翻录cda文件_翻录电视连续剧DVD并转换为单独的H.264 MP4文件

翻录cda文件

Would you like to rip an entire TV Series disc set and convert the episodes to individual MP4 files? Today we’ll take a look at how to setup and batch process an entire DVD set using Handbrake and the H.264 codec.

您想翻录整个电视连续剧光盘集并将这些剧集转换为单个MP4文件吗？ 今天，我们将研究如何使用Handbrake和H.264编解码器设置和批处理整个DVD集。

In all likelihood, any commercial DVD will be copy protected. Handbrake doesn’t have the native ability to remove copy protection. So we will use HD Decrypter, which is the always free module of the DVDFab software suite, to rip each DVD to a folder on our hard drive. Then we’ll use Handbrake to convert the episodes in those folders to individual MP4 files.

任何商业DVD极有可能受到版权保护。 手刹没有删除复制保护的本机功能。 因此，我们将使用HD Decrypter(这是DVDFab软件套件中始终免费的模块)将每张DVD翻录到硬盘驱动器上的文件夹中。 然后，我们将使用Handbrake将这些文件夹中的情节转换为单独的MP4文件。

Note: You’ll get full access to all the options in DVDFab  during the 30 trial period. HD Decrypter is always free. You’ll also want to be sure you have plenty of free hard drive space. In our example, we use a 5 disc set that took up over 30 GB when ripped to a hard drive.

注意：在30个试用期内，您将完全访问DVDFab中的所有选项。 HD Decrypter始终免费。 您还需要确保有足够的可用硬盘空间。 在我们的示例中，我们使用5张光盘集将其翻录到硬盘驱动器时占用了30 GB以上的空间。

Download and install DVDFab. You’ll find the download link below.

下载并安装DVDFab。 您将在下面找到下载链接。

Open DVDFab and insert the first disc in the series set. DVDFab will open the DVD source.

打开DVDFab并将第一张光盘插入系列集中。 DVDFab将打开DVD源。

Next we’ll check the settings so that the default output is a DVD folder. Click the green button at the top right.

接下来，我们将检查设置，以使默认输出为DVD文件夹。 点击右上角的绿色按钮。

Note: After the 30 day trial expires, you can skip this step. Output to a DVD folder will be the only option.

注意：30天试用期到期后，您可以跳过此步骤。 输出到DVD文件夹将是唯一的选择。

Select DVD to DVD on the left pane and choose DVD folder as the Default output type.

在左窗格上选择DVD to DVD，然后选择DVD文件夹作为默认输出类型。

Select Full Disc from the options on the left. (This should be the default)

从左侧的选项中选择Full Disc。 (这应该是默认值)

Click Start when you are ready.

准备好后，请单击开始。

Conversion times for HD Decrypter will vary depending on hardware, but it is generally pretty quick.

HD Decrypter的转换时间因硬件而异，但通常很快。

When the process is complete, click OK.

该过程完成后，单击“确定”。

Select Finish. Now repeat this process for each DVD in the set.

选择完成。 现在，对集中的每个DVD重复此过程。

When you are finished you should have folder for each DVD in the set.

完成后，您应该为每个DVD拥有一个文件夹。

Handbrake

手刹

Download, install, and run Handbrake. You’ll find the download link below. The first thing we’ll do is configure the settings. To simplify the process of choosing output settings, Handbrake has a group of of presets. If converting specifically for one of the Apple devices listed in the preset list, simply click on that device and the settings will be automatically applied in the Output Settings tabs. For basic PC or universal output, select the Normal profile or High Profile.

下载，安装并运行Handbrake。 您将在下面找到下载链接。 我们要做的第一件事是配置设置。 为了简化选择输出设置的过程，Handbrake有一组预设。 如果专门为预设列表中列出的其中一台Apple设备进行转换，则只需单击该设备，设置就会自动应用到“输出设置”选项卡中。 对于基本PC或通用输出，请选择“普通”配置文件或“高级”配置文件。

Now we are ready to add the episodes to our queue to be converted. Select Source and then choose DVD / VIDEO_TS folder.

现在我们准备将情节添加到要转换的队列中。 选择源，然后选择DVD / VIDEO_TS文件夹。

Select the first folder in the series and click OK.

选择系列中的第一个文件夹，然后单击“确定”。

Select the Title dropdown list and inspect the listings. You’ll see a group of titles and durations. You should find a group of titles with running times that match the approximate running time of a single episode in the series. In our example, we are converting a series of one hour shows, so we have two titles running close to an hour. For a broadcast TV program it will be more like 40-45 minutes for an hour show and 20 minutes or so for a half hour program. You may want to refer to the original DVD if you aren’t sure of the number of episodes per disc and running times.

选择标题下拉列表并检查列表。 您会看到一组标题和持续时间。 您应该找到一组字幕，其运行时间与该系列中单个情节的大概运行时间相匹配。 在我们的示例中，我们要转换一系列的一小时的节目，因此我们有两个标题运行将近一个小时。 对于广播电视节目，一个小时的节目更像40-45分钟，而一个半小时的节目则更像20分钟左右。 如果不确定每张光盘的集数和运行时间，则可能要参考原始DVD。

You can ignore any additional smaller clip. They are likely to be intros and extras. Select the first title you’d like to add from the dropdown list.

您可以忽略任何其他较小的剪辑。 它们可能是介绍影片和其他内容。 从下拉列表中选择要添加的第一个标题。

You can manually rename the file right in the destination text box if you wish. Careful, Handbrake will automatically give your file a M4V extension if you choose MP4, so be sure you change this unless you will be playing the files only on an iPod.

您可以根据需要在目标文本框中手动重命名文件。 小心，如果选择MP4，Handbrake会自动为您的文件提供M4V扩展名，因此，除非您仅在iPod上播放文件，否则请确保将其更改。

Select Add to Queue when ready.

准备好后，选择添加到队列。

When you’ve added each episode from the first disc to the queue, continue adding episodes from the next disc. Repeat this process until you have added each episode to the Queue.

将第一张光盘中的每个片段添加到队列后，请继续添加下一张光盘中的片段。 重复此过程，直到将每个情节添加到队列中。

When you’ve added everything, click Start on the Main interface to begin the process.

添加完所有内容后，请在主界面上单击“开始”以开始该过程。

Handbrake will begin the process of converting the episodes one at a time.

手刹将开始一次转换情节的过程。

When the process is finished you’ll have a season’s worth of individual MP4 files. Once you’ve verified all the MP4 files are to your liking you may want to consider deleting the original DVD rip folders to free up some hard drive space.

完成该过程后，您将获得一个季节的单个MP4文件。 验证完所有MP4文件后，您可能需要考虑删除原始DVD rip文件夹以释放一些硬盘空间。

Now you’re ready to enjoy the series.

现在，您可以享受该系列了。

Conclusion

结论

Handbrake will give you good quality output at a greatly reduced file size, but it is rather slow. Be prepared for quite a wait when converting an entire season DVD. If you prefer to get the full DVD contents from your hard drive, you may want to check out our previous post on how to Rip a DVD to your Hard Drive and Play it on your PC.

手刹将在减小文件大小的情况下为您提供高质量的输出，但是速度很慢。 转换整个季节的DVD时，请等待一段时间。 如果您希望从硬盘驱动器中获取完整的DVD内容，则可能需要查看我们以前的文章，内容是如何将DVD翻录到硬盘驱动器并在PC上播放 。

翻译自: https://www.howtogeek.com/howto/20893/rip-a-tv-series-dvd-and-convert-to-individual-h.264-mp4-files/

翻录cda文件