Android devices are great, but their small size can sometimes be limiting. When you connect your device to a projector, you can share your screen with others for business or pleasure. Here are a few ways to do it.
Android设备很棒，但它们的体积有时会受到限制。 将设备连接到投影仪时，您可以与他人共享屏幕以用于商务或休闲。 这里有几种方法。
If you don’t have a projector, you can also connect Android to a TV. Projectors are the better option, though, as they normally project a much bigger screen size than a TV, making them ideal for media playback or data presentations.
如果您没有投影仪，还可以将Android连接到电视 。 不过，投影仪是更好的选择，因为投影仪通常投影的屏幕尺寸比电视大得多，因此非常适合媒体播放或数据演示。
通过Chromecast无线连接 (Connect Wirelessly via Chromecast)
The easiest method to connect an Android device to a projector is to use Google Chromecast. To do this, your projector must support HDMI connections.
将Android设备连接到投影仪的最简单方法是使用Google Chromecast。 为此，投影仪必须支持HDMI连接。
Once you plug your Chromecast into the HDMI port, you can then wirelessly stream your Android device screen to it. Your Chromecast will then display the contents through the projector.
将Chromecast插入HDMI端口后，即可将其Android设备屏幕以无线方式传输到该端口。 然后，您的Chromecast将通过投影仪显示内容。
Make sure you’ve disabled any power-save mode on your Android device, as this can reduce the quality of the stream.
确保您已禁用Android设备上的任何节能模式，因为这会降低流的质量。
If you don’t already have the Google Home app, download and install it from the Google Play Store.
如果您还没有Google Home应用， 请从Google Play商店下载并安装 。
Open the “Home” app, and then tap the Accounts tab in the bottom-right corner.
打开“主页”应用程序，然后点击右下角的“帐户”标签。
Scroll down and tap “Mirror Device.”
向下滚动并点击“镜像设备”。
If you see a warning that your device isn’t optimized for casting, tap “OK.” This shouldn’t prevent you from casting your screen to a Chromecast.
如果您看到设备未针对投放进行优化的警告，请点击“确定”。 这不应阻止您将屏幕投射到Chromecast。
Tap “Cast Screen/Audio,” and then select your Chromecast to connect to it.
点按“广播屏幕/音频”，然后选择要连接的Chromecast。
Once you’re connected, your screen should begin streaming to your projector through your Chromecast.
建立连接后，您的屏幕应开始通过Chromecast流式传输到投影仪。
有线连接 (Wired Connections)
If a wireless option isn’t suitable, you can use a wired connection instead. All Android devices come with either a microUSB or USB-C option.
如果无线选项不合适，则可以改用有线连接。 所有Android设备均配有microUSB或USB-C选项。
With the right cable, you can connect your Android device to a projector that directly uses an HDMI cable. Another supported standard is MHL, which also connects via HDMI ports.
使用正确的电缆，您可以将Android设备连接到直接使用HDMI电缆的投影仪。 另一个受支持的标准是MHL，它也通过HDMI端口连接。
USB-C转HDMI电缆 (USB-C to HDMI Cable)
Newer Android devices, like the latest Samsung phones, use USB-C to charge. If you have a USB-C device, you can use a USB-C to HDMI cable to connect your device directly to an HDMI-capable projector.
较新的Android设备(例如最新的三星手机)使用USB-C充电。 如果您具有USB-C设备，则可以使用USB-C至HDMI电缆将设备直接连接到具有HDMI功能的投影仪。
You shouldn’t have to do anything other than connect your USB-C device to your projector. Make sure the projector is set to the correct HDMI input.
除了将USB-C设备连接到投影仪外，您无需执行任何其他操作。 确保将投影机设置为正确的HDMI输入。
Be aware, however, that one disadvantage of USB-C to HDMI is lack of power. If you use other wired methods, like MHL, you can power your device while connected.
但是请注意，USB-C转HDMI的缺点之一是电源不足。 如果您使用其他有线方式(例如MHL)，则可以在连接时为设备供电。
移动高清链接(MHL) (Mobile High-Definition Link (MHL))
Mobile High-Definition Link (MHL) uses specially-designed HDMI cables. Unlike the newer USB-C method, MHL cables use microUSB. As mentioned above, it can also power your device while providing digital video and audio.
移动高清链接(MHL)使用专门设计的HDMI电缆。 与更新的USB-C方法不同， MHL电缆使用microUSB 。 如上所述，它还可以在提供数字视频和音频的同时为设备供电。
Some projectors support HDMI, but you’ll need to look specifically for an HDMI port with an MHL label on your projector. If you don’t see one, it won’t power your device. Your Android device also has to support MHL.
某些投影仪支持HDMI，但是您需要专门寻找带有MHL标签的HDMI端口。 如果看不到，则无法为您的设备供电。 您的Android设备还必须支持MHL。
To connect via MHL, you shouldn’t have to do anything on your Android device, other than connect it to your projector with a suitable cable. On your projector, switch the input to the corresponding MHL HDMI port to see your projected Android screen.
要通过MHL连接，除了使用合适的电缆将其连接至投影仪外，您无需在Android设备上执行任何操作。 在投影仪上，将输入切换到相应的MHL HDMI端口以查看投影的Android屏幕。
无线连接 (Wireless Connections)
Miracast and Wi-Fi Direct are wireless standards that connect devices to other devices like displays. Previously, Android officially supported Miracast but dropped it with Android 6 Marshmallow. Miracast still works with some Android devices, though, because it’s based on Wi-Fi Direct, which is still supported by Android.
Miracast和Wi-Fi Direct是将设备连接到其他设备(例如显示器)的无线标准 。 之前，Android正式支持Miracast，但在Android 6 Marshmallow中将其删除。 不过，Miracast仍然可以在某些Android设备上使用，因为它基于Wi-Fi Direct，而Android仍支持该功能。
Unless both devices specifically state they support Wi-Fi Direct or Miracast, the best way to see if it will connect is to use one of these standards to try it.
除非两个设备都明确声明它们支持Wi-Fi Direct或Miracast，否则要查看是否可以连接，最好的方法是使用以下标准之一进行尝试。
To start, on your projector, look for “Screen Mirroring,” “Device Mirroring,” or a similarly named setting, and then switch to that mode.
首先，在投影机上，寻找“屏幕镜像”，“设备镜像”或类似名称的设置，然后切换到该模式。
The best way to connect using Miracast is to use a third-party app, like Castto, to make the connection. As it’s no longer officially supported, using Miracast with modern Android devices is not guaranteed to work.
使用Miracast进行连接的最佳方法是使用第三方应用(例如Castto)进行连接。 由于不再受正式支持，因此不能保证在现代Android设备上使用Miracast。
If that’s the case, use a Chromecast, wired connection, or attempt to use Wi-Fi Direct.
在这种情况下，请使用Chromecast，有线连接或尝试使用Wi-Fi Direct。
Wi-Fi Direct (Wi-Fi Direct)
If you want to use Wi-Fi Direct, you can do this within Android directly. These steps might vary slightly depending on your version of Android and your device.
如果您想使用Wi-Fi Direct，则可以直接在Android中执行此操作。 这些步骤可能会略有不同，具体取决于您的Android版本和设备。
You need a projector that supports Wi-Fi Direct and allows you to stream your screen using this method.
您需要一台支持Wi-Fi Direct并允许您使用此方法流式传输屏幕的投影仪。
To begin, swipe down on your display to access your notification shade, and then tap the gear icon to access your Android “Settings” menu. Alternatively, you can access your “Settings” menu from the apps drawer.
首先，在显示屏上向下滑动以访问通知栏，然后点击齿轮图标以访问Android的“设置”菜单。 或者，您可以从应用程序抽屉访问“设置”菜单。
If you’re on a Samsung device, tap “Connections.” On other Android devices, you might need to tap “Network & Internet” instead.
如果您使用的是三星设备，请点击“连接”。 在其他Android设备上，您可能需要点击“网络和Internet”。
Tap “Wi-Fi” to access the Wi-Fi menu.
点按“ Wi-Fi”以访问Wi-Fi菜单。
In the Wi-Fi menu, ensure the setting is turned on, and then tap “Wi-Fi Direct.” On other Android devices, you might have to tap “Advanced” or “Wi-Fi Preferences” in this menu first, and then tap “Wi-Fi Direct” to access that menu.
在Wi-Fi菜单中，确保已打开设置，然后点击“ Wi-Fi Direct”。 在其他Android设备上，您可能必须先在此菜单中点击“高级”或“ Wi-Fi首选项”，然后点击“ Wi-Fi Direct”以访问该菜单。
Your device will scan automatically for available Wi-Fi Direct devices. If it locates your projector, tap the option to connect, and then follow the instructions.
您的设备将自动扫描可用的Wi-Fi Direct设备。 如果找到您的投影仪，请点击选项进行连接，然后按照说明进行操作。
三星设备上的智能视图 (Smart View on Samsung Devices)
If you own a Samsung device, you can use Smart View to connect to some devices wirelessly. Swipe down your notifications shade and tap “Smart View” in your quick actions list.
如果您拥有三星设备，则可以使用Smart View无线连接到某些设备。 向下滑动通知栏，然后在快速操作列表中点击“智能视图”。
Your device will scan for nearby Chromecast or Miracast devices. Locate your device, and then tap it to connect. Your Samsung device should connect to your projector and begin streaming to it.
您的设备将扫描附近的Chromecast或Miracast设备。 找到您的设备，然后点击它进行连接。 您的Samsung设备应连接到投影仪并开始流式传输。
制造商应用 (Manufacturer Apps)
Some projector manufacturers offer their own Android apps that allow you to connect directly to the projector from your device via Wi-Fi.
一些投影仪制造商提供了自己的Android应用程序，使您可以通过Wi-Fi从设备直接连接到投影仪。
Apps like Panasonic Wireless Projector, Epson iProjection, and Projector Quick Connection are all examples of apps you could try, depending on the manufacturer of your projector.
松下无线投影仪 ， 爱普生iProjection和投影仪快速连接之类的应用程序都是可以尝试使用的示例，具体取决于投影机的制造商。
These apps might not allow you to project your entire screen, but they should allow you to project static images or document files to your projector. While this wouldn’t be a useful method to stream media, it could come in handy for business presentations.
这些应用程序可能不允许您投影整个屏幕，但应允许您将静态图像或文档文件投影到投影仪。 尽管这不是流媒体的有用方法，但对于商务演示可能会派上用场。
翻译自: https://www.howtogeek.com/443080/how-to-connect-your-android-device-to-a-projector/
4400
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
