51单片机-TLC5615代码

仅供参考

按照程序中定义的管脚连接   数码管是用PNP三极管驱动共阳数码管     用定时器计数给5615

#include<reg52.h>
#define   uint  unsigned int
#define   uchar unsigned char
uchar table[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e};
sbit LED1=P2^0;
sbit LED2=P2^1;
sbit LED3=P2^2;
sbit LED4=P2^3;
sbit TLC5615_SCLK=P2^4;
sbit TLC5615_CS=P2^5;
sbit TLC5615_DIN=P2^6;
uint num,num1;
void delay(uint k)
{					   
	uint i,j;
	for(i=11;i>0;i--)
		for(j=k;j>0;j--);
}
void display(uint n)				  
{
	LED1=0;
	P0=table[n/1000];
	delay(0);
	P0=0xff;
	LED1=1;	
	  
	LED2=0;
	P0=table[n%1000/100];
	delay(0);
	P0=0xff;
	LED2=1;
		
	LED3=0;
	P0=table[n%100/10];
	delay(0);
	P0=0xff;
	LED3=1;

	LED4=0;
	P0=table[n%10];
	delay(0);
	P0=0xff;
	LED4=1;
} 
void  Write_TLC5615(uint date)
{
    uint i;
	TLC5615_SCLK=0;
	TLC5615_CS=0;
	date<<=6;
	for(i=0;i<12;i++)
	{
		TLC5615_DIN=(bit)(date&0x8000);
		TLC5615_SCLK=1;
		date<<=1;
		TLC5615_SCLK=0;	
		delay(0);		
	}
	TLC5615_CS=1;
	TLC5615_SCLK=0;

} 
void init()
{
	TMOD=0x01; 
	TH0=(65536-458)/256;
	TL0=(65536-458)%256;
	EA=1;
	ET0=1;
	TR0=1;
}
void main()
{
	init();
	while(1)
	{
		Write_TLC5615(num1);
		display(num1);
	}	
}
void T0_Time() interrupt 1
{
	TH0=(65536-4580)/256;
	TL0=(65536-4580)%256;
	num++;
	if(num==512)
	{
		num=0;
		num1++;
		if(num1==1023)
		{
			num1=0;
		}
	}
}