一、USB Mode
1.ROM版本:
写入CSR86XX_system_usb.psr
通过USB config 配置USB mode(Microphone audio、Speaker audio、Battery charging、Mass storge、Media Keyboard、Consumer Transport control)
PStool→Host interface(USB link)→USB vendor identifier(任意值)
2.Flash版本:
修改以上信息后,修改sink→Properties→USB、USB Audio(Enable)→Transport(USB VM)
VM application will supply USB descripors (True)
问题:
出现不能同时配置多个USB Mode:CSR86XX_system_usb.psr文件的PSKEY_USR28未写入
PSKEY_USR28=0017 8096 1400 0400 905a 805a 8096 8096 8096 8096 01ff
二、Voice prompts
CSR8670 Flash erase all 后需重新merge system.psr、config.psr文件后再Debug
1.加入Voice Event
2.Create voice prompts 到project 的image目录
3.debug