仿真数据
环境
- Window10 + Matlab2018b
- field II 该工具可模拟产生超声回波数据
仿真数据配置
field II 的配置
从 field II Download下载的压缩包放在安装的Matlab路径的 toolbox下,然后在Matlab中选择"设置路径"将对应的Field路径包含。
探头配置
模拟线阵探头,相关配置如下:
中心频率 | 阵元高度 | 阵元宽度 | 阵元间隙 | 阵元数 | 物理焦点 |
---|---|---|---|---|---|
3MHz | 5mm | 0.513mm | 0.025mm | 192 | [0 0 0.05]mm |
系统采样频率:100MHz
发射孔径:64
相关代码如下:
f0=3e6; % Transducer center frequency [Hz]
fs=100e6; % Sampling frequency [Hz]
c=1540; % Speed of sound [m/s]
lambda=c/f0; % Wave length [m]
width=lambda; % Width of element
element_height=5/1000; % Height of element [m]
kerf=width/20; % Kerf [m]
focus=[0 0 50]/1000; % Fixed focal point [m]
N_elements=192; % Number of elements in the transducer
N_active=64; % Active elements in the transducer
set_sampling(fs); % Set the sampling frequency
发射与接收孔径均设置为线阵,阵元的脉冲响应信号为
加Hanning窗的正弦信号,发射的激励信号为正弦信号,相关代码如下:
% Generate aperture for emission
emit_aperture = xdc_linear_array (N_elements, width, element_height, kerf, 1, 5, focus);
% Set the impulse response and excitation of the emit aperture
impulse_response=sin(2*pi*f0*(0:1/fs:2/f0<