OSPF(Open Shortest Path First)-eNSP

开放式最短路径优先OSPF

Open Shortest Path First

由IETF开发

基于链路状态的内部网关协议

IPv4使用OSPF Version 2（RFC2328）

IPv6使用OSPF Version 3（RFC2740）

题目：基于交换机配置ospf

A

[A]undo info-center enable 	
[A]vlan batch 10 20 30	
[A]interface GigabitEthernet 0/0/1	
[A-GigabitEthernet0/0/1]port link-type trunk 	
[A-GigabitEthernet0/0/1]port trunk allow-pass vlan 10
[A]interface GigabitEthernet 0/0/2
[A-GigabitEthernet0/0/2]port link-type trunk 	
[A-GigabitEthernet0/0/2]port trunk allow-pass vlan 20
[A]interface Vlanif 10
[A-Vlanif10]ip address 192.168.1.1 24	
[A]interface Vlanif 20
[A-Vlanif20]ip address 192.168.2.1 24	
[A]ospf 1 router-id 1.1.1.1	
[A-ospf-1]area 1
[A-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.255
[A-ospf-1]area 2
[A-ospf-1-area-0.0.0.2]network 192.168.2.0 0.0.0.255

B

[B]undo info-center enable 	
[B]vlan batch 10 20 30	
[B]interface GigabitEthernet 0/0/1
[B-GigabitEthernet0/0/1]port link-type trunk 	
[B-GigabitEthernet0/0/1]port trunk allow-pass vlan 10
[B]interface Ethernet0/0/1
[B-Ethernet0/0/1]port link-type trunk 	
[B-Ethernet0/0/1]port trunk allow-pass vlan 30	
[B]interface Vlanif 10	
[B-Vlanif10]ip address 192.168.1.2 24
[B]interface Vlanif 30
[B-Vlanif30]ip address 192.168.3.1 24
[B-ospf-1]area 2
[B]ospf 1 router-id 2.2.2.2
[B-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.255
[B-ospf-1]area 3
[B-ospf-1-area-0.0.0.3]network 192.168.3.0 0.0.0.255

C

[C]undo info-center enable
[C]vlan batch 10 20 30	
[C]interface GigabitEthernet 0/0/2
[C-GigabitEthernet0/0/2]port link-type trunk 
[C-GigabitEthernet0/0/2]port trunk allow-pass vlan 20
[C]interface Ethernet0/0/1
[C-Ethernet0/0/1]port link-type trunk 
[C-Ethernet0/0/1]port trunk allow-pass  vlan 30
[C]interface Vlanif 20
[C-Vlanif20]ip address 192.168.2.2 24
[C]interface Vlanif 30
[C-Vlanif30]ip address 192.168.3.2 24
[C]ospf 1 router-id 3.3.3.3
[C-ospf-1]area 2
[C-ospf-1-area-0.0.0.2]network 192.168.2.0 0.0.0.255
[C-ospf-1]area 3
[C-ospf-1-area-0.0.0.3]network 192.168.3.0 0.0.0.255