This is a sequential circuit. Read the simulation waveforms to determine what the circuit does, then implement it.
这是一个顺序电路。读取模拟波形以确定电路的功能,然后实施它。
主要是对信号的解读
首先看p输出
clock为0的时候,p输出q的信号
clock为1的时候,p输出a的信号
其次看q输出
当clock出现下降沿的时候,
q的电平信号变为此时a的电平信号
module top_module (
input clock,
input a,
output p,
output reg q = 0 );always@(negedge clock) begin
q <= a;
end
assign p = (clock == 1) ? a : q;endmodule