基于普中的at89c51单片机的kun点阵代码

 

采用模块化编程，vscode调用keil实现代码运行。

#include <REG52.H>
#include "Delay.h"
#include "MatrixLED.h"

//????
unsigned char code Animation[]={
	0x0C,0xD3,0xFC,0xD2,0x09,0x18,0x18,0x00,
	0x00,0x0C,0x0C,0x09,0xD2,0xFC,0xD3,0x0C,
	0x00,0x38,0x38,0x09,0xD2,0xFC,0xD3,0x0C,
	0x0C,0xD3,0xFC,0xD2,0x21,0xC0,0xC0,0x00,
	0x00,0x05,0x0A,0xD7,0xFB,0xDC,0x03,0x00,
	0x00,0x38,0x38,0x09,0xD2,0xFC,0xD3,0x0C,
	0x00,0x0B,0xDC,0xFB,0xD7,0x0A,0x05,0x00,
	0x00,0x20,0x7F,0xF8,0xB4,0x02,0x01,0x01,
	0x00,0x00,0x19,0x3F,0x7C,0x57,0x01,0x00,
	0x00,0x00,0x01,0x02,0x1C,0x3C,0x7B,0x58,
	0x00,0x00,0x19,0x3F,0x7C,0x57,0x01,0x00,
	0x00,0x00,0x19,0x3F,0x7C,0x57,0x01,0x00,
	0x20,0x10,0x20,0xFF,0xFC,0x26,0x12,0x08,
	0x00,0xC0,0x20,0xFF,0xFA,0x24,0xC0,0x00,
	0x00,0x00,0x30,0x7F,0xFE,0xA2,0x01,0x00,
    0x00,0x07,0x34,0x78,0xF8,0xB6,0x01,0x00,
	0x00,0x00,0x01,0x02,0x1C,0x3C,0x7B,0x58,
	0x00,0x07,0x34,0x78,0xF8,0xB6,0x01,0x00,
	0x00,0x00,0x01,0x02,0x1C,0x3C,0x7B,0x58,
	0x00,0x07,0x34,0x78,0xF8,0xB6,0x01,0x00,
	0x00,0x00,0x01,0x02,0x1C,0x3C,0x7B,0x58,
	};

void main()
{
	unsigned char i,Offset=0,Count=0;
	MatrixLED_Init();
	while(1)
	{
		for(i=0;i<8;i++)	
		{
			MatrixLED_ShowColumn(i,Animation[i+Offset]);
		}
		Count++;			
		if(Count>30)
		{
			Count=0;
			Offset+=8;		
			if(Offset>160)
			{
				Offset=0;
			}
		}
	}
}

延时函数

void Delay(unsigned int xms)
{
	unsigned char i, j;
	while(xms--)
	{
		i = 2;
		j = 239;
		do
		{
			while (--j);
		} while (--i);
	}
}

 在mian函数中引用延时函数

#ifndef __DELAY_H__
#define __DELAY_H__

void Delay(unsigned int xms);

#endif

单片机点阵，显示kun 

 

#include <REG52.H>
#include "Delay.h"

sbit RCK=P3^5;		//RCLK
sbit SCK=P3^6;		//SRCLK
sbit SER=P3^4;		//SER

#define MATRIX_LED_PORT		P0

/**
  * @brief  74HC595??????
  * @param  Byte ??????
  * @retval ?
  */
void _74HC595_WriteByte(unsigned char Byte)
{
	unsigned char i;
	for(i=0;i<8;i++)
	{
		SER=Byte&(0x80>>i);
		SCK=1;
		SCK=0;
	}
	RCK=1;
	RCK=0;
}

/**
  * @brief  ??????
  * @param  ?
  * @retval ?
  */
void MatrixLED_Init()
{
	SCK=0;
	RCK=0;
}

/**
  * @brief  LED?????????
  * @param  Column ?????,??:0~7,0????
  * @param  Data ????????,????,1??,0??
  * @retval ?
  */
void MatrixLED_ShowColumn(unsigned char Column,Data)
{
	_74HC595_WriteByte(Data);
	MATRIX_LED_PORT=~(0x80>>Column);
	Delay(1);
	MATRIX_LED_PORT=0xFF;
}

 

 

在main函数中引用头文件 

#ifndef __MATRIX_LED_H__
#define __MATRIX_LED_H__

void MatrixLED_Init();
void MatrixLED_ShowColumn(unsigned char Column,Data);


#endif

效果如下 

 

 

新人发帖，多多包含。金盆打水银盆装，原量原谅