Third Party Device Support for ‘Nordic nRF51822_xxAA‘ (Device not include in Legacy Device Database

mdk5打开百度手环工程时有以上弹框，且项目无法编译。

 

nordic官网解释：You are trying to open up a Keil 4 project in Keil 5, and then it looks in the Legacy Device Database for the target. For some reason the xxAC chip is missing in this database. However, you should be able to just ignore the warning message. The project should compile just fine. You can also open the Keil 5 project in the arm5_no_packs folder, and the warning message should go away.

问题出在了mdk5打开keil4工程的不兼容。

解决办法：https://www2.keil.com/mdk5/legacy/

下载MDK v4 Legacy Support

其功能：

     MDK Version 5 uses Software Packs to support a microcontroller device and to use middleware. To maintain backward compatibility with MDK Version 4 you may install Legacy Support. This might be necessary for two reasons:

• To maintain projects created with MDK Version 4 without migrating to Software Packs.
• To use older devices that are not supported by a Device Family Pack.

最终，项目可以编译。打开项目时弹框依然会弹出，但是没影响了。

不知道怎么样彻底解决弹框。