iphone sim_如何在iPhone上卸下或安装SIM卡

iphone sim

Every iPhone has a SIM card slot on its right side. That slot houses a tray that holds your iPhone’s SIM card. That SIM card lets your phone connect to your carrier so that you can make and get mobile data.

每个iPhone的右侧都有一个SIM卡插槽。 该插槽中装有一个托盘，用于存放iPhone的SIM卡。 该SIM卡可让您的手机连接到运营商，以便您制作和获取移动数据。

You might never need to access your SIM card if you bought your iPhone with one pre-installed from the carrier. However, if you buy a phone unlocked and SIM-free, or are buying used, you’re going to need to be familiar with what a SIM card is, and how to swap one out.

如果您从运营商处购买了预装了一部iPhone的手机，则可能永远不需要访问SIM卡。 但是，如果您购买的手机未解锁且没有SIM卡，或者正在购买二手手机，则需要熟悉SIM卡的含义以及如何换出SIM卡。

Thankfully, accessing an iPhone’s SIM card tray is not complicated, but you will need three things before you get started.

幸运的是，访问iPhone的SIM卡托盘并不复杂，但是开始之前您将需要三件事。

1. An iPhone (obviously)
   iPhone(显然)
2. The SIM card you want to install
   您要安装的SIM卡
3. A tool to poke into the side of your iPhone to eject the SIM tray
   戳入iPhone侧面以弹出SIM托盘的工具

That final one can be a little tricky. Depending on which iPhone you have, there might be a SIM card removal tool in the box. If there is, you’re good to go. If not, they’re stupid-cheap on Amazon, but you can also use an unfurled paperclip, a needle, or pretty much anything else that is slim and pointy. Just try not to stab yourself as you go.

最后一个可能有些棘手。 根据您所拥有的iPhone，包装盒中可能会有SIM卡移除工具。 如果有，那就很好。 如果不是这样的话，它们在Amazon上很便宜 ，但是您也可以使用展开的回形针，针头或几乎任何其他细长且尖的东西。 只是尽量不要在途中刺伤自己。

Once you have your SIM card removal tool (or a proxy), poke it into the small hole that forms part of the SIM tray. You should feel some resistance, and you need to push through that a little. If this is your first time doing this, it might feel a little odd, but you do need to exert a bit of force to get the tray out. Once you do that, the tray will start to eject, and all you need to at that point is pull it the rest of the way out.

使用SIM卡移除工具(或代理)后，将其戳入形成SIM托盘一部分的小Kong中。 您应该感到一些阻力，需要稍微克服一下。 如果这是您第一次这样做，可能会觉得有些奇怪，但是您确实需要施加一些力才能将托盘取出。 完成此操作后，托盘将开始弹出，此时您所要做的就是将其完全拉出。

Once the tray is out, remove any pre-existing SIM card and install the new one. Ensure that you have it the correct way around using the notched corners as a guide. Once the card is installed in the tray, re-insert the whole thing into your iPhone, ensuring the pin hole lines up with the hole in the phone as you do.

托盘取出后，取出所有现有的SIM卡并安装新的SIM卡。 确保使用正确的方式使用缺口角作为参考。 将卡安装到托盘中后，将整个物品重新插入iPhone中，并确保针Kong与手机中的Kong对齐。

After the card installation is complete, it should be recognized by your iPhone without any device restarts. If not, try toggling Airplane mode on and off, or restarting the iPhone completely. That should get you up and running just fine.

卡安装完成后，您的iPhone应该可以识别它，而无需重新启动任何设备。 如果不是，请尝试打开和关闭飞行模式，或者完全重新启动iPhone。 那应该可以使您正常运行。

翻译自: https://www.howtogeek.com/395346/how-to-remove-or-install-a-sim-card-on-an-iphone/

iphone sim