HCIP—vlan实验作业

1.PC1和PC3所在接口为acces5；属于v1an2。PC2/4/5/6处于同一网段，其中PC2可以访问PC4/5/6,但PC4可以访问PC5,不能访问PC6
2.PC5不能访问PC6
3.PC1/3与PC2/4/5/6不在同一个网段
4.所有PC通过DHCP获取IP地址，且PC1/3可以正常访问PC2/4/5/6

LSW1

[sw1]vlan batch 2 to 6-----创建2到6vlan

[sw1]int g0/0/1

[sw1-GigabitEthernet0/0/1]port link-type access----创建接口类型access

[sw1-GigabitEthernet0/0/1]port default  vlan 2

[sw1]int g0/0/2

[sw1-GigabitEthernet0/0/2]port link-type hybrid-----创建混杂接口

[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3-----改变pvid 为vlan3

[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 2 to 6-----放空2~6vlan

[sw1]int g0/0/3

[sw1-GigabitEthernet0/0/3]port link-type trunk-----创建接口类型为trunk

[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6----放空2~6vlan

[sw1]interface GigabitEthernet0/0/4

[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2

[sw1-GigabitEthernet0/0/4]port hybrid untagged vlan 3 to 6

[sw1]int g0/0/4

[sw1-GigabitEthernet0/0/4]port link-type hybrid-----创建混杂接口

[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2

[sw1-GigabitEthernet0/0/4]port hybrid untagged vlan  3 4 5 6

[sw1-GigabitEthernet0/0/4]port hybrid pvid vlan 2

LSW2

[sw2]vlan batch 2 to 6-----创建2到6vlan

[sw2]int g0/0/1

[sw2-GigabitEthernet0/0/1]port link-type access----创建接口类型access

[sw2-GigabitEthernet0/0/1]port default vlan 2

[sw2]int g0/0/2

[sw2-GigabitEthernet0/0/2]port link-type hybrid-----创建混杂接口

[sw2-GigabitEthernet0/0/2]port hybrid pvid vlan 4-----改变pvid 为vlan4

[sw2-GigabitEthernet0/0/2]port hybrid untagged vlan 2 3 4 5----放空2，3，4，5vlan

[sw2]int g0/0/3

[sw2-GigabitEthernet0/0/3]port link-type trunk-----创建接口类型为trunk

[sw2-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6----放空2~6vlan

[sw2]int g0/0/4

[SW2-GigabitEthernet0/0/4]port link-type trunk-----创建接口类型为trunk

[SW2-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 6---放空2~6vlan

LSW3

[sw2]vlan batch 2 to 6-----创建2到6vlan

[sw3]int g0/0/3

[sw3-GigabitEthernet0/0/3]port link-type trunk

[sw3-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6---放空2~6vlan

[sw3]int g0/0/1

[sw3-GigabitEthernet0/0/1]port link-type hybrid-----创建混杂接口

[sw3-GigabitEthernet0/0/1]port hybrid pvid vlan 5-----改变pvid 为vlan5

[sw3-GigabitEthernet0/0/1]port hybrid untagged vlan 2 3 4 5----放空2，3，4，5vlan

[sw3]int g0/0/2

[sw3-GigabitEthernet0/0/2]port link-type hybrid

[sw3-GigabitEthernet0/0/1]port hybrid pvid vlan 6-----改变pvid 为vlan6

[sw3-GigabitEthernet0/0/1]port hybrid untagged vlan 2 3 6----放空2，3，6vlan

 

R1

[R1]int g0/0/0.1

[R1-GigabitEthernet0/0/0.1]ip address 192.168.1.1 24

[R1-GigabitEthernet0/0/0.1]dot1q termination vid 2

[R1-GigabitEthernet0/0/0.1]arp broadcast enable 

[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.2.1 24

[R1]dhcp enable   ---启动DHCP服务

[R1]ip pool a

[R1-ip-pool-a]network  192.168.1.0 mask 24

[R1-ip-pool-a]gateway-list 192.168.1.1

[R1]ip pool b

[R1-ip-pool-b]network  192.168.2.0 mask 24

[R1-ip-pool-a]gateway-list 192.168.2.1

[R1-GigabitEthernet0/0/0]dhcp select global 

[R1-GigabitEthernet0/0/0.1]dhcp select global 

PC1

PC2

PC3

PC4

PC5

PC6

测试：

PC2可以访问PC4/5/6

PC4可以访问PC5，但不能访问PC6

PC5不能访问PC6

PC1和PC3可以正常访问PC2/4/5/6

PC3