpu, "ksoftirqd/%d", hotcpu);)会被唤醒，然后按照下面的流程调用TIMER_SOFTIRQ在数组softirq_vec中注册的action，即run_timer_softirq。
run_ksoftirqd--->do_softirq--->__do_softirq--->softirq_vec[TIMER_SOFTIRQ].action

static int run_ksoftirqd(void * __bind_cpu)
{
	set_current_state(TASK_INTERRUPTIBLE);

	while (!kthread_should_stop()) {
		preempt_disable();
		if (!local_softirq_pending()) {
			preempt_enable_no_resched();
			schedule();
			preempt_disable();
		}

		__set_current_state(TASK_RUNNING);

		while (local_softirq_pending()) {
			/* Preempt disable stops cpu going offline.
			   If already offline, we'll be on wrong CPU:
			   don't process */
			if (cpu_is_offline((long)__bind_cpu))
				goto wait_to_die;
			do_softirq();
			preempt_enable_no_resched();
			cond_resched();
			preempt_disable();
			rcu_sched_qs((long)__bind_cpu);
		}
		preempt_enable();
		set_current_state(TASK_INTERRUPTIBLE);
	}
	__set_current_state(TASK_RUNNING);
	return 0;

wait_to_die:
	preempt_enable();
	/* Wait for kthread_stop */
	set_current_state(TASK_INTERRUPTIBLE);
	while (!kthread_should_stop()) {
		schedule();
		set_current_state(TASK_INTERRUPTIBLE);
	}
	__set_current_state(TASK_RUNNING);
	return 0;
}