powerPC P2020 uboot引导kernel 串口没有打印信息啦，

=> printenv
bootdelay=10
baudrate=115200
loads_echo=1
rootpath=/opt/nfsroot
hostname=P2020RDB
bootfile=uImage
loadaddr=1000000
ipaddr=192.168.75.75
netmask=255.255.0.0
ethaddr=00:00:00:11:11:11
eth1addr=00:00:00:22:22:22
stdin=serial
stdout=serial
stderr=serial
ethact=eTSEC1
bootargs=root=/dev/ram rw console=ttyS0,115200 ramdisk_size=600000 cache-sram-size=0x10000 这里有问题吗？
serverip=192.168.75.130

Environment size: 379/8188 bytes
=> tftp 1000000 uImage
Waiting for PHY auto negotiation to complete...... TIMEOUT !
eTSEC1: No link.
Speed: 100, full duplex
Using eTSEC3 device
TFTP from server 192.168.75.130; our IP address is 192.168.75.75
Filename 'uImage'.
Load address: 0x1000000
Loading: #################################################################
         #################################################################
         #################################################################
         #######################
done
Bytes transferred = 3198795 (30cf4b hex)
=> tftp 2000000 rootfs.ext2.gz.uboot
Speed: 100, full duplex
Using eTSEC3 device
TFTP from server 192.168.75.130; our IP address is 192.168.75.75
Filename 'rootfs.ext2.gz.uboot'.
Load address: 0x2000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ############
done
Bytes transferred = 5897185 (59fbe1 hex)
=> tftp c00000 p2020rdb.dtb
Speed: 100, full duplex
Using eTSEC3 device
TFTP from server 192.168.75.130; our IP address is 192.168.75.75
Filename 'p2020rdb.dtb'.
Load address: 0xc00000
Loading: #
done
Bytes transferred = 11738 (2dda hex)
=> bootm 1000000 2000000 c00000
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   Linux-2.6.32
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    3198731 Bytes = 3.1 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02000000 ...
   Image Name:   uboot ext2 ramdisk rootfs
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5897121 Bytes = 5.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 00c00000
   Booting using the fdt blob at 0xc00000
   Uncompressing Kernel Image ... OK
   Loading Ramdisk to 1f8cd000, end 1fe6cba1 ... OK
   Loading Device Tree to 00ffa000, end 00fffdd9 ... OK 在这之后就没打印信息啦；