windows系统下配置PCL1.8.0和VS2013

PCL 作为一个优秀的点云类开源库集成了大量先进的点云处理算法，值得LiDAR工作者研究学习。从最初使用PCL1.6版本到1.7再到1.8，已经经历了几个年头，PCL中的算法也再不断更新完善。现在重写这篇博客，从最基础的PCL配置做起。PCL的配置与开发环境有关，本文在windows 7 64位系统下以32位PCL配置为例进行讲解。

windows 64位系统下，可以开发32位软件和64位软件，我本人会将32和64位的PCL同时安装在系统下，其他朋友可以根据选择安装相应版本的PCL，安装过程和本文所述过程一致。

安装VS2013

VS2013旗舰版不区分32位或64位系统，本人使用的是旗舰版VS2013安装过程简单，在此不再赘述。

安装PCL1.8.0

PCL各个版本的安装、配置过程都是一致的，都可以参考博文中方法。

下载PCL

图中分别是32位和64位windows下和VS2013配套的PCL1.8.0版本

下载链接：链接：http://pan.baidu.com/s/1kVn3X6v 密码：skqc

安装PCL

安装过程中我会把必要过程截图出来，未做截图说明的，默认即可。

修改安装路径。默认的安装路径中有空格，自定义路径应避免空格和中文字符出现。一般使用选择默认路径即可，因为笔者会基于PCL+Qt做开发或编译时，当路径中有空格时候会影响Qt和PCL的集成。若单独使用PCL路径中有无空格无关紧要。


安装过程中会弹出OpenNI的安装（前面安装组件时，默认是选择安装的），安装可以选择默认路径，这里本人修改了安装路径如图。


整个安装过程会持续10分钟左右，耐心等待即可。

配置

添加环境变量

根据自己安装的路径将下面文件的路径添加到图中系统环境变量中，添加完毕后不要忘记了重启或者注销电脑。

D:\CLibrary\PCL1.8.0\PCL1.8.0X86\bin
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\FLANN\bin
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\Qhull\bin
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\VTK\bin
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\OpenNI2\Tools

新建一个工程

新建win32控制台程序，空项目。

新建属性表

使用建属性表的方式配置PCL的优点有：1.下次项目直接添加该属性表到工程里即完成PCL的配置，简化配置过程；2.便于管理，可以配置多种属性表；3.不使用PCL的项目不受配置的影响，提升其它项目的编译速度。

打开属性管理器

新建一个属性表：命名位PCL1.8.0Debug，发布应用时会使用Release版本的，调试时使用Debug作为区别。因为博文中安装的是32位PCL，又因为测试Debug版本，所以再Debug|Win32下新建属性表。打开该属性表，进行配置。

添加包含目录。

D:\CLibrary\PCL1.8.0\PCL1.8.0X86\include\pcl-1.8
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\Boost\include\boost-1_59
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\Eigen\include\eigen3
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\FLANN\include
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\Qhull\include
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\VTK\include\vtk-7.0
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\OpenNI2\Include

添加库目录

D:\CLibrary\PCL1.8.0\PCL1.8.0X86\lib
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\Boost\lib
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\FLANN\lib
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\Qhull\lib
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\3rdParty\VTK\lib
D:\CLibrary\PCL1.8.0\PCL1.8.0X86\OpenNI2\Lib

添加附加依赖项，这里添加的Debug版本的lib文件，当发布应用的时候要使用Release版本的。调试Debug和发布Release区别很大，效率也不一样，具体区别可以问度娘。

下面是debug版本的静态库，这么lib文件，如果一个个去选择那就费时费力了。

本人 这篇博客中脚本可以方便的将lib文件名提取到文本中。

debug版本的lib文件：

pcl_common_debug.lib
pcl_features_debug.lib
pcl_filters_debug.lib
pcl_io_debug.lib
pcl_io_ply_debug.lib
pcl_kdtree_debug.lib
pcl_keypoints_debug.lib
pcl_ml_debug.lib
pcl_octree_debug.lib
pcl_outofcore_debug.lib
pcl_people_debug.lib
pcl_recognition_debug.lib
pcl_registration_debug.lib
pcl_sample_consensus_debug.lib
pcl_search_debug.lib
pcl_segmentation_debug.lib
pcl_stereo_debug.lib
pcl_surface_debug.lib
pcl_tracking_debug.lib
pcl_visualization_debug.lib
libboost_atomic-vc120-mt-gd-1_59.lib
libboost_chrono-vc120-mt-gd-1_59.lib
libboost_container-vc120-mt-gd-1_59.lib
libboost_context-vc120-mt-gd-1_59.lib
libboost_coroutine-vc120-mt-gd-1_59.lib
libboost_date_time-vc120-mt-gd-1_59.lib
libboost_exception-vc120-mt-gd-1_59.lib
libboost_filesystem-vc120-mt-gd-1_59.lib
libboost_graph-vc120-mt-gd-1_59.lib
libboost_iostreams-vc120-mt-gd-1_59.lib
libboost_locale-vc120-mt-gd-1_59.lib
libboost_log-vc120-mt-gd-1_59.lib
libboost_log_setup-vc120-mt-gd-1_59.lib
libboost_math_c99-vc120-mt-gd-1_59.lib
libboost_math_c99f-vc120-mt-gd-1_59.lib
libboost_math_c99l-vc120-mt-gd-1_59.lib
libboost_math_tr1-vc120-mt-gd-1_59.lib
libboost_math_tr1f-vc120-mt-gd-1_59.lib
libboost_math_tr1l-vc120-mt-gd-1_59.lib
libboost_mpi-vc120-mt-gd-1_59.lib
libboost_prg_exec_monitor-vc120-mt-gd-1_59.lib
libboost_program_options-vc120-mt-gd-1_59.lib
libboost_random-vc120-mt-gd-1_59.lib
libboost_regex-vc120-mt-gd-1_59.lib
libboost_serialization-vc120-mt-gd-1_59.lib
libboost_signals-vc120-mt-gd-1_59.lib
libboost_system-vc120-mt-gd-1_59.lib
libboost_test_exec_monitor-vc120-mt-gd-1_59.lib
libboost_thread-vc120-mt-gd-1_59.lib
libboost_timer-vc120-mt-gd-1_59.lib
libboost_unit_test_framework-vc120-mt-gd-1_59.lib
libboost_wave-vc120-mt-gd-1_59.lib
libboost_wserialization-vc120-mt-gd-1_59.lib
flann_cpp_s-gd.lib
flann_s-gd.lib
qhull-gd.lib
qhullcpp-gd.lib
qhullstatic-gd.lib
qhullstatic_r-gd.lib
qhull_p-gd.lib
qhull_r-gd.lib
vtkalglib-7.0-gd.lib
vtkChartsCore-7.0-gd.lib
vtkCommonColor-7.0-gd.lib
vtkCommonComputationalGeometry-7.0-gd.lib
vtkCommonCore-7.0-gd.lib
vtkCommonDataModel-7.0-gd.lib
vtkCommonExecutionModel-7.0-gd.lib
vtkCommonMath-7.0-gd.lib
vtkCommonMisc-7.0-gd.lib
vtkCommonSystem-7.0-gd.lib
vtkCommonTransforms-7.0-gd.lib
vtkDICOMParser-7.0-gd.lib
vtkDomainsChemistry-7.0-gd.lib
vtkDomainsChemistryOpenGL2-7.0-gd.lib
vtkexoIIc-7.0-gd.lib
vtkexpat-7.0-gd.lib
vtkFiltersAMR-7.0-gd.lib
vtkFiltersCore-7.0-gd.lib
vtkFiltersExtraction-7.0-gd.lib
vtkFiltersFlowPaths-7.0-gd.lib
vtkFiltersGeneral-7.0-gd.lib
vtkFiltersGeneric-7.0-gd.lib
vtkFiltersGeometry-7.0-gd.lib
vtkFiltersHybrid-7.0-gd.lib
vtkFiltersHyperTree-7.0-gd.lib
vtkFiltersImaging-7.0-gd.lib
vtkFiltersModeling-7.0-gd.lib
vtkFiltersParallel-7.0-gd.lib
vtkFiltersParallelImaging-7.0-gd.lib
vtkFiltersProgrammable-7.0-gd.lib
vtkFiltersSelection-7.0-gd.lib
vtkFiltersSMP-7.0-gd.lib
vtkFiltersSources-7.0-gd.lib
vtkFiltersStatistics-7.0-gd.lib
vtkFiltersTexture-7.0-gd.lib
vtkFiltersVerdict-7.0-gd.lib
vtkfreetype-7.0-gd.lib
vtkGeovisCore-7.0-gd.lib
vtkglew-7.0-gd.lib
vtkGUISupportQt-7.0-gd.lib
vtkGUISupportQtSQL-7.0-gd.lib
vtkhdf5-7.0-gd.lib
vtkhdf5_hl-7.0-gd.lib
vtkImagingColor-7.0-gd.lib
vtkImagingCore-7.0-gd.lib
vtkImagingFourier-7.0-gd.lib
vtkImagingGeneral-7.0-gd.lib
vtkImagingHybrid-7.0-gd.lib
vtkImagingMath-7.0-gd.lib
vtkImagingMorphological-7.0-gd.lib
vtkImagingSources-7.0-gd.lib
vtkImagingStatistics-7.0-gd.lib
vtkImagingStencil-7.0-gd.lib
vtkInfovisCore-7.0-gd.lib
vtkInfovisLayout-7.0-gd.lib
vtkInteractionImage-7.0-gd.lib
vtkInteractionStyle-7.0-gd.lib
vtkInteractionWidgets-7.0-gd.lib
vtkIOAMR-7.0-gd.lib
vtkIOCore-7.0-gd.lib
vtkIOEnSight-7.0-gd.lib
vtkIOExodus-7.0-gd.lib
vtkIOExport-7.0-gd.lib
vtkIOGeometry-7.0-gd.lib
vtkIOImage-7.0-gd.lib
vtkIOImport-7.0-gd.lib
vtkIOInfovis-7.0-gd.lib
vtkIOLegacy-7.0-gd.lib
vtkIOLSDyna-7.0-gd.lib
vtkIOMINC-7.0-gd.lib
vtkIOMovie-7.0-gd.lib
vtkIONetCDF-7.0-gd.lib
vtkIOParallel-7.0-gd.lib
vtkIOParallelXML-7.0-gd.lib
vtkIOPLY-7.0-gd.lib
vtkIOSQL-7.0-gd.lib
vtkIOVideo-7.0-gd.lib
vtkIOXML-7.0-gd.lib
vtkIOXMLParser-7.0-gd.lib
vtkjpeg-7.0-gd.lib
vtkjsoncpp-7.0-gd.lib
vtklibxml2-7.0-gd.lib
vtkmetaio-7.0-gd.lib
vtkNetCDF-7.0-gd.lib
vtkNetCDF_cxx-7.0-gd.lib
vtkoggtheora-7.0-gd.lib
vtkParallelCore-7.0-gd.lib
vtkpng-7.0-gd.lib
vtkproj4-7.0-gd.lib
vtkRenderingAnnotation-7.0-gd.lib
vtkRenderingContext2D-7.0-gd.lib
vtkRenderingContextOpenGL2-7.0-gd.lib
vtkRenderingCore-7.0-gd.lib
vtkRenderingFreeType-7.0-gd.lib
vtkRenderingImage-7.0-gd.lib
vtkRenderingLabel-7.0-gd.lib
vtkRenderingLOD-7.0-gd.lib
vtkRenderingOpenGL2-7.0-gd.lib
vtkRenderingQt-7.0-gd.lib
vtkRenderingVolume-7.0-gd.lib
vtkRenderingVolumeOpenGL2-7.0-gd.lib
vtksqlite-7.0-gd.lib
vtksys-7.0-gd.lib
vtktiff-7.0-gd.lib
vtkverdict-7.0-gd.lib
vtkViewsContext2D-7.0-gd.lib
vtkViewsCore-7.0-gd.lib
vtkViewsInfovis-7.0-gd.lib
vtkViewsQt-7.0-gd.lib
vtkzlib-7.0-gd.lib
OpenNI2.lib

release版本的lib文件（本博客中使用的是debug版本的）：

pcl_common_release.lib
pcl_features_release.lib
pcl_filters_release.lib
pcl_io_ply_release.lib
pcl_io_release.lib
pcl_kdtree_release.lib
pcl_keypoints_release.lib
pcl_ml_release.lib
pcl_octree_release.lib
pcl_outofcore_release.lib
pcl_people_release.lib
pcl_recognition_release.lib
pcl_registration_release.lib
pcl_sample_consensus_release.lib
pcl_search_release.lib
pcl_segmentation_release.lib
pcl_stereo_release.lib
pcl_surface_release.lib
pcl_tracking_release.lib
pcl_visualization_release.lib
libboost_atomic-vc120-mt-1_59.lib
libboost_chrono-vc120-mt-1_59.lib
libboost_container-vc120-mt-1_59.lib
libboost_context-vc120-mt-1_59.lib
libboost_coroutine-vc120-mt-1_59.lib
libboost_date_time-vc120-mt-1_59.lib
libboost_exception-vc120-mt-1_59.lib
libboost_filesystem-vc120-mt-1_59.lib
libboost_graph-vc120-mt-1_59.lib
libboost_iostreams-vc120-mt-1_59.lib
libboost_locale-vc120-mt-1_59.lib
libboost_log-vc120-mt-1_59.lib
libboost_log_setup-vc120-mt-1_59.lib
libboost_math_c99-vc120-mt-1_59.lib
libboost_math_c99f-vc120-mt-1_59.lib
libboost_math_c99l-vc120-mt-1_59.lib
libboost_math_tr1-vc120-mt-1_59.lib
libboost_math_tr1f-vc120-mt-1_59.lib
libboost_math_tr1l-vc120-mt-1_59.lib
libboost_mpi-vc120-mt-1_59.lib
libboost_prg_exec_monitor-vc120-mt-1_59.lib
libboost_program_options-vc120-mt-1_59.lib
libboost_random-vc120-mt-1_59.lib
libboost_regex-vc120-mt-1_59.lib
libboost_serialization-vc120-mt-1_59.lib
libboost_signals-vc120-mt-1_59.lib
libboost_system-vc120-mt-1_59.lib
libboost_test_exec_monitor-vc120-mt-1_59.lib
libboost_thread-vc120-mt-1_59.lib
libboost_timer-vc120-mt-1_59.lib
libboost_unit_test_framework-vc120-mt-1_59.lib
libboost_wave-vc120-mt-1_59.lib
libboost_wserialization-vc120-mt-1_59.lib
flann_cpp_s.lib
flann_s.lib
qhull.lib
qhullcpp.lib
qhullstatic.lib
qhullstatic_r.lib
qhull_p.lib
qhull_r.lib
vtkalglib-7.0.lib
vtkChartsCore-7.0.lib
vtkCommonColor-7.0.lib
vtkCommonComputationalGeometry-7.0.lib
vtkCommonCore-7.0.lib
vtkCommonDataModel-7.0.lib
vtkCommonExecutionModel-7.0.lib
vtkCommonMath-7.0.lib
vtkCommonMisc-7.0.lib
vtkCommonSystem-7.0.lib
vtkCommonTransforms-7.0.lib
vtkDICOMParser-7.0.lib
vtkDomainsChemistry-7.0.lib
vtkDomainsChemistryOpenGL2-7.0.lib
vtkexoIIc-7.0.lib
vtkexpat-7.0.lib
vtkFiltersAMR-7.0.lib
vtkFiltersCore-7.0.lib
vtkFiltersExtraction-7.0.lib
vtkFiltersFlowPaths-7.0.lib
vtkFiltersGeneral-7.0.lib
vtkFiltersGeneric-7.0.lib
vtkFiltersGeometry-7.0.lib
vtkFiltersHybrid-7.0.lib
vtkFiltersHyperTree-7.0.lib
vtkFiltersImaging-7.0.lib
vtkFiltersModeling-7.0.lib
vtkFiltersParallel-7.0.lib
vtkFiltersParallelImaging-7.0.lib
vtkFiltersProgrammable-7.0.lib
vtkFiltersSelection-7.0.lib
vtkFiltersSMP-7.0.lib
vtkFiltersSources-7.0.lib
vtkFiltersStatistics-7.0.lib
vtkFiltersTexture-7.0.lib
vtkFiltersVerdict-7.0.lib
vtkfreetype-7.0.lib
vtkGeovisCore-7.0.lib
vtkglew-7.0.lib
vtkGUISupportQt-7.0.lib
vtkGUISupportQtSQL-7.0.lib
vtkhdf5-7.0.lib
vtkhdf5_hl-7.0.lib
vtkImagingColor-7.0.lib
vtkImagingCore-7.0.lib
vtkImagingFourier-7.0.lib
vtkImagingGeneral-7.0.lib
vtkImagingHybrid-7.0.lib
vtkImagingMath-7.0.lib
vtkImagingMorphological-7.0.lib
vtkImagingSources-7.0.lib
vtkImagingStatistics-7.0.lib
vtkImagingStencil-7.0.lib
vtkInfovisCore-7.0.lib
vtkInfovisLayout-7.0.lib
vtkInteractionImage-7.0.lib
vtkInteractionStyle-7.0.lib
vtkInteractionWidgets-7.0.lib
vtkIOAMR-7.0.lib
vtkIOCore-7.0.lib
vtkIOEnSight-7.0.lib
vtkIOExodus-7.0.lib
vtkIOExport-7.0.lib
vtkIOGeometry-7.0.lib
vtkIOImage-7.0.lib
vtkIOImport-7.0.lib
vtkIOInfovis-7.0.lib
vtkIOLegacy-7.0.lib
vtkIOLSDyna-7.0.lib
vtkIOMINC-7.0.lib
vtkIOMovie-7.0.lib
vtkIONetCDF-7.0.lib
vtkIOParallel-7.0.lib
vtkIOParallelXML-7.0.lib
vtkIOPLY-7.0.lib
vtkIOSQL-7.0.lib
vtkIOVideo-7.0.lib
vtkIOXML-7.0.lib
vtkIOXMLParser-7.0.lib
vtkjpeg-7.0.lib
vtkjsoncpp-7.0.lib
vtklibxml2-7.0.lib
vtkmetaio-7.0.lib
vtkNetCDF-7.0.lib
vtkNetCDF_cxx-7.0.lib
vtkoggtheora-7.0.lib
vtkParallelCore-7.0.lib
vtkpng-7.0.lib
vtkproj4-7.0.lib
vtkRenderingAnnotation-7.0.lib
vtkRenderingContext2D-7.0.lib
vtkRenderingContextOpenGL2-7.0.lib
vtkRenderingCore-7.0.lib
vtkRenderingFreeType-7.0.lib
vtkRenderingImage-7.0.lib
vtkRenderingLabel-7.0.lib
vtkRenderingLOD-7.0.lib
vtkRenderingOpenGL2-7.0.lib
vtkRenderingQt-7.0.lib
vtkRenderingVolume-7.0.lib
vtkRenderingVolumeOpenGL2-7.0.lib
vtksqlite-7.0.lib
vtksys-7.0.lib
vtktiff-7.0.lib
vtkverdict-7.0.lib
vtkViewsContext2D-7.0.lib
vtkViewsCore-7.0.lib
vtkViewsInfovis-7.0.lib
vtkViewsQt-7.0.lib
vtkzlib-7.0.lib

测试

#include <pcl/visualization/cloud_viewer.h>
#include <iostream>
#include <pcl/io/io.h>
#include <pcl/io/pcd_io.h>
int user_data;
void viewerOneOff(pcl::visualization::PCLVisualizer& viewer)
{
    viewer.setBackgroundColor(1.0, 0.5, 1.0);
    pcl::PointXYZ o;
    o.x = 1.0;
    o.y = 0;
    o.z = 0;
    viewer.addSphere(o, 0.25, "sphere", 0);
    std::cout << "i only run once" << std::endl;

}

void viewerPsycho(pcl::visualization::PCLVisualizer& viewer)
{
    static unsigned count = 0;
    std::stringstream ss;
    ss << "Once per viewer loop: " << count++;
    viewer.removeShape("text", 0);
    viewer.addText(ss.str(), 200, 300, "text", 0);

    //FIXME: possible race condition here:
    user_data++;
}

int main()
{
    pcl::PointCloud<pcl::PointXYZRGBA>::Ptr cloud(new pcl::PointCloud<pcl::PointXYZRGBA>);
    pcl::io::loadPCDFile("example.pcd的位置", *cloud);

    pcl::visualization::CloudViewer viewer("Cloud Viewer");

    //blocks until the cloud is actually rendered
    viewer.showCloud(cloud);

    //use the following functions to get access to the underlying more advanced/powerful
    //PCLVisualizer

    //This will only get called once
    viewer.runOnVisualizationThreadOnce(viewerOneOff);

    //This will get called once per visualization iteration
    viewer.runOnVisualizationThread(viewerPsycho);
    while (!viewer.wasStopped())
    {
        //you can also do cool processing here
        //FIXME: Note that this is running in a separate thread from viewerPsycho
        //and you should guard against race conditions yourself...
        user_data++;
    }
    return 0;
}

出现错误

c:\program files (x86)\microsoft visual studio 12.0\vc\include\xmemory(348): error C4996: 'std::_Uninitialized_copy0': Function call with parameters that may be unsafe - this call relies on the caller to check that the passed values are correct. To disable this warning, use -D_SCL_SECURE_NO_WARNINGS

解决方法

预处理器中添加：_SCL_SECURE_NO_WARNINGS即可。


配置成功，到这里配置也就结束了，希望你配置顺利。

提示1：VS默认是32位工程，若需要配置64位，方法和博文中过程一样。只是在VS中配置64位的库即可。

这是64库时的选项。

提示2：release和debug版本的配置过程一致，过程中注意静态链接库使用release版本的，vs中选择release的属性表和编译release版本的工程即可。

结语

博文中所述过程对于PCL各个版本和windows各个系统版本都有效。下载正确的PCL和VS版本，是配置的前提。从PCL All in one安装包名称可以了解PCL版本及需要的VS版本或系统位数。