nest 设置密码_如何恢复出厂设置和卸载Nest Thermostat

nest 设置密码

If you’re replacing your Nest Thermostat, or are moving and want to take it with you to your new place, here’s how to factory reset and uninstall it.

如果您要更换Nest Nest温控器，或者正在移动并将其随身携带到新地点，请按照以下方法将其恢复出厂设置并卸载。

Even if you’re keeping your Nest Thermostat, but are simply just moving it to a new house, you’ll still need to factory reset it, since the Wi-Fi network will be different, and more importantly, the heating and cooling systems at the new house might be different from what your Nest Thermostat originally had set up.

即使您将Nest Thermostat保留下来，而只是将其移至新房中，由于Wi-Fi网络会有所不同，更重要的是，供暖和制冷系统仍需要恢复出厂设置新房子中的温度可能与您的Nest Thermostat最初设置的温度不同。

Luckily, it’s pretty quick and easy to factory reset your Nest Thermostat and uninstall it from the wall.

幸运的是，将Nest Nest Thermostat重置为出厂设置并从墙上卸载非常简单快捷。

如何恢复出厂设置的Nest Thermostat (How to Factory Reset the Nest Thermostat)

Start by clicking on the Nest Thermostat unit to bring up the main menu.

首先单击Nest Nest Thermostat单元以调出主菜单。

Scroll to “Settings” and select it.

滚动到“设置”并选择它。

Scroll all the way to the right and select “Reset”.

一直滚动到右侧，然后选择“重设”。

Choose “All Settings” at the very bottom.

选择最底部的“所有设置”。

Select “Reset” on the next screen to confirm.

在下一个屏幕上选择“重置”进行确认。

Turn the silver ring to the right until the dial moves all the way to the other side.

向右转动银环，直到刻度盘一直移动到另一侧。

Push on the unit to select “OK”.

推动本机选择“确定”。

From there, you’ll have 10 seconds to cancel the reset if you’d like.

从那里开始，您可以在10秒钟内取消重置。

After that, it will begin the factory reset process. This only takes a few minutes.

之后，它将开始恢复出厂设置过程。 这只需要几分钟。

Once it’s done, you’ll see the language selection screen.

完成后，您将看到语言选择屏幕。

如何从墙上卸载Nest Thermostat (How to Uninstall the Nest Thermostat from Your Wall)

Once you see the language selection screen, you can take off the main unit of the Nest Thermostat and detach it from the wall plate. It will still stay powered on due to the internal battery meant for power outages, but you can let it run out and recharge it when you go to install the thermostat in the future.

看到语言选择屏幕后，您可以卸下Nest Thermostat的主机并将其从壁板上卸下。 由于用于断电的内置电池，它仍将保持开机状态，但是将来您可以在安装温控器时让它耗尽并为其充电。

Next, you’ll need to turn off the heating and cooling at the breaker box. Sometimes, the furnace and the air conditioner are on two separate breakers, so you’ll need to switch off both. Remember, this isn’t just for your own safety–not shutting off the heating and cooling completely can blow a fuse, which will require an electrician to fix.

接下来，您需要关闭断路器箱的加热和冷却。 有时，熔炉和空调位于两个单独的断路器上，因此您需要将两者都关闭。 请记住，这不只是为了您自己的安全-不能完全关闭加热和冷却装置，否则会烧断保险丝，这将需要电工进行修理。

You might also have to turn off a third breaker for the wire that gives the thermostat power. The diagram of your breaker box may say which breaker the thermostat is connected to, but if not, it’s a safe bet that if your thermostat is located in your living room, turning off the breaker for the living room will do the trick.

您可能还必须关闭用于提供恒温器电源的电线的第三个断路器。 您的断路器盒图中可能会显示恒温器连接到哪个断路器，但是如果没有，则可以肯定地说，如果恒温器位于您的客厅中，则关闭客厅的断路器即可解决问题。

Furthermore, your furnace’s main shutoff could be next to the furnace itself, rather than on the breaker box.

此外，您炉子的主要关闭口可能在炉子旁边，而不是在断路器箱上。

Next, head back to your thermostat. We recommend taking a voltage tester and confirming that there isn’t power running to the power wire. If there is, you need to go back to the breaker box and try turning off another breaker.

接下来，回到恒温器。 我们建议您使用电压测试仪，并确认电源线上没有电源。 如果有，您需要回到断路器盒并尝试关闭另一个断路器。

Once you’re sure everything is turned off, detach the small wires from the Nest’s wall plate by pushing down on the clips at the end and pulling out the wires. It’s a good idea to mark where these wires went. Most of the time, the color of the wire will correctly correspond to the letter of the terminal that it’s connected to (e.g. yellow wire connected to “Y”, white wire connected to “W”, and so on), but sometimes that isn’t the case, and you might have something like a blue wire connected to “Y”, so be sure to note this when you take apart the wires.

确定一切都已关闭后，通过向下推末端的夹子并拉出电线，将小电线从Nest的壁板上拆下。 标记这些导线的去向是一个好主意。 在大多数情况下，电线的颜色将正确对应于所连接端子的字母(例如，黄色电线连接到“ Y”，白色电线连接到“ W”，依此类推)，但有时并非如此，您可能会在“ Y”上连接一条蓝色导线，因此在拆解导线时请务必注意这一点。

After that, get a screwdriver and unscrew the two screws holding the wall plate in place.

之后，用螺丝刀松开将壁板固定到位的两个螺丝。

You can then remove the wall plate and begin the installation of a new thermostat.

然后，您可以卸下壁板并开始安装新的恒温器。

Depending on how big your new thermostat is, it may be a good idea to do some spackle, sanding, and painting to cover up where the old thermostat was, so it looks presentable with the new thermostat installed. Most smart thermostats will come with a large decorative plate, but sometimes that won’t cover up the old spot completely.

根据您的新恒温器的大小，最好进行一些铲子，打磨和喷漆以掩盖旧恒温器的位置，因此看起来很适合安装新恒温器。 大多数智能恒温器都带有大装饰板，但有时并不能完全掩盖旧位置。

如何从Nest帐户中删除Nest Thermostat (How to Remove the Nest Thermostat From Your Nest Account)

After you factory reset and uninstall your Nest Thermostat, you’ll need to remove it from your Nest account if you plan on selling or giving away the device.

恢复出厂设置并卸载Nest Thermostat后，如果您打算出售或赠送该设备，则需要将其从Nest帐户中删除。

Start by opening up the Nest app and tapping on the settings gear icon in the top-right corner of the screen.

首先打开Nest应用，然后点击屏幕右上角的设置齿轮图标。

Select your Nest Thermostat down at the bottom.

在底部选择您的Nest Thermostat。

Tap on “Remove thermostat”.

点击“删除恒温器”。

Tap on “Remove” when the pop-up confirmation appears.

当弹出确认出现时，点击“删除”。

Once that’s done, your Nest Thermostat will be removed from your Nest account and it will no longer appear on the Nest app’s main screen.

完成后，您的Nest Thermostat将从您的Nest帐户中删除，并且不会再出现在Nest应用程序的主屏幕上。

Again, you don’t need to remove your Nest Thermostat from your Nest account if you still plan on keeping the device, but you’ll absolutely need to do this if you’re going to sell it or give it to someone else.

同样，如果您仍然打算保留设备，则无需从Nest帐户中删除Nest Thermostat，但如果要出售它或将其出售给他人，则绝对需要这样做。

翻译自: https://www.howtogeek.com/254533/how-to-factory-reset-and-uninstall-your-nest-thermostat/

nest 设置密码