TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file....

最新推荐文章于 2024-09-18 16:25:53 发布
最新推荐文章于 2024-09-18 16:25:53 发布
阅读量586 收藏 1
点赞数
分类专栏： 问题 文章标签： python
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/MelonLee1/article/details/132026605
版权
文章讲述了在遇到TypeError关于Descriptors不能直接创建的问题时，可能是因为protobuf版本过高。解决方案是将protobuf包降至3.20.x或更低版本，可以通过执行‘pipuninstallprotobuf’和‘pipinstallprotobuf==3.20.1’来实现。
摘要由CSDN通过智能技术生成

一、问题

TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your generated code is out of date and must be regenerated with protoc >= 3.19.0. If you cannot immediately regenerate your protos, some other possible workarounds are:
1. Downgrade the protobuf package to 3.20.x or lower.
2. Set PROTOCOL_BUFFERS_PYTHON_IMPLEMENTATION=python (but this will use pure-Python parsing and will be much slower).

二、解决方法

将protobuf包降至3.20.x版本或者更低

pip uninstall protobuf
pip install protobuf==3.20.1

MelonLee1
关注
专栏目录
TypeError: Descriptors cannot not be created directly.（Tensorflow安装问题）
qq_45738555的博客
01-15 3467
tensorflow安装问题，protobuf
TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file……
XavierJ的博客
05-27 2万+
问题描述 TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your generated code is out of date and must be regenerated with protoc >= 3.19.0. If you cannot immediately regenerate your protos, some other possible wo
TypeError: Descriptors cannot be created directly.If this call came from a _pb2.py file[已解决]
Vertira的博客
02-25 2567
TypeError: Descriptors cannot be created directly.If this call came from a _pb2.py file, your gener
TypeError: Descriptors cannot be created directly.If this call came from a _pb2.py file...报错解决记录
最新发布
Together_CZ的博客
09-18 632
TypeError: Descriptors cannot be created directly. If this call came from a _pb2.py file, your generated code is out of date and must be regenerated with protoc >= 3.19.0. If you cannot immediately regenerate your protos, some other possible workarounds ar
tensorflow安装报错问题----TypeError: Descriptors cannot not be created directly. If this call came from a
zsysingapore的博客
10-17 1561
二.ERROR: pip’s dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.大概意思就是你的通信协议保必须再3.19.0≤P≤3.20，用以下命令解决。
报错TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your
qq_55736201的博客
02-04 2129
如果此调用来自_pb2.py文件，则生成的代码已过期，必须使用。类型错误:无法直接创建描述符。>=3.1.0重新生成。
问题TypeError: Descriptors cannot not be created directly.If this call came from a _pb2.py file
Liang_xj的博客
10-11 3654
这是因为默认下载的protobuf版本太高，且其不具备兼容性，需要将protobuf版本降低到3.20.x以下
TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your g
unique_zhao的博客
12-15 929
之前代码用的好好的，然后安装了TensorRT及一系列其他包之后，原来的代码在import过程就报以下错误。报该错误时，发现这些错误都是出现在mediapipe相关的导入中，跟pb2和protoc有关。
TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your generated code is out of date and must be regenerated with protoc >= 3.19.0.
05-30
这个错误通常是由于Protobuf版本不兼容引起的，您需要使用协议缓冲区3.19.0或更高版本重新生成_pb2.py文件。您可以使用以下命令生成新的_pb2.py文件： ``` protoc --python_out=. your_proto_file.proto ``` 请...
Descriptors cannot not be created directly
叶子的博客
06-11 3万+
Descriptors cannot not be created directly AttributeError: type object 'DialogCode' has no attribute 'Accepted'
解决：TypeError: Descriptors cannot not be created directly
热门推荐
qq_51447436的博客
07-02 7万+
解决：TypeError: Descriptors cannot not be created directly
解决TypeError: Descriptors cannot not be created directly报错！
qq_70110230的博客
04-18 2913
一次解决报错！！ Ifthiscallcamefroma_pb2.pyfile,yourgeneratedcodeisoutofdateandmustberegeneratedwithprotoc>=3.19.0. Ifyoucannotimmediatelyregenerateyourprotos,someotherpossibleworkaround
TypeError: Descriptors cannot not be created directly.
祭酒的博客
05-26 7263
python 依赖 protobuf 奇怪报错 TypeError: Descriptors cannot not be created directly. 在使用 paddlex 时引入一些调用了 proto的三方包时报了如下错误： import paddle.fluid as fluid TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your generate
已解决TypeError: Descriptors cannot not be created directly.
努力让自己发光，对的人才能迎着光而来
12-19 3万+
已解决TypeError: Descriptors cannot not be created directly. If this call came from a _pb2.py file, your generated code is out of date and must be regenerated with protoc >= 3.1.0If you cannot immediately regenerate your protos, some other possible workaround
关于Descriptors cannot not be created directly报错
m0_51474171的博客
06-02 4163
报错信息为：解决方法：打开Anaconda Prompt终端，进入当前使用的pytroch环境 分别执行以下两个命令
TypeError: Descriptors cannot be created directly.报错分析与解决
sangedianhao的博客
03-12 4786
在更新的版本里，builder模块已经被迁移到了google.protobuf包内，不再位于google.protobuf.internal路径下。如果这个调用来自_pb2.py文件，你的生成代码已经过时，必须使用protoc >= 3.19.0重新生成。问题是由于使用了过高版本的protobuf库所导致的。在protobuf的更新版本中，为了提升性能，对Descriptor对象的生成机制进行了调整。在TensorBoard使用结束，想要继续进行模型的训练、评估时，出现上面的问题。
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值