linux开发 | tftp下载内核及nfs挂载根文件系统启动log

最新推荐文章于 2022-08-20 19:44:58 发布

透明水晶

最新推荐文章于 2022-08-20 19:44:58 发布

阅读量648

点赞数

分类专栏： 6.Linux驱动及内核开发

本文链接：https://blog.csdn.net/I_feige/article/details/119559520

版权

6.Linux驱动及内核开发专栏收录该内容

20 篇文章 2 订阅

订阅专栏

tftp下载内核及nfs挂载根文件系统启动log

U-Boot 1.3.4 (Aug  5 2021 - 08:18:54) for x210@Flyer


CPU:  S5PV210@1000MHz(OK)
        APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
        MPLL = 667MHz, EPLL = 96MHz
                       HclkDsys = 166MHz, PclkDsys = 83MHz
                       HclkPsys = 133MHz, PclkPsys = 66MHz
                       SCLKA2M  = 200MHz
Serial = CLKUART
Board:   X210BV3S
DRAM:    512 MB
Flash:   8 MB
SD/MMC:  3728MB
In:      serial
Out:     serial
Err:     serial
[LEFT UP] boot mode
checking mode for fastboot ...
Hit any key to stop autoboot:  0
dm9000 i/o: 0x88000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 00:40:5c:26:0a:5b
operating at 100M full duplex mode
TFTP from server 192.168.1.104; our IP address is 192.168.1.188
Filename 'zImage'.
Load address: 0x30008000
Loading: T T T T T T T T T ######################transmission timeout
#######OK

U-Boot 1.3.4 (Aug  5 2021 - 08:18:54) for x210@Flyer


CPU:  S5PV210@1000MHz(OK)
        APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
        MPLL = 667MHz, EPLL = 96MHz
                       HclkDsys = 166MHz, PclkDsys = 83MHz
                       HclkPsys = 133MHz, PclkPsys = 66MHz
                       SCLKA2M  = 200MHz
Serial = CLKUART
Board:   X210BV3S
DRAM:    512 MB
Flash:   8 MB
SD/MMC:  3728MB
In:      serial
Out:     serial
Err:     serial
[LEFT UP] boot mode
checking mode for fastboot ...
Hit any key to stop autoboot:  0
dm9000 i/o: 0x88000300, id: 0x90000a46
DM9000: running in 16 bit mode
MAC: 00:40:5c:26:0a:5b
operating at 100M full duplex mode
TFTP from server 192.168.1.104; our IP address is 192.168.1.188
Filename 'zImage'.
Load address: 0x30008000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ############################T #####################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##
done
Bytes transferred = 3669940 (0x37ffb4)
Boot with zImage

Starting kernel ...



Hello, world 0.@Flyer

Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.7+ (fly@fly-vm) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #1 PREEMPT Tue Aug 10 00:00:34 CST 2021
[    0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: SMDKV210
[    0.000000] @@@@@@@ atags_pointer not null
[    0.000000] @@@@@@@linter#####boot_params:c0000100,mdesc->boot_params:40000002
[    0.000000] Ignoring unrecognised tag 0x41001099
[    0.000000] $$$$$$$$$cmdline:init=/linuxrc  console=ttySAC2,115200  root=nfs  nfsroot=192.168.1.104:/opt/v210_rootfs  ip=192.168.1.188
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] S5PV210: PLL settings, A=1000000000, M=667000000, E=96000000 V=54000000
[    0.000000] S5PV210: ARMCLK=1000000000, HCLKM=200000000, HCLKD=166750000
[    0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
[    0.000000] sclk_dmc: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_onenand: source is hclk_psys (0), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk_mixer: source is sclk_dac (0), rate is 24000000
[    0.000000] sclk_spdif: source is sclk_audio (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam0: source is xusbxti (1), rate is 12000000
[    0.000000] sclk_cam1: source is ext_xtal (0), rate is 12000000
[    0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000
[    0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 96000000
[    0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk_g2d: source is sclk_a2m (0), rate is 200000000
[    0.000000] sclk: source is sclk_a2m (0), rate is 100000000
[    0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mdnie: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x30c0a000
[    0.000000] s5pv210: 37748736 bytes system memory reserved for mfc at 0x40000000
[    0.000000] s5pv210: 25165824 bytes system memory reserved for fimc0 at 0x42400000
[    0.000000] s5pv210: 10137600 bytes system memory reserved for fimc1 at 0x43c00000
[    0.000000] s5pv210: 25165824 bytes system memory reserved for fimc2 at 0x445ab000
[    0.000000] s5pv210: 25165824 bytes system memory reserved for jpeg at 0x45dab000
[    0.000000] s5pv210: 4915200 bytes system memory reserved for fimd at 0x475ab000
[    0.000000] s5pv210: 10485760 bytes system memory reserved for texstream at 0x47a5b000
[    0.000000] s5pv210: 3379200 bytes system memory reserved for pmem_gpu1 at 0x4845b000
[    0.000000] s5pv210: 8388608 bytes system memory reserved for g2d at 0x48794000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: init=/linuxrc  console=ttySAC2,115200  root=nfs  nfsroot=192.168.1.104:/opt/v210_rootfs  ip=192.168.1.188
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 327696k/327696k available, 196592k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xe0800000 - 0xfc000000   ( 440 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0033000   ( 172 kB)
[    0.000000]       .text : 0xc0033000 - 0xc06ef000   (6896 kB)
[    0.000000]       .data : 0xc06f0000 - 0xc073d600   ( 310 kB)
[    0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:393
[    0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[    0.000000] mult[140737]
[    0.000000] max_delta_ns[2937815369]
[    0.000000] min_delta_ns[30517]
[    0.000000] rate[32768]
[    0.000000] HZ[256]
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttySAC2] enabled
[    0.510711] Calibrating delay loop... 998.15 BogoMIPS (lpj=1949696)
[    0.594883] pid_max: default: 32768 minimum: 301
[    0.599532] Mount-cache hash table entries: 512
[    0.604261] Initializing cgroup subsys debug
[    0.608242] Initializing cgroup subsys cpuacct
[    0.612655] Initializing cgroup subsys freezer
[    0.617096] CPU: Testing write buffer coherency: ok
[    0.623879] regulator: core version 0.5
[    0.626374] NET: Registered protocol family 16
[    0.635997] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.640794] pmstats at 00000000
[    0.643918] Open OV2655 camema sensor
[    0.781263] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.787369] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.794904] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.802442] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.809989] smdkv210_nand_io_init
[    0.813651] S5PV210: Initializing architecture
[    0.817988] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[    0.826118] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
[    0.834522] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
[    0.843012] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
[    0.851622] regulator: pd_audio_supply: 5000 mV normal
[    0.856784] regulator: pd_cam_supply: 5000 mV normal
[    0.861796] regulator: pd_tv_supply: 5000 mV normal
[    0.866729] regulator: pd_lcd_supply: 5000 mV normal
[    0.871758] regulator: pd_g3d_supply: 5000 mV normal
[    0.876782] regulator: pd_mfc_supply: 5000 mV normal
[    0.887658] bio: create slab <bio-0> at 0
[    0.890754] SCSI subsystem initialized
[    0.894041] usbcore: registered new interface driver usbfs
[    0.899439] usbcore: registered new interface driver hub
[    0.904758] usbcore: registered new device driver usb
[    0.910088] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.915305] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.920613] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.926114] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.932521] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
[    0.939648] cfg80211: Calling CRDA to update world regulatory domain
[    0.945940] Switching to clocksource clock_source_systimer
[    0.956304] NET: Registered protocol family 2
[    0.959377] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.966798] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.973608] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    0.980350] TCP: Hash tables configured (established 16384 bind 16384)
[    0.986404] TCP reno registered
[    0.989513] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.995435] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    1.001876] NET: Registered protocol family 1
[    1.006307] RPC: Registered udp transport module.
[    1.010757] RPC: Registered tcp transport module.
[    1.015431] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.021992] PMU: registered new PMU device of type 0
[    1.026821] wifi power management
[    1.030309] SMDKC110/V210 RTC, (c) 2010 Samsung Electronics
[    1.035749] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[    1.041697] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[    1.047805] smdkc110-rtc smdkc110-rtc: rtc core: registered s3c as rtc0
[    1.054305] S5PV210 ADC driver, (c) 2010 Samsung Electronics
[    1.060090] cpuidle: phy_regs_save:0x4fd7c000
[    1.064530] input: s3c-button as /devices/virtual/input/input0
[    1.070039] s3c button Initialized!!
[    1.073702] Loaded driver for PL330 DMAC-0 s3c-pl330
[    1.078530]  DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[    1.084657] Loaded driver for PL330 DMAC-1 s3c-pl330
[    1.089528]  DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.095671] Loaded driver for PL330 DMAC-2 s3c-pl330
[    1.100539]  DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.113362] ashmem: initialized
[    1.115634] NTFS driver 2.1.29 [Flags: R/W].
[    1.119317] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.126323] ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.130516] msgmni has been set to 640
[    1.136736] alg: No test for stdrng (krng)
[    1.139419] io scheduler noop registered
[    1.143285] io scheduler deadline registered
[    1.147519] io scheduler cfq registered (default)
[    1.152835] s3cfb s3cfb: [fb2] dma: 0x475ab000, cpu: 0xe1000000, size: 0x004b0000
[    1.163641] FIMD src sclk = 166750000
[    1.165848] s3cfb s3cfb: registered successfully
[    1.170441] Start display and show logo
[    1.274984] x210 led driver
[    1.343000] PA FB = 0x475AB000, bits per pixel = 32
[    1.346432] screen width=1024 height=600 va=0xd75ab000 pa=0x475ab000
[    1.352744] xres_virtual = 1024, yres_virtual = 1200, xoffset = 0, yoffset = 0
[    1.359936] fb_size=4915200
[    1.362704] Back frameBuffer[0].VAddr=d7803000 PAddr=47803000 size=2457600
[    1.369878] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[    1.378011] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[    1.386081] s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[    1.394203] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[    1.406514] brd: module loaded
[    1.410323] loop: module loaded
[    1.412032] pmem_gpu1: 1 init
[    1.415355] Android kernel panic handler initialized (bind=kpanic)
[    1.421564] S3C NAND Driver, (c) 2008 Samsung Electronics
[    1.426577] Unknown NAND Device.
[    1.429743] PPP generic driver version 2.4.2
[    1.434115] PPP Deflate Compression module registered
[    1.438951] PPP BSD Compression module registered
[    1.444352] PPP MPPE Compression module registered
[    1.448396] NET: Registered protocol family 24
[    1.454342] dm9000 Ethernet Driver, V1.31
[    1.458155] eth0: dm9000c at e08f4300,e08f8304 IRQ 42 MAC: 00:09:c0:ff:ec:48 (platform data)
[    1.465366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.471923] s5p-ehci s5p-ehci: s5pv210 EHCI
[    1.475969] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    1.483057] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[    1.498193] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    1.502193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.508890] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.516079] usb usb1: Product: s5pv210 EHCI
[    1.520232] usb usb1: Manufacturer: Linux 2.6.35.7+ ehci_hcd
[    1.525873] usb usb1: SerialNumber: s5pv210
[    1.530467] hub 1-0:1.0: USB hub found
[    1.533778] hub 1-0:1.0: 1 port detected
[    1.537836] Initializing USB Mass Storage driver...
[    1.542604] usbcore: registered new interface driver usb-storage
[    1.548488] USB Mass Storage support registered.
[    1.553334] mice: PS/2 mouse device common for all mice
[    1.558597] S5P Touchscreen driver, (c) 2008 Samsung Electronics
[    1.564358] s3c-ts s3c-ts: Created Median filter len:5 coords:2 dec_threshold:6
[    1.571547] s3c-ts s3c-ts: Created Mean filter len:3 coords:2
[    1.577293] s3c-ts s3c-ts: Created Linear filter coords:2
[    1.582641] s3c-ts s3c-ts: Created zoom filter coords:2
[    1.587835] s3c-ts s3c-ts: 4 filter(s) initialized
[    1.592624] S5P TouchScreen got loaded successfully : 12 bits
[    1.598473] input: S5P TouchScreen as /devices/virtual/input/input1
[    1.604909] [GSLX680] Enter gslX680_ts_init
[    1.608946] input: gslX680 as /devices/platform/s3c2440-i2c.1/i2c-1/1-0040/input/input2
[    1.877086] usb 1-1: new high speed USB device using s5p-ehci and address 2
[    2.011526] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.016766] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.023869] usb 1-1: Product: USB2.0 Hub
[    2.028381] hub 1-1:1.0: USB hub found
[    2.031777] hub 1-1:1.0: 4 ports detected
[    4.249416] using rtc device, s3c, for alarms
[    4.252296] i2c /dev entries driver
[    4.256235] Linux video capture interface: v2.00
[    4.260434] gspca: main v2.9.0 registered
[    4.264491] s3c-csis: Samsung MIPI-CSI2 driver probed successfully
[    4.270555] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[    4.270561]
[    4.279137] S3C JPEG Driver, (c) 2007 Samsung Electronics
[    4.284120] JPEG driver for S5PV210
[    4.288191] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[    4.294029] S5PC11X HPD Driver, (c) 2009 Samsung Electronics
[    4.299818] S5PC11X CEC Driver, (c) 2009 Samsung Electronics
[    4.305753] usbcore: registered new interface driver uvcvideo
[    4.310982] USB Video Class driver (v0.1.0)
[    4.317100] device-mapper: uevent: version 1.0.3
[    4.323032] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    4.330096] cpuidle: using governor ladder
[    4.334163] cpuidle: using governor menu
[    4.338018] sdhci: Secure Digital Host Controller Interface driver
[    4.344137] sdhci: Copyright(c) Pierre Ossman
[    4.348696] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[    4.355063] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
[    4.361647] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[    4.368558] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[    4.375471] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[    4.382011] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
[    4.388591] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[    4.465829] wifi power enabled
[    4.467507] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[    4.474483] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[    4.481033] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
[    4.487619] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
[    4.494485] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[    4.501425] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[    4.507982] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
[    4.514572] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
[    4.521439] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[    4.528970] usbcore: registered new interface driver hiddev
[    4.533977] usbcore: registered new interface driver usbhid
[    4.539422] usbhid: USB HID core driver
[    4.544842] logger: created 64K log 'log_main'
[    4.547949] logger: created 256K log 'log_events'
[    4.552630] logger: created 64K log 'log_radio'
[    4.557133] logger: created 64K log 'log_system'
[    4.562809] No device for DAI WM8976 HiFi
[    4.565631] s3c64xx_iis_dai_init:s3c64xx-i2s0
[    4.570135] s3c64xx_iis_dev_probe:id0 !!!
[    4.574023] s3c64xx_iis_dai_init:s3c64xx-i2s1
[    4.578669] WM8976 Audio Codec 0.4wm8976_probe: i2c_master_send
[    4.584444] wm8976_init
[    4.625765] mmc0: new high speed MMC card at address 0001
[    4.629918] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[    4.634414]  mmcblk0: p1 p2 p3 p4
[    5.299290] mmc2: new high speed SDHC card at address aaaa
[    5.303493] mmcblk1: mmc2:aaaa SS08G 7.40 GiB
[    5.307908]  mmcblk1: p1
[    5.359276] s3c_idma_preallocate_buffer:  VA-e0940000  PA-C0000000  163840bytes
[    5.365394] s3c_preallocate_dma_buffer: VA-ff007000, PA-4FF40000, 131072bytes
[    5.372225] asoc: WM8976 HiFi <-> s3c64xx-i2s0 mapping ok
[    5.380915] ALSA device list:
[    5.382428]   #0: smdkc1000 (WM8976)
[    5.386003] GACT probability NOT on
[    5.389442] Mirror/redirect action on
[    5.393084] u32 classifier
[    5.395746]     Actions configured
[    5.399142] Netfilter messages via NETLINK v0.30.
[    5.403880] nf_conntrack version 0.5.0 (5120 buckets, 20480 max)
[    5.409954] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    5.417178] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    5.425186] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    5.431853] ctnetlink v0.93: registering with nfnetlink.
[    5.436603] xt_time: kernel timezone is -0000
[    5.442902] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.446840] arp_tables: (C) 2002 David S. Miller
[    5.451405] TCP cubic registered
[    5.454558] NET: Registered protocol family 10
[    5.460771] lo: Disabled Privacy Extensions
[    5.468150] Mobile IPv6
[    5.469111] IPv6 over IPv4 tunneling driver
[    5.474847] sit0: Disabled Privacy Extensions
[    5.480540] ip6tnl0: Disabled Privacy Extensions
[    5.485035] NET: Registered protocol family 17
[    5.488129] NET: Registered protocol family 15
[    5.492564] lib80211: common routines for IEEE802.11 drivers
[    5.498233] ThumbEE CPU extension supported.
[    5.502510] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[    5.510584] regulator_init_complete: disabling pd_mfc_supply
[    5.515678] regulator_init_complete: disabling pd_tv_supply
[    5.521215] regulator_init_complete: disabling pd_cam_supply
[    5.527010] smdkc110-rtc smdkc110-rtc: rtc disabled, re-enabling
[    5.532835] smdkc110-rtc smdkc110-rtc: setting system clock to 2010-01-01 12:00:05 UTC (1262347205)
[    5.543313] FIMC0 registered successfully
[    5.547135] FIMC1 registered successfully
[    5.551107] FIMC2 registered successfully
[    5.553884] <6>S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[    5.560565] s5p-tvout s5p-tvout: hpd status is cable removed
[    6.111595] eth0: link down
[    6.113061] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.119272] Sending DHCP requests .
[   10.048965] eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[   10.053343] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.166141] ..
[   22.013778] ... timed out!
[   85.174363] IP-Config: Retrying forever (NFS root)...
[   85.720791] eth0: link down
[   85.722237] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   86.728633] Sending DHCP requests .
[   87.330178] eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[   87.334555] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   87.732501] , OK
[   87.736429] IP-Config: Got DHCP answer from 0.0.0.0, my address is 192.168.1.102
[   87.743528] IP-Config: Complete:
[   87.745794]      device=eth0, addr=192.168.1.102, mask=255.255.255.0, gw=192.168.1.253,
[   87.753659]      host=192.168.1.102, domain=, nis-domain=(none),
[   87.759651]      bootserver=0.0.0.0, rootserver=192.168.1.104, rootpath=
[   87.766699] DBUG_PORT must not use AFC!
[   87.770463] Looking up port of RPC 100003/2 on 192.168.1.104


[   87.785816] Looking up port of RPC 100005/1 on 192.168.1.104
[   87.807162] VFS: Mounted root (nfs filesystem) on device 0:12.
[   87.811567] Freeing init memory: 172K
can't run '/etc/init.d/rcS': No such file or directory
can't open /dev/tty2: No such file or directory
can't open /dev/tty3: No such file or directory
can't open /dev/tty4: No such file or directory

Please press Enter to activate this console. / #
can't open /dev/tty2: No such file or directory
can't open /dev/tty4: No such file or directory
can't open /dev/tty3: No such file or directory
can't open /dev/tty2: No such file or directory
can't open /dev/tty4: No such file or directory
can't open /dev/tty3: No such file or directory
can't open /dev/tty2: No such file or directory
can't open /dev/tty4: No such file or directory
can't open /dev/tty3: No such file or directory
can't open /dev/tty2: No such file or directory
can't open /dev/tty4: No such file or directory
can't open /dev/tty3: No such file or directory
can't open /dev/tty2: No such file or directory

can't open /dev/tty4: No such file or directory
can't open /dev/tty3: No such file or directory

can't open /dev/tty2: No such file or directory

/ #
can't open /dev/tty4: No such file or directory
can't open /dev/tty3: No such file or directory

/ #
can't open /dev/tty2: No such file or directory

由于是直接挂载了busybox编译的文件系统，还有很多配置文件没有添加，所以虽然能挂载成功但是很多功能没有，而且还有报错的信息。这个我们下一阶段继续完善及优化。

根文件系统信息

fly@fly-vm:~$ cd /opt/v210_rootfs/
fly@fly-vm:v210_rootfs$ tree
.
├── bin
│   ├── arch -> busybox
│   ├── ash -> busybox
│   ├── base32 -> busybox
│   ├── base64 -> busybox
│   ├── busybox
│   ├── cat -> busybox
│   ├── chattr -> busybox
│   ├── chgrp -> busybox
│   ├── chmod -> busybox
│   ├── chown -> busybox
│   ├── conspy -> busybox
│   ├── cp -> busybox
│   ├── cpio -> busybox
│   ├── cttyhack -> busybox
│   ├── date -> busybox
│   ├── dd -> busybox
│   ├── df -> busybox
│   ├── dmesg -> busybox
│   ├── dnsdomainname -> busybox
│   ├── dumpkmap -> busybox
│   ├── echo -> busybox
│   ├── ed -> busybox
│   ├── egrep -> busybox
│   ├── false -> busybox
│   ├── fatattr -> busybox
│   ├── fdflush -> busybox
│   ├── fgrep -> busybox
│   ├── fsync -> busybox
│   ├── getopt -> busybox
│   ├── grep -> busybox
│   ├── gunzip -> busybox
│   ├── gzip -> busybox
│   ├── hostname -> busybox
│   ├── hush -> busybox
│   ├── ionice -> busybox
│   ├── iostat -> busybox
│   ├── ipcalc -> busybox
│   ├── kbd_mode -> busybox
│   ├── kill -> busybox
│   ├── link -> busybox
│   ├── linux32 -> busybox
│   ├── linux64 -> busybox
│   ├── ln -> busybox
│   ├── login -> busybox
│   ├── ls -> busybox
│   ├── lsattr -> busybox
│   ├── lzop -> busybox
│   ├── makemime -> busybox
│   ├── mkdir -> busybox
│   ├── mknod -> busybox
│   ├── mktemp -> busybox
│   ├── more -> busybox
│   ├── mount -> busybox
│   ├── mountpoint -> busybox
│   ├── mpstat -> busybox
│   ├── mt -> busybox
│   ├── mv -> busybox
│   ├── netstat -> busybox
│   ├── nice -> busybox
│   ├── nuke -> busybox
│   ├── pidof -> busybox
│   ├── ping -> busybox
│   ├── ping6 -> busybox
│   ├── pipe_progress -> busybox
│   ├── printenv -> busybox
│   ├── ps -> busybox
│   ├── pwd -> busybox
│   ├── reformime -> busybox
│   ├── resume -> busybox
│   ├── rev -> busybox
│   ├── rm -> busybox
│   ├── rmdir -> busybox
│   ├── rpm -> busybox
│   ├── run-parts -> busybox
│   ├── scriptreplay -> busybox
│   ├── sed -> busybox
│   ├── setarch -> busybox
│   ├── setpriv -> busybox
│   ├── setserial -> busybox
│   ├── sh -> busybox
│   ├── sleep -> busybox
│   ├── stat -> busybox
│   ├── stty -> busybox
│   ├── su -> busybox
│   ├── tar -> busybox
│   ├── touch -> busybox
│   ├── true -> busybox
│   ├── umount -> busybox
│   ├── uname -> busybox
│   ├── usleep -> busybox
│   ├── vi -> busybox
│   ├── watch -> busybox
│   └── zcat -> busybox
├── linuxrc -> bin/busybox
├── sbin
│   ├── acpid -> ../bin/busybox
│   ├── adjtimex -> ../bin/busybox
│   ├── arp -> ../bin/busybox
│   ├── blkid -> ../bin/busybox
│   ├── blockdev -> ../bin/busybox
│   ├── bootchartd -> ../bin/busybox
│   ├── depmod -> ../bin/busybox
│   ├── devmem -> ../bin/busybox
│   ├── fbsplash -> ../bin/busybox
│   ├── fdisk -> ../bin/busybox
│   ├── findfs -> ../bin/busybox
│   ├── freeramdisk -> ../bin/busybox
│   ├── fsck -> ../bin/busybox
│   ├── fsck.minix -> ../bin/busybox
│   ├── fstrim -> ../bin/busybox
│   ├── getty -> ../bin/busybox
│   ├── halt -> ../bin/busybox
│   ├── hdparm -> ../bin/busybox
│   ├── hwclock -> ../bin/busybox
│   ├── ifconfig -> ../bin/busybox
│   ├── ifdown -> ../bin/busybox
│   ├── ifenslave -> ../bin/busybox
│   ├── ifup -> ../bin/busybox
│   ├── init -> ../bin/busybox
│   ├── insmod -> ../bin/busybox
│   ├── ip -> ../bin/busybox
│   ├── ipaddr -> ../bin/busybox
│   ├── iplink -> ../bin/busybox
│   ├── ipneigh -> ../bin/busybox
│   ├── iproute -> ../bin/busybox
│   ├── iprule -> ../bin/busybox
│   ├── iptunnel -> ../bin/busybox
│   ├── klogd -> ../bin/busybox
│   ├── loadkmap -> ../bin/busybox
│   ├── logread -> ../bin/busybox
│   ├── losetup -> ../bin/busybox
│   ├── lsmod -> ../bin/busybox
│   ├── makedevs -> ../bin/busybox
│   ├── mdev -> ../bin/busybox
│   ├── mkdosfs -> ../bin/busybox
│   ├── mke2fs -> ../bin/busybox
│   ├── mkfs.ext2 -> ../bin/busybox
│   ├── mkfs.minix -> ../bin/busybox
│   ├── mkfs.vfat -> ../bin/busybox
│   ├── mkswap -> ../bin/busybox
│   ├── modinfo -> ../bin/busybox
│   ├── modprobe -> ../bin/busybox
│   ├── nameif -> ../bin/busybox
│   ├── pivot_root -> ../bin/busybox
│   ├── poweroff -> ../bin/busybox
│   ├── raidautorun -> ../bin/busybox
│   ├── reboot -> ../bin/busybox
│   ├── rmmod -> ../bin/busybox
│   ├── route -> ../bin/busybox
│   ├── run-init -> ../bin/busybox
│   ├── runlevel -> ../bin/busybox
│   ├── setconsole -> ../bin/busybox
│   ├── slattach -> ../bin/busybox
│   ├── start-stop-daemon -> ../bin/busybox
│   ├── sulogin -> ../bin/busybox
│   ├── swapoff -> ../bin/busybox
│   ├── swapon -> ../bin/busybox
│   ├── switch_root -> ../bin/busybox
│   ├── sysctl -> ../bin/busybox
│   ├── syslogd -> ../bin/busybox
│   ├── tc -> ../bin/busybox
│   ├── tunctl -> ../bin/busybox
│   ├── udhcpc -> ../bin/busybox
│   ├── uevent -> ../bin/busybox
│   ├── vconfig -> ../bin/busybox
│   ├── watchdog -> ../bin/busybox
│   └── zcip -> ../bin/busybox
└── usr
    ├── bin
    │   ├── [ -> ../../bin/busybox
    │   ├── [[ -> ../../bin/busybox
    │   ├── awk -> ../../bin/busybox
    │   ├── basename -> ../../bin/busybox
    │   ├── bc -> ../../bin/busybox
    │   ├── beep -> ../../bin/busybox
    │   ├── blkdiscard -> ../../bin/busybox
    │   ├── bunzip2 -> ../../bin/busybox
    │   ├── bzcat -> ../../bin/busybox
    │   ├── bzip2 -> ../../bin/busybox
    │   ├── cal -> ../../bin/busybox
    │   ├── chpst -> ../../bin/busybox
    │   ├── chrt -> ../../bin/busybox
    │   ├── chvt -> ../../bin/busybox
    │   ├── cksum -> ../../bin/busybox
    │   ├── clear -> ../../bin/busybox
    │   ├── cmp -> ../../bin/busybox
    │   ├── comm -> ../../bin/busybox
    │   ├── crontab -> ../../bin/busybox
    │   ├── cryptpw -> ../../bin/busybox
    │   ├── cut -> ../../bin/busybox
    │   ├── dc -> ../../bin/busybox
    │   ├── deallocvt -> ../../bin/busybox
    │   ├── diff -> ../../bin/busybox
    │   ├── dirname -> ../../bin/busybox
    │   ├── dos2unix -> ../../bin/busybox
    │   ├── dpkg -> ../../bin/busybox
    │   ├── dpkg-deb -> ../../bin/busybox
    │   ├── du -> ../../bin/busybox
    │   ├── dumpleases -> ../../bin/busybox
    │   ├── eject -> ../../bin/busybox
    │   ├── env -> ../../bin/busybox
    │   ├── envdir -> ../../bin/busybox
    │   ├── envuidgid -> ../../bin/busybox
    │   ├── expand -> ../../bin/busybox
    │   ├── expr -> ../../bin/busybox
    │   ├── factor -> ../../bin/busybox
    │   ├── fallocate -> ../../bin/busybox
    │   ├── fgconsole -> ../../bin/busybox
    │   ├── find -> ../../bin/busybox
    │   ├── flock -> ../../bin/busybox
    │   ├── fold -> ../../bin/busybox
    │   ├── free -> ../../bin/busybox
    │   ├── ftpget -> ../../bin/busybox
    │   ├── ftpput -> ../../bin/busybox
    │   ├── fuser -> ../../bin/busybox
    │   ├── groups -> ../../bin/busybox
    │   ├── hd -> ../../bin/busybox
    │   ├── head -> ../../bin/busybox
    │   ├── hexdump -> ../../bin/busybox
    │   ├── hexedit -> ../../bin/busybox
    │   ├── hostid -> ../../bin/busybox
    │   ├── id -> ../../bin/busybox
    │   ├── install -> ../../bin/busybox
    │   ├── ipcrm -> ../../bin/busybox
    │   ├── ipcs -> ../../bin/busybox
    │   ├── killall -> ../../bin/busybox
    │   ├── last -> ../../bin/busybox
    │   ├── less -> ../../bin/busybox
    │   ├── logger -> ../../bin/busybox
    │   ├── logname -> ../../bin/busybox
    │   ├── lpq -> ../../bin/busybox
    │   ├── lpr -> ../../bin/busybox
    │   ├── lsof -> ../../bin/busybox
    │   ├── lspci -> ../../bin/busybox
    │   ├── lsscsi -> ../../bin/busybox
    │   ├── lsusb -> ../../bin/busybox
    │   ├── lzcat -> ../../bin/busybox
    │   ├── lzma -> ../../bin/busybox
    │   ├── man -> ../../bin/busybox
    │   ├── md5sum -> ../../bin/busybox
    │   ├── mesg -> ../../bin/busybox
    │   ├── microcom -> ../../bin/busybox
    │   ├── mkfifo -> ../../bin/busybox
    │   ├── mkpasswd -> ../../bin/busybox
    │   ├── nc -> ../../bin/busybox
    │   ├── nl -> ../../bin/busybox
    │   ├── nmeter -> ../../bin/busybox
    │   ├── nohup -> ../../bin/busybox
    │   ├── nproc -> ../../bin/busybox
    │   ├── nslookup -> ../../bin/busybox
    │   ├── od -> ../../bin/busybox
    │   ├── openvt -> ../../bin/busybox
    │   ├── passwd -> ../../bin/busybox
    │   ├── paste -> ../../bin/busybox
    │   ├── patch -> ../../bin/busybox
    │   ├── pgrep -> ../../bin/busybox
    │   ├── pkill -> ../../bin/busybox
    │   ├── pmap -> ../../bin/busybox
    │   ├── printf -> ../../bin/busybox
    │   ├── pscan -> ../../bin/busybox
    │   ├── pstree -> ../../bin/busybox
    │   ├── pwdx -> ../../bin/busybox
    │   ├── readlink -> ../../bin/busybox
    │   ├── realpath -> ../../bin/busybox
    │   ├── renice -> ../../bin/busybox
    │   ├── reset -> ../../bin/busybox
    │   ├── resize -> ../../bin/busybox
    │   ├── rpm2cpio -> ../../bin/busybox
    │   ├── runsv -> ../../bin/busybox
    │   ├── runsvdir -> ../../bin/busybox
    │   ├── rx -> ../../bin/busybox
    │   ├── script -> ../../bin/busybox
    │   ├── seq -> ../../bin/busybox
    │   ├── setfattr -> ../../bin/busybox
    │   ├── setkeycodes -> ../../bin/busybox
    │   ├── setsid -> ../../bin/busybox
    │   ├── setuidgid -> ../../bin/busybox
    │   ├── sha1sum -> ../../bin/busybox
    │   ├── sha256sum -> ../../bin/busybox
    │   ├── sha3sum -> ../../bin/busybox
    │   ├── sha512sum -> ../../bin/busybox
    │   ├── showkey -> ../../bin/busybox
    │   ├── shred -> ../../bin/busybox
    │   ├── shuf -> ../../bin/busybox
    │   ├── smemcap -> ../../bin/busybox
    │   ├── softlimit -> ../../bin/busybox
    │   ├── sort -> ../../bin/busybox
    │   ├── split -> ../../bin/busybox
    │   ├── ssl_client -> ../../bin/busybox
    │   ├── strings -> ../../bin/busybox
    │   ├── sum -> ../../bin/busybox
    │   ├── sv -> ../../bin/busybox
    │   ├── svc -> ../../bin/busybox
    │   ├── svok -> ../../bin/busybox
    │   ├── tac -> ../../bin/busybox
    │   ├── tail -> ../../bin/busybox
    │   ├── taskset -> ../../bin/busybox
    │   ├── tcpsvd -> ../../bin/busybox
    │   ├── tee -> ../../bin/busybox
    │   ├── telnet -> ../../bin/busybox
    │   ├── test -> ../../bin/busybox
    │   ├── tftp -> ../../bin/busybox
    │   ├── time -> ../../bin/busybox
    │   ├── timeout -> ../../bin/busybox
    │   ├── top -> ../../bin/busybox
    │   ├── tr -> ../../bin/busybox
    │   ├── traceroute -> ../../bin/busybox
    │   ├── traceroute6 -> ../../bin/busybox
    │   ├── truncate -> ../../bin/busybox
    │   ├── ts -> ../../bin/busybox
    │   ├── tty -> ../../bin/busybox
    │   ├── ttysize -> ../../bin/busybox
    │   ├── udhcpc6 -> ../../bin/busybox
    │   ├── udpsvd -> ../../bin/busybox
    │   ├── unexpand -> ../../bin/busybox
    │   ├── uniq -> ../../bin/busybox
    │   ├── unix2dos -> ../../bin/busybox
    │   ├── unlink -> ../../bin/busybox
    │   ├── unlzma -> ../../bin/busybox
    │   ├── unshare -> ../../bin/busybox
    │   ├── unxz -> ../../bin/busybox
    │   ├── unzip -> ../../bin/busybox
    │   ├── uptime -> ../../bin/busybox
    │   ├── users -> ../../bin/busybox
    │   ├── uudecode -> ../../bin/busybox
    │   ├── uuencode -> ../../bin/busybox
    │   ├── vlock -> ../../bin/busybox
    │   ├── volname -> ../../bin/busybox
    │   ├── w -> ../../bin/busybox
    │   ├── wall -> ../../bin/busybox
    │   ├── wc -> ../../bin/busybox
    │   ├── wget -> ../../bin/busybox
    │   ├── which -> ../../bin/busybox
    │   ├── who -> ../../bin/busybox
    │   ├── whoami -> ../../bin/busybox
    │   ├── whois -> ../../bin/busybox
    │   ├── xargs -> ../../bin/busybox
    │   ├── xxd -> ../../bin/busybox
    │   ├── xz -> ../../bin/busybox
    │   ├── xzcat -> ../../bin/busybox
    │   └── yes -> ../../bin/busybox
    └── sbin
        ├── addgroup -> ../../bin/busybox
        ├── add-shell -> ../../bin/busybox
        ├── adduser -> ../../bin/busybox
        ├── arping -> ../../bin/busybox
        ├── brctl -> ../../bin/busybox
        ├── chat -> ../../bin/busybox
        ├── chpasswd -> ../../bin/busybox
        ├── chroot -> ../../bin/busybox
        ├── crond -> ../../bin/busybox
        ├── delgroup -> ../../bin/busybox
        ├── deluser -> ../../bin/busybox
        ├── dhcprelay -> ../../bin/busybox
        ├── dnsd -> ../../bin/busybox
        ├── ether-wake -> ../../bin/busybox
        ├── fakeidentd -> ../../bin/busybox
        ├── fbset -> ../../bin/busybox
        ├── fdformat -> ../../bin/busybox
        ├── fsfreeze -> ../../bin/busybox
        ├── ftpd -> ../../bin/busybox
        ├── httpd -> ../../bin/busybox
        ├── i2cdetect -> ../../bin/busybox
        ├── i2cdump -> ../../bin/busybox
        ├── i2cget -> ../../bin/busybox
        ├── i2cset -> ../../bin/busybox
        ├── i2ctransfer -> ../../bin/busybox
        ├── ifplugd -> ../../bin/busybox
        ├── inetd -> ../../bin/busybox
        ├── killall5 -> ../../bin/busybox
        ├── loadfont -> ../../bin/busybox
        ├── lpd -> ../../bin/busybox
        ├── mim -> ../../bin/busybox
        ├── nanddump -> ../../bin/busybox
        ├── nandwrite -> ../../bin/busybox
        ├── nbd-client -> ../../bin/busybox
        ├── nologin -> ../../bin/busybox
        ├── ntpd -> ../../bin/busybox
        ├── partprobe -> ../../bin/busybox
        ├── popmaildir -> ../../bin/busybox
        ├── powertop -> ../../bin/busybox
        ├── rdate -> ../../bin/busybox
        ├── rdev -> ../../bin/busybox
        ├── readahead -> ../../bin/busybox
        ├── readprofile -> ../../bin/busybox
        ├── remove-shell -> ../../bin/busybox
        ├── rtcwake -> ../../bin/busybox
        ├── sendmail -> ../../bin/busybox
        ├── setfont -> ../../bin/busybox
        ├── setlogcons -> ../../bin/busybox
        ├── svlogd -> ../../bin/busybox
        ├── telnetd -> ../../bin/busybox
        ├── tftpd -> ../../bin/busybox
        ├── ubiattach -> ../../bin/busybox
        ├── ubidetach -> ../../bin/busybox
        ├── ubimkvol -> ../../bin/busybox
        ├── ubirename -> ../../bin/busybox
        ├── ubirmvol -> ../../bin/busybox
        ├── ubirsvol -> ../../bin/busybox
        ├── ubiupdatevol -> ../../bin/busybox
        └── udhcpd -> ../../bin/busybox

5 directories, 397 files
fly@fly-vm:v210_rootfs$ ls
bin  linuxrc  sbin  usr

透明水晶

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
2
评论
linux开发 | tftp下载内核及nfs挂载根文件系统启动log

tftp下载内核及nfs挂载根文件系统启动logU-Boot 1.3.4 (Aug 5 2021 - 08:18:54) for x210@FlyerCPU: S5PV210@1000MHz(OK) APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz MPLL = 667MHz, EPLL = 96MHz HclkDsys = 166MHz, PclkDsys =
复制链接

扫一扫