CH32V203/208-DMA

最新推荐文章于 2024-06-11 20:12:33 发布

无上魔龙大帝

最新推荐文章于 2024-06-11 20:12:33 发布

阅读量232

点赞数 1

文章标签：学习

本文链接：https://blog.csdn.net/2303_77110668/article/details/131596853

版权

DMA外设映射：

外设	通道1	通道 2	通道3	通道4	通道5	通道6	通道7
ADC	ADC
SPIx		SPII_RX	SPII_TX	SPI2_RX	SPI2_TX
USARTx		USART3_ TX	USART3_ RX	USARTI_ TX	USARTI_ RX	USART2_ TX	USART2_ RX
TIM1		TIM1_ CH1	TIM1_CH2	TIM1_CH4 TIM1_TRIG TIM1_COM	TIM1_UP	TIM1_CH3
TIM2	TIM2_ CH3	TIM2_ UP			TIM2_CH1		TIM2_CH2 TIM2_CH4
TIM3		TIM3_ CH3	TIM3_CH4 TIM3_UP			TIM3_CH1 TIM3_TRIGI
TIM4	TIM4_ CH1			TIM4_CH2	TIM4_CH3		TIM4_UP

代码：（参考沁恒例程程序修改）

#if cmd_status_board==3
u8 DMA_Finish_Flag=0;


//比较字符
u8 BufCmp(u32 *buf1, u32 *buf2, u16 buflength)
{
    while(buflength--)
    {
        if(*buf1 != *buf2)
        {
            return 0;
        }
        buf1++;
        buf2++;
    }
    return 1;
}

void DMA1_CH3_Init(void)
{
    DMA_InitTypeDef  DMA_InitStructure;
    RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);

    DMA_StructInit(&DMA_InitStructure);
    DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)SRC_BUF;
    DMA_InitStructure.DMA_MemoryBaseAddr = (u32)DST_BUF;
    DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
    DMA_InitStructure.DMA_BufferSize = Buf_Size * 4;//32*4
    DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
    DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
    DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
    DMA_InitStructure.DMA_MemoryDataSize = DMA_PeripheralDataSize_Byte;
    DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
    DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
    DMA_InitStructure.DMA_M2M = DMA_M2M_Enable;
    DMA_Init(DMA1_Channel3, &DMA_InitStructure);
    DMA_ClearFlag(DMA1_FLAG_TC3);

    DMA_Cmd(DMA1_Channel3, ENABLE);
}

void setup_DMA()
{
    u8 i_DMA_COUNT=0;

    DMA1_CH3_Init();
    while(DMA_GetFlagStatus(DMA1_FLAG_TC3) == RESET)
        {
        }
        DMA_Finish_Flag= BufCmp(SRC_BUF, DST_BUF, Buf_Size);
        if(DMA_Finish_Flag == 0)
        {
            printf("DMA Transfer Fail\r\n");
        }
        else
        {
            printf("DMA Transfer Success\r\n");
        }


        printf("SRC_BUF:\r\n");
        for(i_DMA_COUNT = 0; i_DMA_COUNT < Buf_Size; i_DMA_COUNT++) {
            printf("0x%08x\r\n", SRC_BUF[i_DMA_COUNT]);
        }

        printf("DST_BUF:\r\n");
        for(i_DMA_COUNT = 0;i_DMA_COUNT < Buf_Size; i_DMA_COUNT++){
            printf("0x%08x\r\n", DST_BUF[i_DMA_COUNT]);
        }
}
#endif