Please set RAT_ELRACKTYPE and try again

今天在客户现场做健康检查时出现这个问题
[root@el01cn01 exachk]# ./exachk 


Unable to determine rack type. Please set RAT_ELRACKTYPE and try again


在Oracle MOS中发现了解决方法

Error 1:

Unable to determine rack type. Please set RAT_ELRACKTYPE and try again.

Error 2:

Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory
Sun OEM cli command failed

Unable to determine rack type. Please set RAT_ELRACKTYPE and try again

Solution: To address this issue you can implement one of below 2 solutions.

1. Set the RAT_ELRACKTYPE environment variable for an eight rack (0), quarter rack (1), half rack (2), or full rack (3) Exalogic machine, before re-running Exachk, using the command like the following:
   
   
   export RAT_ELRACKTYPE="3"
   
   (or)
2. Copy exalogic_machine.conf from one of the other nodes where the config file is present. The file is located at /opt/exalogic/usr/lib/init-exalogic-node/exalogic_machine.conf

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/26474945/viewspace-1342152/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/26474945/viewspace-1342152/