warning

1、Warning: Synthesized away the following RAM node(s):
Warning (14320): Synthesized away node "Square_FIFO:inst27|scfifo:scfifo_component|scfifo_re51:auto_generated|a_dpfifo_7231:dpfifo|dpram_d111:FIFO。。。

注释：No action is required. If you do not want Analysis & Synthesis to synthesize these nodes away, check the design to make sure the correct nodes are used to drive the design outputs.1.这个fifo被优化掉了2.原因是此fifo并不影响你任何一个顶层的信号，所以认为是无用的东西，故优化

2、Warning (332060): Node: clk_30m was determined to be a clock but was found without an associated clock assignment.

解决方法：因为没有SDC时序约束文件。综合一次后，可进TimeQuest用向导一步步生成一个简单的SDC文件，保存成【工程名】.sdc放在工程目录下再综合一遍即可。

 

转载于:https://www.cnblogs.com/115412hou/articles/3421653.html