openstack安装keystone

一 基于模板复制虚拟机

输入CTRL+o，弹出复制电脑

二 启动虚拟机controller0并登陆

登陆成功。

[root@controller0 ~]# ifconfig
eth0      Link encap:Ethernet  HWaddr 08:00:27:26:76:FC  
          inet addr:10.20.0.10  Bcast:10.20.0.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe26:76fc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5243 (5.1 KiB)  TX bytes:6141 (5.9 KiB)
          Interrupt:19 Base address:0xd020
eth3      Link encap:Ethernet  HWaddr 08:00:27:BE:44:59  
          inet addr:10.0.5.15  Bcast:10.0.5.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:febe:4459/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:809 (809.0 b)  TX bytes:1182 (1.1 KiB)
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:228 (228.0 b)  TX bytes:228 (228.0 b)

三 控制节点安装（controller0）

1 主机名设置

[root@controller0 ~]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=controller0

2 网卡配置

[root@controller0 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
TYPE=Ethernet
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=static
IPADDR=10.20.0.10
NETMASK=255.255.255.0

四 基本服务安装与配置（cont