SPARTAN 6(XC6SLX9-TQG144) PCB Design
Power Distribution System
PCB Decoupling Capacitors
The impedance of the alternate network must be less
than or equal to that of the recommended network across frequencies from 100 KHz to
500 MHz.
[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-wOpeezqL-1578562834463)(http://139.199.225.16/blog_pic/2017_06_01/1.png)]
0805 Ceramic Capacitor
[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-qsFWOBoD-1578562834465)(http://139.199.225.16/blog_pic/2017_06_01/2.png)]
0402 Ceramic Capacitor
[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-M8RFwOqM-1578562834471)(http://139.199.225.16/blog_pic/2017_06_01/3.png)]
Basic PDS Principles
Peak-to-Peak VRIPPLE < Vcc * 10%.
Capacitor Parasitic Inductance
Requirements for choosing decoupling capacitors:
• For a specific capacitance value, choose the smallest package available.
or
• For a specific package size (essentially a fixed inductance value), choose the highest
capacitance value available in that package.
Surface-mount chip capacitors are the smallest capacitors available and are a good choice
for discrete decoupling capacitors:
• For values from 100 µF to very small values such as 0.01 µF, X7R or X5R type
capacitors are usually used. These capacitors have a low parasitic inductance and a
low ESR, with an acceptable temperature characteristic.
• For larger values, such as 100 µF to 1000 µF, tantalum capacitors are used. These
capacitors have a low parasitic inductance and a medium ESR, g