看好了就发邮件到dong.zhang@microsemi.com。
Position : Senior ASIC Design Engineer
Business Unit: ICSG - PS
Location: Shanghai, China
As a product development engineer in the Performance Storage group, you will work on developing our next generation SSD Controller products. This will involve taking a design from initial concept to production form. Throughout you will work beside experienced engineers and be exposed to Microsemi's Best-In-Class engineering practices.
Responsibilities:
Responsible for design of digital integrated circuits at the IP block level. Responsibilities include:
-
Contributing to the investigation and definition of a device feature set and requirements
-
Participating in micro-architecture and documentation
-
RTL design and verification at block level
-
Performing development activities such as Synthesis, Formal Verification, and Static Timing Analysis
-
The position might also include emulator and FPGA based HW and FW co-verification testing.
Qualifications:
-
Master’s degree with 3 years of experience
-
Proficient in VHDL or Verilog/System Verilog
-
Experience in designing, implementing and verifying VHDL or Verilog/System Verilog based designs
-
Experience with design and verification flow
-
Experience with ARM processors, PCIe, NAND flash, and DDR is an asset
-
Synthesis, Static Timing Analysis, and Logical Equivalency checking experience is an asset
-
Experience with FPGA emulation and verification is an asset
-
Good programming / scripting skills with languages such as TCL, C, and Perl
-
Excellent analytical and debugging skills
-
Excellent verbal and written communication skills in English
Position : Staff Firmware Engineer
Business Unit: ICSG - PS
Location: Shanghai, China
Job Description:
You will join a R&D team in design, development, verification and release of best-in-class firmware to Microsemi PCI Express switching products. Shanghai team, as part of Microsemi global R&D, closely collaborates with geographical architecture, chip design, validation, marketing and application engineering teams for successful product delivery. You will be responsible for developing and verifying the firmware solution based on PCIe, NVMe and storage technology.
Responsibilities:
-
Analyze technical requirements and build firmware module designs
-
Develop and verify state of art firmware on embedded system
-
Participate in specification, design and implementation review with peers
-
Use of storage testers, analyzer and other debug tools
-
Write and review engineering design document and customer guide
-
Debug and resolve defects reported from global customers
Basic Qualifications:
-
Master or Bachelor's degree in Electrical Engineering or Computer Science
-
8+ years working experience on Firmware development and verification
-
Strong C language programming and debugging
-
Excellent at both spoken and written English (passed CET-6)
-
Eager to learn, team-working, and good communications
-
Experience with SoC peripheral device driver development, I2C, UART, SMBUS, GPIO, Ethernet, DMA
Preferred Qualifications:
-
Mastery of PCI Express, NVMe, SAS, SATA, or USB technology is highly desired
-
Experience with storage enclosure management, Ethernet switching or virtualization software are plus
-
Experience with MIPS architecture, ThreadX are plus
Position : Senior Firmware Engineer
Business Unit: ICSG - PS
Location: Shanghai, China
Job Description:
You will join a R&D team in design, development, verification and release of best-in-class firmware to Microsemi PCI Express switching products. Shanghai team, as part of Microsemi global R&D, closely collaborates with geographical architecture, chip design, validation, marketing and application engineering teams for successful product delivery. You will be responsible for developing and verifying the firmware solution based on PCIe, NVMe and storage technology.
Responsibilities:
-
Understand firmware module design and implement the code and do unit test
-
Develop and execute verification test cases, and collect debug data
-
Use of storage testers, analyzer and other debug tools
-
Debug and resolve defects reported from internal and external teams
Basic Qualifications:
-
Master or Bachelor's degree in Electrical Engineering or Computer Science
-
4+ years working experience on Firmware development and verification
-
Strong C language programming and debugging
-
Excellent at both spoken and written English (passed CET-6)
-
Eager to learn, team-working, and good communications
Preferred Qualifications:
-
Experience with SoC peripheral device driver development, I2C, UART, SMBUS, GPIO, Ethernet, DMA are plus
-
Experience with script language, Linux shell, TCL, Perl, Python, are plus
Position : Staff Integration Engineer
Business Unit: ICSG - SS
Location: Hangzhou, China
As an Integrating Engineer you will be part of our Applications Engineering team. We are responsible for working closely with the Product Development teams, Product Validation teams, Marketing teams, and Sales teams to provide world-class customer technical support. We provide customer technical support to assist in design wins, customer product ramp, and customer product production. We offer a challenging and dynamic working environment with opportunities to make substantial contributions toward the success of our business.
Responsibilities:
-
Work at tier-1 customer site to plan and execute integration test plans to ensure interoperability of Microsemi storage products with Tier-1 data-center customers' platforms
-
Work closely with the customer and Microsemi internal teams to define system integration requirements, manage deliverables and support initial system integration bring-up to full production
-
Travel within China and internationally, as needed to work with Microsemi internal teams to plan lab tests, receive and provide training, and to resolve hardware and software issues for the market leading Microsemi storage devices product lines
Basic Qualifications:
-
Bachelors or Master degree in electrical or computer engineering or computing science
-
5+ years of engineering experience
-
Experience in the Storage Industry
-
Experience in any one of the serial bus or networking protocols (e.g. SAS, SATA, PCI-Express, Fibre Channel, Ethernet, TCP/IP, etc.)
-
Experience with board-level bring-up and test
-
Experience with SW and FW bring-up and test
-
Good communication skills in both Chinese and English
-
Customer facing experience
Preferred Qualifications:
-
Experience in hardware development, ASIC or board design
-
Understanding of storage architectures, SAS, SATA, PCIe, RAID, expanders or protocol controllers
-
Experience in storage firmware and software, embedded processors (i.e. MIPS), embedded kernels (ThreadX, VxWorks, etc.), Unix &Wintel drivers, debuggers (JTAG, serial port, Green Hills)
Job Title: Regional Sales Manager
BU: Corporate Sales
Location: Beijing or Shanghai, China
Responsibilities:
-
Developing account penetration plans and working closely with field applications engineering team to create, develop, and close business at key strategic accounts, and build strong customer relationships
-
Responsible for execution of sales strategy in assigned territory
-
Responsible for revenue plan management and annual design win plan management
-
Develop excellent relationships with representatives at key accounts and channel partners
-
Managing local distributor resources to track potential Tier 1/2 customer
-
Select channel partners, motivate, measure and review sales performance in each territory
-
Provide feedback to marketing group on customers strategy and market needs
-
Build strong internal communication with Business Divisions and Microsemi Executives
Background: Experience and Education:
-
Bachelor Degree in Electrical Engineering or related field
-
5+ Years Sales experience in Semiconductor or IT Systems end markets or technical support position
-
Telecom / Industry Segment experience is desirable
-
Demonstrated ability to effectively manage sales channel partners (Sales Representatives and Distribution)
-
Demonstrated ability to grow and manage complex customer relationships
-
Knowledge and relationship of key customers
-
Demonstrated track record of success in growing sales and market share in a technically related field
Job Skills and Knowledge:
-
Strong Communication Skills in English and Chinese
-
Understand Complex Product Design in Cycle
-
Leadership skills
-
Comfortable selling to and interfacing with top management at key customers
Desirable Qualities:
-
Strong work ethic
-
Highly motivated, bring high energy level to job
-
Work in cross functional/organizational selling teams
-
Follows corporate strategy and direction
-
Work within organizational policies and practices
-
Strong planning and organization
-
Sets goals and objectives
-
Impeccably honest
Will Enjoy:
-
Working with customers / partners
-
Work in results orientated environment
-
Willing to travel
Job Title: District Sales Manager
BU: Corporate Sales
Location: Beijing or Chengdu, China
Responsibilities:
Manages the sale of the organization's products or services to Original Equipment Manufacturer (OEM) or Value Added Reseller (VAR) accounts on a national or geographic basis. Incumbents at the Director and Senior Director level typically manage other sales managers. Incumbents at the Manager level may manage only individual contributor sales account managers or may manage the organization's relationship with resellers or agents; they also may carry their own sales quota. The incumbent's level may be determined by the size of the geographic area of responsibility (e.g., region vs. district vs. branch), the size or significance of the industry or product segment for which the incumbent is responsible, or other factors.
-
Achieve the target goal (Booking/Billing) Quarterly & Annually
-
Product promotion & Business development on Industrial or Communication Market
-
Follow up the KSO, DI & DW status regularly -- reasons for DW/DL
-
Tracking the transferring programs
-
Rep/Disty management -- Pushing orders, check inventory, POS & FCST
-
Collect Marketing information -- Competition, SWOT & Future Trend
-
Travel in China for key accounts w/ or w/o Rep/Disty
-
Good communication with Factories & Rep/Disty
Qualifications:
-
University degree or above; Any additional training in program/project management is a plus.
-
+7 years sales or marketing experience in electronic business. Industrial & Power related market experience is a plus.
-
Good communication and command - verbal and written in both English, Chinese
-
Team player being studious, aggressive and outgoing
-
Familiar with International Trading
-
Familiar with FPGA products and communication customers