storm几个必知的概念

5 篇文章 0 订阅
4 篇文章 0 订阅

This page lists the main concepts of Storm and links to resources where you can find more information. The concepts discussed are:

  1. Topologies
  2. Streams
  3. Spouts
  4. Bolts
  5. Stream groupings
  6. Reliability
  7. Tasks
  8. Workers

Topologies

The logic for a realtime application is packaged into a Storm topology. A Storm topology is analogous to a MapReduce job. One key difference is that a MapReduce job eventually finishes, whereas a topology runs forever (or until you kill it, of course). A topology is a graph of spouts and bolts that are connected with stream groupings. These concepts are described below.

Resources:

Streams

The stream is the core abstraction in Storm. A stream is an unbounded sequence of tuples that is processed and created in parallel in a distributed fashion. Streams are defined with a schema that names the fields in the stream's tuples. By default, tuples can contain integers, longs, shorts, bytes, strings, doubles, floats, booleans, and byte arrays. You can also define your own serializers so that custom types can be used natively within tuples.

Every stream is given an id when declared. Since single-stream spouts and bolts are so common, OutputFieldsDeclarer has convenience methods for declaring a single stream without specifying an id. In this case, the stream is given the default id of "default".

Resources:

Spouts

A spout is a source of streams in a topology. Generally spouts will read tuples from an external source and emit them into the topology (e.g. a Kestrel queue or the Twitter API). Spouts can either be reliable or unreliable. A reliable spout is capable of replaying a tuple if it failed to be processed by Storm, whereas an unreliable spout forgets about the tuple as soon as it is emitted.

Spouts can emit more than one stream. To do so, declare multiple streams using the declareStream method of OutputFieldsDeclarer and specify the stream to emit to when using the emit method on SpoutOutputCollector.

The main method on spouts is nextTuplenextTuple either emits a new tuple into the topology or simply returns if there are no new tuples to emit. It is imperative that nextTuple does not block for any spout implementation, because Storm calls all the spout methods on the same thread.

The other main methods on spouts are ack and fail. These are called when Storm detects that a tuple emitted from the spout either successfully completed through the topology or failed to be completed. ack and fail are only called for reliable spouts. See the Javadocfor more information.

Resources:

Bolts

All processing in topologies is done in bolts. Bolts can do anything from filtering, functions, aggregations, joins, talking to databases, and more.

Bolts can do simple stream transformations. Doing complex stream transformations often requires multiple steps and thus multiple bolts. For example, transforming a stream of tweets into a stream of trending images requires at least two steps: a bolt to do a rolling count of retweets for each image, and one or more bolts to stream out the top X images (you can do this particular stream transformation in a more scalable way with three bolts than with two).

Bolts can emit more than one stream. To do so, declare multiple streams using the declareStream method of OutputFieldsDeclarer and specify the stream to emit to when using the emit method on OutputCollector.

When you declare a bolt's input streams, you always subscribe to specific streams of another component. If you want to subscribe to all the streams of another component, you have to subscribe to each one individually. InputDeclarer has syntactic sugar for subscribing to streams declared on the default stream id. Saying declarer.shuffleGrouping("1") subscribes to the default stream on component "1" and is equivalent to declarer.shuffleGrouping("1", DEFAULT_STREAM_ID).

The main method in bolts is the execute method which takes in as input a new tuple. Bolts emit new tuples using the OutputCollector object. Bolts must call the ack method on the OutputCollector for every tuple they process so that Storm knows when tuples are completed (and can eventually determine that its safe to ack the original spout tuples). For the common case of processing an input tuple, emitting 0 or more tuples based on that tuple, and then acking the input tuple, Storm provides an IBasicBolt interface which does the acking automatically.

Its perfectly fine to launch new threads in bolts that do processing asynchronously. OutputCollector is thread-safe and can be called at any time.

Resources:

Stream groupings

Part of defining a topology is specifying for each bolt which streams it should receive as input. A stream grouping defines how that stream should be partitioned among the bolt's tasks.

There are seven built-in stream groupings in Storm, and you can implement a custom stream grouping by implementing theCustomStreamGrouping interface:

  1. Shuffle grouping: Tuples are randomly distributed across the bolt's tasks in a way such that each bolt is guaranteed to get an equal number of tuples.
  2. Fields grouping: The stream is partitioned by the fields specified in the grouping. For example, if the stream is grouped by the "user-id" field, tuples with the same "user-id" will always go to the same task, but tuples with different "user-id"'s may go to different tasks.
  3. All grouping: The stream is replicated across all the bolt's tasks. Use this grouping with care.
  4. Global grouping: The entire stream goes to a single one of the bolt's tasks. Specifically, it goes to the task with the lowest id.
  5. None grouping: This grouping specifies that you don't care how the stream is grouped. Currently, none groupings are equivalent to shuffle groupings. Eventually though, Storm will push down bolts with none groupings to execute in the same thread as the bolt or spout they subscribe from (when possible).
  6. Direct grouping: This is a special kind of grouping. A stream grouped this way means that the producer of the tuple decides which task of the consumer will receive this tuple. Direct groupings can only be declared on streams that have been declared as direct streams. Tuples emitted to a direct stream must be emitted using one of the emitDirect methods. A bolt can get the task ids of its consumers by either using the provided TopologyContext or by keeping track of the output of the emit method in OutputCollector (which returns the task ids that the tuple was sent to).
  7. Local or shuffle grouping: If the target bolt has one or more tasks in the same worker process, tuples will be shuffled to just those in-process tasks. Otherwise, this acts like a normal shuffle grouping.

Resources:

  • TopologyBuilder: use this class to define topologies
  • InputDeclarer: this object is returned whenever setBolt is called on TopologyBuilder and is used for declaring a bolt's input streams and how those streams should be grouped
  • CoordinatedBolt: this bolt is useful for distributed RPC topologies and makes heavy use of direct streams and direct groupings

Reliability

Storm guarantees that every spout tuple will be fully processed by the topology. It does this by tracking the tree of tuples triggered by every spout tuple and determining when that tree of tuples has been successfully completed. Every topology has a "message timeout" associated with it. If Storm fails to detect that a spout tuple has been completed within that timeout, then it fails the tuple and replays it later.

To take advantage of Storm's reliability capabilities, you must tell Storm when new edges in a tuple tree are being created and tell Storm whenever you've finished processing an individual tuple. These are done using the OutputCollector object that bolts use to emit tuples. Anchoring is done in the emit method, and you declare that you're finished with a tuple using the ack method.

This is all explained in much more detail on Guaranteeing message processing.

Tasks

Each spout or bolt executes as many tasks across the cluster. Each task corresponds to one thread of execution, and stream groupings define how to send tuples from one set of tasks to another set of tasks. You set the parallelism for each spout or bolt in the setSpout andsetBolt methods of TopologyBuilder.

Workers

Topologies execute across one or more worker processes. Each worker process is a physical JVM and executes a subset of all the tasks for the topology. For example, if the combined parallelism of the topology is 300 and 50 workers are allocated, then each worker will execute 6 tasks (as threads within the worker). Storm tries to spread the tasks evenly across all the workers.

Resources:


================================================================
storm上述的几个概念需要清楚,另外就是下面这些点需要知道
1.首先需要清楚worker,executor,task以及之间的关系
2.component有哪些
3.本地与集群的两种模式下有什么区别
4.关于数据模型,目前序列化是用 Kryo,之后会据说会支持动态类型
5.storm支持哪些业务场景
6.可靠性的如何保障
7.从底层stream数据各种流向可以看到基于了zeromq几种模式
8.核心代码clojure与其他java代码各种互调


评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值