实验六STM32串口仿真

闲人793

于 2024-06-30 00:55:17 发布

阅读量413

点赞数 4

文章标签：单片机物联网嵌入式硬件

本文链接：https://blog.csdn.net/2403_83425367/article/details/140073296

版权

利用已经建立的工程模板，在Keil for ARM V5中编写代码，使用串口仿真电路，实现如下功能：配置串口1，使得串口循环输出自己的学号（以字符串形式）。

main.c

#include "stm32f10x.h"
#include "oled.h"
#include "delay.h"
#include "adc.h"
#include "bsp_clkconfig.h"


int main()
{
	HSE_SetSysClock(RCC_PLLMul_7);
  adc_Init(9600);
	while(1)
	{
		U_Sendch("输入学号 ");
		delay(100);
	}
}

adc.c

#include "adc.h"
#include "delay.h"

void adc_Init(u16 bound)
{
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1, ENABLE); 
	
	GPIO_InitTypeDef GPIO_InitStructure;
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
	GPIO_Init(GPIOA, &GPIO_InitStructure); 
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
	GPIO_Init(GPIOA, &GPIO_InitStructure); 
	
	USART_InitTypeDef USART_InitStructure;
	USART_InitStructure.USART_BaudRate = bound;
	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
	USART_InitStructure.USART_StopBits = USART_StopBits_1;
	USART_InitStructure.USART_Parity = USART_Parity_No;
	USART_InitStructure.USART_HardwareFlowControl =
	USART_HardwareFlowControl_None;
	USART_InitStructure.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
	USART_Init(USART1, &USART_InitStructure);
	
	USART_Cmd(USART1 , ENABLE);
}

void U_Sendch(unsigned char ch[])
{
	int i = 0;
	while(ch[i])
	{
		while(USART_GetFlagStatus(USART1 , USART_FLAG_TC) == 0)
		{;}
		USART_SendData(USART1 , ch[i]);
		i++;
	}
}