linksys 打印软件_有关备用Linksys固件的更多信息

linksys 打印软件

Just about two years ago Greg turned me on to alternate firmware for the ubiquitous Linksys WRT54G. This is the little router than could. You can pick these little guys up for a song but it's the thriving alternate firmware community that's so interesting.

大约两年前，格雷格(Greg)使我开始使用无处不在的Linksys WRT54G的备用固件。 这是比可能的小路由器。 您可以挑选这些小家伙听一首歌，但这是蓬勃发展的备用固件社区，它非常有趣。

LinksysInfo.org has the best listing of the different firmware projects available. If you concerned about compatibility, flip your router over, get the version numbers and check the matrix.

LinksysInfo.org是可用的不同固件项目的最佳清单。 如果您担心兼容性，请翻转路由器，获取版本号并检查矩阵。

Linksys released versions 1.0 through 4.0 (I have an unused 1.1 and a 2.0 I'm using) powered by Linux. This little guy is a Linux box! Then, sadly, Linksys released version 5.0 powered by VxWorks and the hacking community was bummed. However, in an unusual turn of actually listening to the customer Linksys released the new WRT54GL with the "L" for Linux.

Linksys发布了由Linux驱动的1.0到4.0版本(我正在使用未使用的1.1和2.0)。 这个小家伙是Linux盒子！ 然后，可悲的是，Linksys发布了由VxWorks提供支持的5.0版，黑客社区也因此陷入困境。 然而，在一次不寻常的聆听客户反馈的过程中，Linksys为Linux发布了带有“ L”字样的新型WRT54GL。

From LinuxElectrons.com: Linksys WRT54GL Features

来自LinuxElectrons.com：Linksys WRT54GL功能

• Linux Kernel 2.4

  Linux内核2.4

• Based on the Broadcom BCM95352E SoC

  基于Broadcom BCM95352E SoC

• Hardware design is the WRT54G Version 4.0

  硬件设计是WRT54G 4.0版

• After market firmware upgrades

  市场固件升级后

• All-in-one Internet-sharing Router, 4-port Switch, and 54Mbps Wireless-G (802.11g) Access Point

  多合一的Internet共享路由器，4端口交换机和54Mbps Wireless-G(802.11g)接入点

• Shares a single Internet connection and other resources with Ethernet wired and Wireless-G and -B devices

  与以太网有线和Wireless-G和-B设备共享单个Internet连接和其他资源

• Push button setup feature makes wireless configuration secure and simple

  按钮设置功能使无线配置安全，简单

• High security: TKIP and AES encryption, wireless MAC address filtering, powerful SPI firewall

  高安全性：TKIP和AES加密，无线MAC地址过滤，强大的SPI防火墙

I've noticed some interesting stuff going on with Sveasoft, my previous firmware, so I started looking for an alternative. Sveasoft hasn't released a new version in a while and I've consistently had trouble VPN'ing back into my house from outsite. Additionally, the wife insists on 100% uptime with Vonage (as she should) so I really need the QoS (Quality of Service) to be solid. If I'm downloading 5 Gigs from MSDN at 800k/s over Comcast, I need her phone calls to NOT be dropped.

我注意到一些有趣的东西与Sveasoft，我以前的固件怎么回事，所以我开始寻找替代方案。 Sveasoft已有一段时间没有发布新版本了，我一直遇到VPN从异地回到我家的麻烦。 此外，妻子坚持要使用Vonage进行100％的正常运行(如她应该的那样)，所以我真的需要QoS(服务质量)来保持稳定。 如果我要通过Comcast从MSDN以800k / s的速度下载5 Gigs，我需要她的电话不被打断。

My options:

我的选择：

• HyperWRT is very well thought of, based on the Linksys 3.03.6 firmware, it adds adjustable transmit power, better QoS and port forwarding as well as command shells, etc. If you want something that is 50% better than the standard firmware you have now and you don't want to compromise stability, this is your firmware.

  HyperWRT是基于Linksys 3.03.6固件而精心设计的，它增加了可调的发射功率，更好的QoS和端口转发以及命令外壳等。 如果您想要的东西比现在的标准固件好50％，并且不想破坏稳定性，那么这就是您的固件。

• Talisman 1.1 is SVEASoft's firmware. There's some GPL drama going on over the last few years though.

  Talisman 1.1是SVEASoft的固件。 不过，过去几年中发生了一些GPL戏剧。

• DD-WRT is a fork of an early SVEASoft build that has now integrated lots of stuff from OpenWRT. I downloaded version v23. It is very actively developed. I heard good things about DD-WRT and eventually settled on it.

  DD-WRT是早期SVEASoft版本的分支，现已集成了OpenWRT的许多功能。 我下载了v23版本。 它是非常积极的发展。 我听到了有关DD-WRT的好消息，并最终选择了它。

Good stuff about DD-WRT:

关于DD-WRT的好东西：

• Includes XBox Live, BitTorrent and Skype in its QoS services priority list.
  在其QoS服务优先级列表中包括XBox Live，BitTorrent和Skype。
• UPnP Forwarding admin screen lets you see what UPnP devices have punched holes through your firewall.
  UPnP转发管理屏幕可让您查看哪些UPnP设备在防火墙上造成了漏洞。
• WRT radius authentication (that I haven't figured out how to work yet)
  WRT半径验证(我还没有弄清楚如何工作)

• Support for updating my DynDNS.org account.

  支持更新我的DynDNS.org帐户。

• Support for Chilispot if I ever choose to charge my neighbors for using my wireless HotSpot.
  如果我选择向邻居收取使用我的无线热点的费用，请支持Chilispot。
• DHCPd support for assigning IP addresses based on MAC addresses (centrally administered static IPs, very important, and very useful)
  DHCPd支持基于MAC地址分配IP地址(集中管理的静态IP，非常重要，非常有用)
• PPTP VPN Server using MS-CHAP means no-install VPN from Hotel Rooms
  使用MS-CHAP的PPTP VPN服务器意味着无需安装酒店客房的VPN

It was easy to setup and I was back in business and Mo was back on the phone in < 20 min. If you do use one of these firmwares, do use Kiwi's SYSLOG and turn on syslogd in the new Firmware, giving the IP address of the machine running Kiwi. This lets you see the router's boot up process and won't leave you staring at the lights (as I used to) wondering if it's coming back up.

设置起来很容易，我又回到了企业，而Mo在不到20分钟的时间内又回到了电话。 如果确实使用这些固件之一，请使用Kiwi的SYSLOG并在新固件中打开syslogd，并提供运行Kiwi的计算机的IP地址。 这样一来，您就可以看到路由器的启动过程，而不会像以前那样盯着指示灯(不知道是否要重新启动)。

Aside: There's even WRT54G firmware dedicated to sharing your bandwidth with other anarchists like-minded people. No one in my town though.

另外：甚至还有WRT54G固件，专用于与志趣相投的其他 无政府主义者 共享您的带宽。 不过我镇上没有人。

翻译自: https://www.hanselman.com/blog/more-on-alternate-linksys-firmware

linksys 打印软件