0.96寸 OLED 驱动，HAL库+SPI，集合了网上所有好用的函数，测试过。解决花屏问题。

河湾边的一亩三分地

已于 2023-06-10 12:48:12 修改

阅读量4.4k

点赞数 11

文章标签： stm32 单片机嵌入式硬件

于 2023-06-08 10:00:34 首次发布

本文链接：https://blog.csdn.net/hpy518/article/details/131101278

版权

前了阵子想做OLED做个小东西，没想到翻车了，花了很多时间把坑填上了，现在把问题写出来。用的是SSD1306芯片的7脚SPI OLED屏。

现象：官方程序移植过来后，通电测试时，发现屏幕一直有雪花跳动，手摸DC引脚，屏幕会有部分字符显示正常，判断应该是干扰。SPI的时钟脚和数据脚加上拉电阻也无法解决。后来屏幕用另外的DEMO板加跳线到屏幕，显示正常了。

原因：PCB上覆铜问题，地线上可能有干扰，后来新板子将OLED屏幕的这些数据线周围都不覆铜了，才解决。

因为卡在这里好久，各种程序整了一堆，现将各家好用的代码集合起来，留印。

文件测试好的有oled.c oled.h oledfont.h ，其中bmp.h的未测试。代码都是HAL库，使用的是硬件SPI

oled.h

#ifndef __OLED_H
#define __OLED_H 

#include "main.h"
#include "gpio.h"
#include "stdlib.h"	
#include "spi.h"

//--------------OLED参数定义---------------------
#define PAGE_SIZE    	8
#define XLevelL				0x00
#define XLevelH				0x10
#define YLevel       	0xB0
#define WIDTH 	     	128
#define HEIGHT 	     	64	
//-----------------OLED端口定义---------------- 


#define OLED_RES_Clr() HAL_GPIO_WritePin(OLED_RES_GPIO_Port,OLED_RES_Pin,GPIO_PIN_RESET)//RES
#define OLED_RES_Set() HAL_GPIO_WritePin(OLED_RES_GPIO_Port,OLED_RES_Pin,GPIO_PIN_SET)

#define OLED_DC_Clr() HAL_GPIO_WritePin(OLED_DC_GPIO_Port,OLED_DC_Pin,GPIO_PIN_RESET)//DC
#define OLED_DC_Set() HAL_GPIO_WritePin(OLED_DC_GPIO_Port,OLED_DC_Pin,GPIO_PIN_SET)
 		     
#define OLED_CS_Clr()  HAL_GPIO_WritePin(OLED_CS_GPIO_Port,OLED_CS_Pin,GPIO_PIN_RESET)//CS
#define OLED_CS_Set()  HAL_GPIO_WritePin(OLED_CS_GPIO_Port,OLED_CS_Pin,GPIO_PIN_SET)

#define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据

#define uint8_t 	unsigned char
#define uint32_t 	unsigned int
#define WHICH_SPI &hspi1//根据使用的SPI更改

void OLED_ColorTurn(uint8_t i);
void OLED_DisplayTurn(uint8_t i);
void OLED_WR_Byte(uint8_t dat,uint8_t cmd);
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_DisPlay_On(void);
void OLED_DisPlay_Off(void);
void OLED_Refresh(void);
void OLED_Clear(uint8_t dat);
void OLED_Set_Pixel(unsigned char x, unsigned char y,unsigned char color);
void OLED_DrawLine(unsigned int x1, unsigned int y1, unsigned int x2,unsigned int y2);
void OLED_DrawSquare(uint8_t x1,uint8_t y1,uint8_t x2,uint8_t y2);
void OLED_DrawCircle(uint8_t x,uint8_t y,uint8_t r);
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t Char_Size,uint8_t chr,uint8_t mode);
void OLED_ShowString(uint8_t x,uint8_t y,uint8_t size1,uint8_t *chr);
void OLED_ShowNum01(uint8_t x,uint8_t y,uint8_t size1,uint32_t num,uint8_t len);
void OLED_ShowNum(uint8_t x,uint8_t y,uint8_t size1,uint32_t num,uint8_t len);
void OLED_ShowIntegerNumber(uint8_t x,uint8_t y,uint8_t Char_Size,int num);
void OLED_ShowFloatNumber(uint8_t x,uint8_t y,uint8_t Char_Size,float num);
void OLED_ShowChinese(uint8_t x,uint8_t y,uint8_t hsize,uint8_t *str,uint8_t mode);
void OLED_ScrollDisplay(uint8_t num,uint8_t space);
void OLED_WR_BP(uint8_t x,uint8_t y);
void OLED_ShowPicture(uint8_t x0,uint8_t y0,uint8_t x1,uint8_t y1,uint8_t BMP[]);
void OLED_Init(void);
#endif

oled.c

/********************************************************/
/*   2023/6/7                                                                           
*   STM32 7针 0.96 OLED HAL库显示驱动   
*********************************************************
*   引脚定义：                                         
*   OLED_CS OLED_RES OLED_DC OUTPUT    Output push pull
*********************************************************
*   SPI定义：                                          
*   Mode:Transmit only Master                          
*   Hardware Nss Signal:Disable                        
*   Data Size : 8Bits                                  
*   First Bit : MSB First                              
*   CPOL : Low                                         
*   CPHA : 1 Edge	 
*********************************************************
*   接线：                                             
*   GND ---> GND                                       
*   VCC ---> 3.3V                                      
*   DO  ---> SPI_SCK                                   
*   D1  ---> SPI_MOSI                                  
*   RES ---> OLED_RES                                  
*   DC  ---> OLED_DC                                   
*   CS  ---> OLED_CS                                   
*                                                      
*/                                                     
/********************************************************/
//OLED显存总共分为8页
//每页8行，一行128个像素点
//OLED的显存
//存放格式如下.
//[0]0 1 2 3 ... 127 (0~7)行	   
//[1]0 1 2 3 ... 127 (8~15)行	
//[2]0 1 2 3 ... 127 (16~23)行	
//[3]0 1 2 3 ... 127 (24~31)行	
//[4]0 1 2 3 ... 127 (32~39)行	
//[5]0 1 2 3 ... 127 (40~47)行	
//[6]0 1 2 3 ... 127 (48~55)行	
//[7]0 1 2 3 ... 127 (56~63)行			

#include "OLED\oled.h"
#include "oledfont.h"  	 
//#include "stdlib.h"
#include "string.h"

//uint8_t OLED_GRAM[128][8];
//数组每个bit存储OLED每个像素点的颜色值(1-亮(白色),0-灭(黑色))
//每个数组元素表示1列8个像素点，一共128列
static unsigned char OLED_buffer[128*8] = {0};	
/*******************************************************************
 * @name       :void OLED_Init(void)
 * @date       :2023/6/7
 * @function   :initialise OLED SSD1306 control IC
 * @parameters :None
 * @retvalue   :None
********************************************************************/ 
void OLED_Init(void)
{
	OLED_RES_Set();
	HAL_Delay(100);
	OLED_RES_Clr();
	HAL_Delay(100);
	OLED_RES_Set();
	
	OLED_WR_Byte(0xae,OLED_CMD);//--turn off oled panel"关闭led面板"
	OLED_WR_Byte(0x00,OLED_CMD);//---set low column address设置低列地址
	OLED_WR_Byte(0x10,OLED_CMD);//---set high column address设置高列地址
	OLED_WR_Byte(0x40,OLED_CMD);//--set start line address设置起始地址线 Set Mapping RAM Display Start Line (0x00~0x3F)
	OLED_WR_Byte(0x81,OLED_CMD);//--set contrast control register设置对比度控制寄存器
	OLED_WR_Byte(0xcf,OLED_CMD); // Set SEG Output Current Brightness设置亮度控制寄存器
	OLED_WR_Byte(0xa1,OLED_CMD);//--Set SEG/Column Mapping 0xa0左右反置 0xa1正常
	OLED_WR_Byte(0xc8,OLED_CMD);//Set COM/Row Scan Direction 0xc0上下反置 0xc8正常
	OLED_WR_Byte(0xa6,OLED_CMD);//--set normal display
	OLED_WR_Byte(0xa8,OLED_CMD);//--set multiplex ratio(1 to 64)设置多路复用
	OLED_WR_Byte(0x3f,OLED_CMD);//--1/64 duty
	OLED_WR_Byte(0xd3,OLED_CMD);//-set display offset Shift Mapping RAM Counter设置显示的偏移映射内存计数器 (0x00~0x3F)
	OLED_WR_Byte(0x00,OLED_CMD);//-not offset取消偏移补偿
	OLED_WR_Byte(0xd5,OLED_CMD);//--set display clock divide ratio/oscillator frequency设置显示时钟分频比/振荡器频率
	OLED_WR_Byte(0x80,OLED_CMD);//--set divide ratio, Set Clock as 100 Frames/Sec设置分离比例，时钟设置为100帧/秒
	OLED_WR_Byte(0xd9,OLED_CMD);//--set pre-charge period预充电时间
	OLED_WR_Byte(0xf1,OLED_CMD);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock预充电15钟及放电1时钟
	OLED_WR_Byte(0xda,OLED_CMD);//--set com pins hardware configurationCOM引脚设置硬件配置
	OLED_WR_Byte(0x12,OLED_CMD);
	OLED_WR_Byte(0xdb,OLED_CMD);//--set vcomh设置VCOM电平
	OLED_WR_Byte(0x40,OLED_CMD);//Set VCOM Deselect Level取消设置VCOM电平
	OLED_WR_Byte(0x20,OLED_CMD);//-Set Page Addressing Mode (0x00/0x01/0x02)设置页面寻址模式（0x00 /头/ 0x02）
	OLED_WR_Byte(0x02,OLED_CMD);//
	OLED_WR_Byte(0x8d,OLED_CMD);//--set Charge Pump enable/disable设置电荷泵启用/禁用
	OLED_WR_Byte(0x14,OLED_CMD);//--set(0x10) 设为0x10失能
	OLED_WR_Byte(0xa4,OLED_CMD);// Disable Entire Display On (0xa4/0xa5)禁用整个显示
	OLED_WR_Byte(0xa6,OLED_CMD);// Disable Inverse Display On (0xa6/a7) 禁用反显示
	OLED_WR_Byte(0xaf,OLED_CMD);//--turn on oled panel打开led面板

	OLED_Clear(0);

}


//反显函数
void OLED_ColorTurn(uint8_t i)
{
	if(i==0)
		{
			OLED_WR_Byte(0xA6,OLED_CMD);//正常显示
		}
	if(i==1)
		{
			OLED_WR_Byte(0xA7,OLED_CMD);//反色显示
		}
}

//屏幕旋转180度
void OLED_DisplayTurn(uint8_t i)
{
	if(i==0)
		{
			OLED_WR_Byte(0xC8,OLED_CMD);//正常显示
			OLED_WR_Byte(0xA1,OLED_CMD);
		}
	if(i==1)
		{
			OLED_WR_Byte(0xC0,OLED_CMD);//反转显示
			OLED_WR_Byte(0xA0,OLED_CMD);
		}
}
/*******************************************************************
 * @name       :void OLED_WR_Byte(unsigned dat,unsigned cmd)
 * @date       :2023/6/7
 * @function   :Write a byte of content to the OLED screen
 * @parameters :dat:Content to be written
                cmd:0-write command
								    1-write data
 * @retvalue   :None
********************************************************************/
void OLED_WR_Byte(uint8_t dat,uint8_t cmd)
{	
	uint8_t * data = &dat;		  
	if(cmd)
	  OLED_DC_Set();
	else
	  OLED_DC_Clr();
	OLED_CS_Clr();
	
//	HAL_SPI_Transmit(WHICH_SPI,(uint8_t *)data,1,10); //需根据实际情况修改 
	
	HAL_SPI_Transmit_DMA(WHICH_SPI,(uint8_t *)data,1);
	OLED_CS_Set();
	OLED_DC_Set();   	  
}

/*******************************************************************
 * @name       :void OLED_Set_Pos(unsigned char x, unsigned char y) 
 * @date       :2023/6/7
 * @function   :Set coordinates in the OLED screen
 * @parameters :x:x coordinates
                y:y coordinates
 * @retvalue   :None
********************************************************************/
void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 
	OLED_WR_Byte(0xb0+y,OLED_CMD);
	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
	OLED_WR_Byte((x&0x0f)|0x01,OLED_CMD); 
}   	  

/*******************************************************************
 * @name       :void OLED_Display_On(void) 
 * @date       :2023/6/7
 * @function   :开启OLED显示
 * @parameters :None
 * @retvalue   :None
********************************************************************/ 	 
void OLED_DisPlay_On(void)
{
	OLED_WR_Byte(0x8D,OLED_CMD);//电荷泵使能
	OLED_WR_Byte(0x14,OLED_CMD);//开启电荷泵
	OLED_WR_Byte(0xAF,OLED_CMD);//点亮屏幕
}

/*******************************************************************
 * @name       :void OLED_Display_Off(void)
 * @date       :2023/6/7
 * @function   ：关闭OLED显示
 * @parameters :None
 * @retvalue   :None
********************************************************************/    
void OLED_DisPlay_Off(void)
{
	OLED_WR_Byte(0x8D,OLED_CMD);//电荷泵使能
	OLED_WR_Byte(0x10,OLED_CMD);//关闭电荷泵
	OLED_WR_Byte(0xAE,OLED_CMD);//关闭屏幕
}

/*******************************************************************
 * @name       :void OLED_Display(void)
 * @date       :2023/6/7
 * @function   :更新显存到OLED	
 * @parameters :None
 * @retvalue   :None
********************************************************************/  
void OLED_Refresh(void)
{
	uint8_t i,n;		    
	for(i=0;i<PAGE_SIZE;i++)  
	{  
		OLED_WR_Byte (YLevel+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (XLevelL,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (XLevelH,OLED_CMD);      //设置显示位置—列高地址   
		for(n=0;n<WIDTH;n++)
		{
			OLED_WR_Byte(OLED_buffer[i*WIDTH+n],OLED_DATA); 
		}
	}   //更新显示
}
/*******************************************************************
 * @name       :void OLED_Clear(unsigned dat)  
 * @date       :2023/6/7
 * @function   :清除屏幕显示
 * @parameters :dat:0-Display full black
                    1-Display full white
 * @retvalue   :None
********************************************************************/ 
void OLED_Clear(uint8_t dat)  
{  
	if(dat)
	{
		memset(OLED_buffer,0xff,sizeof(OLED_buffer));
	}
	else
	{
		memset(OLED_buffer,0,sizeof(OLED_buffer));
	}
	OLED_Refresh();//更新显示
}

//画点函数
//void OLED_DrawPoint(uint8_t x,uint8_t y,uint8_t t)
//{
// uint8_t pos,bx,temp=0;    
// // 此OLED的分辨率为128*64，横坐标大于127，纵坐标大于63，则参数非法    
// if(x>127||y>63) return;    
// // 因为此OLED是按页显示，每页8个像素，所以/8用于计算待显示的点在哪页中
// pos=(y)/8;    
// // 一列中有8个像素，所以计算一下待显示的点，在当前列中的第几个点
// bx=y%8;    
// // 移位，让temp的第bx位为1
// temp=1<<(bx);    
// if(t) 
//  OLED_GRAM[x][pos]|=temp;  //第bx位，置1，其他位值不变
// else 
//  OLED_GRAM[x][pos]&=~temp;  //第bx位，置0，其他位值不变
//}

/*******************************************************************
 * @name       :void OLED_Set_Pixel(unsigned char x, unsigned char y,unsigned char color)
 * @date       :2023/6/7
 * @function   :set the value of pixel to RAM
 * @parameters :x:the x coordinates of pixel
                y:the y coordinates of pixel
								color:the color value of the point
								      1-white
											0-black
 * @retvalue   :None
********************************************************************/ 
void OLED_Set_Pixel(unsigned char x, unsigned char y,unsigned char color)
{
	if(color)
	{
		OLED_buffer[(y/PAGE_SIZE)*WIDTH+x]|= (1<<(y%PAGE_SIZE))&0xff;
	}
	else
	{
		OLED_buffer[(y/PAGE_SIZE)*WIDTH+x]&= ~((1<<(y%PAGE_SIZE))&0xff);
	}
}	

/***
	连线函数
	入口参数：
	x1：起点的x坐标；
	y1：起点的y坐标；
	x2：终点的x坐标；
	y2：终点的y坐标；
****/
void OLED_DrawLine(unsigned int x1, unsigned int y1, unsigned int x2,unsigned int y2)
{
		unsigned int t;
		int xerr=0,yerr=0,delta_x,delta_y,distance;
		int incx,incy,uRow,uCol;
		delta_x=x2-x1; //计算坐标增量
		delta_y=y2-y1;
		uRow=x1;
		uCol=y1;
		if(delta_x>0)incx=1; //设置单步方向
		else if(delta_x==0)incx=0;//垂直线
		else {incx=-1;delta_x=-delta_x;}
		if(delta_y>0)incy=1;
		else if(delta_y==0)incy=0;//水平线
		else{incy=-1;delta_y=-delta_y;}
		if( delta_x>delta_y)distance=delta_x; //选取基本增量坐标轴
		else distance=delta_y;
		for(t=0;t<=distance+1;t++ )//画斜线输出 
		{
				OLED_Set_Pixel(uRow,uCol,1);//画点
				xerr+=delta_x ;
				yerr+=delta_y ;
				if(xerr>distance)
				{
					xerr-=distance;
					uRow+=incx;
				}
				if(yerr>distance)
				{
					yerr-=distance;
					uCol+=incy;
				}
		}
}

//画方形;x:0~127 y:0~63
//x1,y1,左上角坐标；x2,y2,右下角坐标
void OLED_DrawSquare(uint8_t x1,uint8_t y1,uint8_t x2,uint8_t y2)
{
	OLED_DrawLine(x1,y1,x2,y1);
	OLED_DrawLine(x1,y2,x2,y2);
	OLED_DrawLine(x1,y1,x1,y2);
	OLED_DrawLine(x2,y1,x2,y2);
}
//x,y:圆心坐标
//r:圆的半径
void OLED_DrawCircle(uint8_t x,uint8_t y,uint8_t r)
{
	int a, b,num;
    a = 0;
    b = r;
    while(2 * b * b >= r * r)      
    {
        OLED_Set_Pixel(x + a, y - b,1);
        OLED_Set_Pixel(x - a, y - b,1);
        OLED_Set_Pixel(x - a, y + b,1);
        OLED_Set_Pixel(x + a, y + b,1);
 
        OLED_Set_Pixel(x + b, y + a,1);
        OLED_Set_Pixel(x + b, y - a,1);
        OLED_Set_Pixel(x - b, y - a,1);
        OLED_Set_Pixel(x - b, y + a,1);
        
        a++;
        num = (a * a + b * b) - r*r;//计算画的点离圆心的距离
        if(num > 0)
        {
            b--;
            a--;
        }
    }
}
//
//
//
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//size:选择字体 12/16/24
//取模方式 逐列式
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t Char_Size,uint8_t chr,uint8_t mode)
{      	
	  unsigned char c=0,i=0,tmp,j=0;	
		c=chr-' ';//得到偏移后的值			
		if(x>WIDTH-1){x=0;y=y+2;}
		if(Char_Size ==16)
		{
			for(i=0;i<16;i++)
			{
			  if(mode)
				{
					tmp = F8X16[c*16+i];
				}
				else
				{
					tmp = ~(F8X16[c*16+i]);
				}
				for(j=0;j<8;j++)
				{
					if(tmp&(0x80>>j))
					{
						OLED_Set_Pixel(x+j, y+i,1);
					}
					else
					{
						OLED_Set_Pixel(x+j, y+i,0);
					}
				}
			}
		}
		else if(Char_Size==8)
		{	
				for(i=0;i<8;i++)
				{
				  if(mode)
					{
						tmp = F6x8[c][i];
					}
					else
					{
						tmp = ~(F6x8[c][i]);
					}
					for(j=0;j<8;j++)
					{
						if(tmp&(0x80>>j))
						{
							OLED_Set_Pixel(x+j, y+i,1);
						}
						else
						{
							OLED_Set_Pixel(x+j, y+i,0);
						}
					}
			}
	}
	else
	{
		return;
	}
}

//显示字符串
//x,y:起点坐标  
//size1:字体大小 
//*chr:字符串起始地址 
void OLED_ShowString(uint8_t x,uint8_t y,uint8_t size1,uint8_t *chr)
{
	while((*chr>=' ')&&(*chr<='~'))//判断是不是非法字符!
	{
		OLED_ShowChar(x,y,size1,*chr,1);
		x+=size1/2;
		if(x>128-size1)  //换行
		{
			x=2;//x=0
			y+=size1;
    }
		chr++;
  }
}

/*****************************************************************************
 * @name       :uint32_t mypow(uint8_t m,uint8_t n)
 * @date       :2018-08-27 
 * @function   :get the nth power of m (internal call)
 * @parameters :m:the multiplier
                n:the power
 * @retvalue   :the nth power of m
******************************************************************************/ 
uint32_t OLED_Pow(uint8_t m,uint8_t n)
{
	uint32_t result=1;	 
	while(n--)result*=m;    
	return result;
}

/*
描述：显示整数
输入：
	x:显示的x起始位置
	y:显示的y起始位置
	num:要显示的数字
	len :数字的位数
	size1:要显示数字的大小
	注意：不足位会以0显示
*/
void OLED_ShowNum01(uint8_t x,uint8_t y,uint8_t size1,uint32_t num,uint8_t len)
{
	uint8_t t,temp;
	for(t=0;t<len;t++)
	{
		temp=(num/OLED_Pow(10,len-t-1))%10;
			if(temp==0)
			{
				OLED_ShowChar(x+(size1/2)*t,y,size1,'0',1);
      }
			else 
			{
			  OLED_ShowChar(x+(size1/2)*t,y,size1,temp+'0',1);
			}
  }
}

///*
//描述：显示整数
//输入：
//	x:显示的x起始位置
//	y:显示的y起始位置
//	num:要显示的数字
//	len :数字的位数
//	size2:要显示数字的大小
//	注意：不足位不显示0
//*/
void OLED_ShowNum(uint8_t x,uint8_t y,uint8_t size1,uint32_t num,uint8_t len)
{
	uint8_t t,temp;
	uint8_t enshow=0;
	for(t=0;t<len;t++)
	{
		temp=(num/OLED_Pow(10,len-t-1))%10;
		if(enshow==0&&t<(len-1))
		{
			if(temp==0)
			{
				OLED_ShowChar(x+(size1/2)*t,y,size1,' ',1);
				continue;
			}else enshow=1; 
		 	 
		}
	 	OLED_ShowChar(x+(size1/2)*t,y,size1,temp+'0',1); 
	}
}

/*
描述：显示整数(可显示正负数)（-65535~65535）
输入：
	x:显示的x起始位置
	y:显示的y起始位置
	num:要显示的数字
	Char_Size:要显示数字的大小
*/
void OLED_ShowIntegerNumber(uint8_t x,uint8_t y,uint8_t Char_Size,int num)
{
	uint8_t len=0;
	int buf=num;
	while(buf)
	{
		len++;
		buf/=10;
	}
	if(num>0)
		OLED_ShowNum(x,y,Char_Size,num,len);
	else
	{
		OLED_ShowChar(x,y,Char_Size,'-',1);
		num=abs(num);
		if(Char_Size==16)
			OLED_ShowNum(x+8,y,Char_Size,num,len);
		else
			OLED_ShowNum(x+6,y,Char_Size,num,len);
	}
}

/*
描述：显示浮点数(可显示正负数)（-65535~65535）
输入：
	x:显示的x起始位置
	y:显示的y起始位置
	num:要显示的数字,默认小数点两位，可修改
	Char_Size:要显示数字的大小
局限：目前只能显示确定范围的小数，且小数部分显示不准确
*/
void OLED_ShowFloatNumber(uint8_t x,uint8_t y,uint8_t Char_Size,float num)
{
	uint8_t zheng_len=0,xiao_len=0,polarity_flag=0;
	int zheng,xiao;		
	if(num>0)
		polarity_flag=1;
	else
	{
		polarity_flag=0;
		num=-num;
	}
	zheng=(int)num;
	xiao=((num-zheng)*100)/1;	//显示小数点后两位
	while(zheng)	//计算整数部分位数
	{
		zheng_len++;
		zheng/=10;
	}
	xiao_len=2;
	zheng=(int)num;	//在计算整数部分数值时，原赋值被篡改，这里重新赋值
	if(polarity_flag)
	{	
		if(Char_Size==16)
		{
			OLED_ShowNum01(x,y,Char_Size,zheng,zheng_len);
			OLED_ShowChar(x+zheng_len*8,y,Char_Size,'.',1);
			OLED_ShowNum01(x+(zheng_len+1)*8,y,Char_Size,xiao,xiao_len);
		}
		else
		{
			OLED_ShowNum01(x,y,Char_Size,zheng,zheng_len);
			OLED_ShowChar(x+zheng_len*6,y,Char_Size,'.',1);
			OLED_ShowNum01(x+(zheng_len+1)*6,y,Char_Size,xiao,xiao_len);
		}
	}
	else
	{
		OLED_ShowChar(x,y,Char_Size,'-',1);
		if(Char_Size==16)
		{
			OLED_ShowNum01(x+8,y,Char_Size,zheng,zheng_len);
			OLED_ShowChar(x+(zheng_len+1)*8,y,Char_Size,'.',1);
			OLED_ShowNum01(x+(zheng_len+2)*8,y,Char_Size,xiao,xiao_len);
		}
		else
		{
			OLED_ShowNum01(x+6,y,Char_Size,zheng,zheng_len);
			OLED_ShowChar(x+(zheng_len+1)*6,y,Char_Size,'.',1);
			OLED_ShowNum01(x+(zheng_len+2)*6,y,Char_Size,xiao,xiao_len);
		}
	}
}

/*****************************************************************************
 * @name       :void GUI_ShowFont16(uint8_t x,uint8_t y,uint8_t *s,uint8_t mode)
 * @date       :2023/6/7 
 * @function   :Display a single 16x16 Chinese character
 * @parameters :x:the bebinning x coordinate of the Chinese character
                y:the bebinning y coordinate of the Chinese character
								s:the start address of the Chinese character
								mode:0-white background and black character
								     1-black background and white character
 * @retvalue   :None
******************************************************************************/ 
void GUI_ShowFont16(uint8_t x,uint8_t y,uint8_t *s,uint8_t mode)
{
	uint8_t i,j,k,tmp;
	uint16_t num;
	num = sizeof(cfont16)/sizeof(typFNT_GB16);
  for(i=0;i<num;i++)
	{
		if((cfont16[i].Index[0]==*s)&&(cfont16[i].Index[1]==*(s+1)))
		{
			for(j=0;j<32;j++)
			{
				if(mode)
				{
					tmp = cfont16[i].Msk[j];
				}
				else
				{
					tmp = ~(cfont16[i].Msk[j]);
				}
				for(k=0;k<8;k++)
				{
					if(tmp&(0x80>>k))
					{
						OLED_Set_Pixel(x+(j%2)*8+k, y+j/2,1);
					}
					else
					{
						OLED_Set_Pixel(x+(j%2)*8+k, y+j/2,0);
					}
				}
			}	
			break;
		}	
	}

}

/*****************************************************************************
 * @name       :void GUI_ShowFont24(uint8_t x,uint8_t y,uint8_t *s,uint8_t mode)
 * @date       :2023/6/7 
 * @function   :Display a single 24x24 Chinese character
 * @parameters :x:the bebinning x coordinate of the Chinese character
                y:the bebinning y coordinate of the Chinese character
								s:the start address of the Chinese character
								mode:0-white background and black character
								     1-black background and white character
 * @retvalue   :None
******************************************************************************/ 
void GUI_ShowFont24(uint8_t x,uint8_t y,uint8_t *s,uint8_t mode)
{
	uint8_t i,j,k,tmp;
	uint16_t num;
	num = sizeof(cfont24)/sizeof(typFNT_GB24);
  for(i=0;i<num;i++)
	{
		if((cfont24[i].Index[0]==*s)&&(cfont24[i].Index[1]==*(s+1)))
		{
			for(j=0;j<72;j++)
			{
				if(mode)
				{
					tmp = cfont24[i].Msk[j];
				}
				else
				{
					tmp = ~(cfont24[i].Msk[j]);
				}
				for(k=0;k<8;k++)
				{
					if(tmp&(0x80>>k))
					{
						OLED_Set_Pixel(x+(j%3)*8+k, y+j/3,1);
					}
					else
					{
						OLED_Set_Pixel(x+(j%3)*8+k, y+j/3,0);
					}
				}
			}	
			break;
		}	
	}

}

/*****************************************************************************
 * @name       :void GUI_ShowFont32(uint8_t x,uint8_t y,uint8_t *s,uint8_t mode)
 * @date       :2023/6/7 
 * @function   :Display a single 32x32 Chinese character
 * @parameters :x:the bebinning x coordinate of the Chinese character
                y:the bebinning y coordinate of the Chinese character
								s:the start address of the Chinese character
								mode:0-white background and black character
								     1-black background and white character
 * @retvalue   :None
******************************************************************************/ 
void GUI_ShowFont32(uint8_t x,uint8_t y,uint8_t *s,uint8_t mode)
{
	uint8_t i,j,k,tmp;
	uint16_t num;
	num = sizeof(cfont32)/sizeof(typFNT_GB32);
  for(i=0;i<num;i++)
	{
		if((cfont32[i].Index[0]==*s)&&(cfont32[i].Index[1]==*(s+1)))
		{
			for(j=0;j<128;j++)
			{
				if(mode)
				{
					tmp = cfont32[i].Msk[j];
				}
				else
				{
					tmp = ~(cfont32[i].Msk[j]);
				}
				for(k=0;k<8;k++)
				{
					if(tmp&(0x80>>k))
					{
						OLED_Set_Pixel(x+(j%4)*8+k, y+j/4,1);
					}
					else
					{
						OLED_Set_Pixel(x+(j%4)*8+k, y+j/4,0);
					}
				}
			}	
			break;
		}	
	}

}
/*
功能：显示汉字
x,y:起点坐标
num:汉字对应的序号
取模软件：PCtoLCD2018
取模方式：阴码，列行式，逆向
*/
void OLED_ShowChinese(uint8_t x,uint8_t y,uint8_t hsize,uint8_t *str,uint8_t mode)
{
	while(*str!='\0')
	{
		if(hsize == 16)
		{
			GUI_ShowFont16(x,y,str,mode);
		}
		else if(hsize == 24)
		{
			GUI_ShowFont24(x,y,str,mode);
		}
		else if(hsize == 32)
		{
			GUI_ShowFont32(x,y,str,mode);
		}
		else
		{
			return;
		}
		x+=hsize;
		if(x>WIDTH-hsize)
		{
			x=0;
			y+=hsize;
		}
		str+=2;
	}			
}


//num 显示汉字的个数
//space 每一遍显示的间隔
//void OLED_ScrollDisplay(uint8_t num,uint8_t space)
//{
//	uint8_t i,n,t=0,m=0,r;
//	while(1)
//	{
//		if(m==0)
//		{
//	    OLED_ShowChinese(128,24,16,t,1); //写入一个汉字保存在OLED_GRAM[][]数组中
//			t++;
//		}
//		if(t==num)
//			{
//				for(r=0;r<16*space;r++)      //显示间隔
//				 {
//					for(i=0;i<144;i++)
//						{
//							for(n=0;n<8;n++)
//							{
//								OLED_GRAM[i-1][n]=OLED_GRAM[i][n];
//							}
//						}
//           OLED_Refresh();
//				 }
//        t=0;
//      }
//		m++;
//		if(m==16){m=0;}
//		for(i=0;i<144;i++)   //实现左移
//		{
//			for(n=0;n<8;n++)
//			{
//				OLED_GRAM[i-1][n]=OLED_GRAM[i][n];
//			}
//		}
//		OLED_Refresh();
//	}
//}



//x0,y0：起点坐标
//x1,y1：终点坐标
//BMP[]：要写入的图片数组
///***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void OLED_ShowPicture(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{ 	
 unsigned int j=0;
 unsigned char x,y;
  
  if(y1%8==0) y=y1/8;      
  else y=y1/8+1;
	for(y=y0;y<y1;y++)
	{
		OLED_Set_Pos(x0,y);
    for(x=x0;x<x1;x++)
	    {      
	    	OLED_WR_Byte(BMP[j++],OLED_DATA);	    	
	    }
	}
}  
//字符串显示
//void OLED_Printf(uint8_t str[])
//{
//OLED_Clear();
//OLED_ShowString(2,2,str,16);  //字号：12/16/24
//OLED_Refresh();
//}

oledfont.h

/****************************************************************************************************
//=========================================电源接线================================================//
// OLED模块               STM32单片机
//   VCC         接       DC 5V/3.3V      //OLED屏电源正
//   GND         接          GND          //OLED屏电源地
//=======================================液晶屏数据线接线==========================================//
//本模块默认数据总线类型为4线制SPI
// OLED模块               STM32单片机
//   D1          接          PB15        //OLED屏SPI写信号
//=======================================液晶屏控制线接线==========================================//
// OLED模块               STM32单片机
//   CS          接          PB11        //OLED屏片选控制信号
//   RES         接          PB12        //OLED屏复位控制信号
//   DC          接          PB10        //OLED屏数据/命令选择控制信号
//   D0          接          PB13        //OLED屏SPI时钟信号
//=========================================触摸屏接线=========================================//
//本模块不带触摸功能，所以不需要触摸屏接线
****************************************************************************************************/	
/*取模软件：PCtoLCD2018
	设置:阴码，逐行式，顺向（高位在前）
*/
/***************************************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, QD electronic SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
****************************************************************************************************/	
#ifndef __OLEDFONT_H
#define __OLEDFONT_H 

#include "main.h"

//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:6*8
//逐行式，顺向（高位在前）
/************************************6*8的点阵************************************/
 unsigned char F6x8[][8] =		
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // sp
	0x10,0x10,0x10,0x10,0x00,0x10,0x00,0x00, // !
	0x28,0x28,0x28,0x00,0x00,0x00,0x00,0x00, // "
	0x28,0x28,0x7C,0x28,0x7C,0x28,0x28,0x00, // #
	0x10,0x3C,0x50,0x38,0x14,0x78,0x10,0x00, // $
	0x00,0x4C,0x2C,0x10,0x08,0x60,0x60,0x00, // %
	0x30,0x48,0x50,0x20,0x54,0x48,0x34,0x00, // &
	0x30,0x10,0x20,0x00,0x00,0x00,0x00,0x00, // '
	0x08,0x10,0x20,0x20,0x20,0x10,0x08,0x00, // (
	0x20,0x10,0x08,0x08,0x08,0x10,0x20,0x00, // )
	0x00,0x10,0x54,0x38,0x54,0x10,0x00,0x00, // *
	0x00,0x10,0x10,0x7C,0x10,0x10,0x00,0x00, // +
	0x00,0x00,0x00,0x00,0x00,0x18,0x08,0x10, // ,
	0x00,0x00,0x00,0x00,0x7C,0x00,0x00,0x00, // -
	0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00, // .
	0x00,0x04,0x08,0x10,0x20,0x40,0x00,0x00, // /
	0x38,0x44,0x4C,0x54,0x64,0x44,0x38,0x00, // 0
	0x10,0x30,0x10,0x10,0x10,0x10,0x38,0x00, // 1
	0x38,0x44,0x04,0x08,0x10,0x20,0x7C,0x00, // 2
	0x7C,0x08,0x10,0x08,0x04,0x44,0x38,0x00, // 3 
	0x08,0x18,0x28,0x48,0x7C,0x08,0x08,0x00, // 4
	0x7C,0x40,0x78,0x04,0x04,0x44,0x38,0x00, // 5
	0x18,0x20,0x40,0x78,0x44,0x44,0x38,0x00, // 6
	0x7C,0x04,0x08,0x10,0x20,0x20,0x20,0x00, // 7
	0x38,0x44,0x44,0x38,0x44,0x44,0x38,0x00, // 8
	0x38,0x44,0x44,0x3C,0x04,0x08,0x30,0x00, // 9
	0x00,0x30,0x30,0x00,0x30,0x30,0x00,0x00, // :
	0x00,0x30,0x30,0x00,0x30,0x10,0x20,0x00, // ;
	0x08,0x10,0x20,0x40,0x20,0x10,0x08,0x00, // <
	0x00,0x00,0x7C,0x00,0x7C,0x00,0x00,0x00, // =
	0x20,0x10,0x08,0x04,0x08,0x10,0x20,0x00, // >
	0x38,0x44,0x04,0x08,0x10,0x00,0x10,0x00, // ?
	0x38,0x44,0x04,0x34,0x5C,0x44,0x38,0x00, // @
	0x10,0x28,0x44,0x44,0x7C,0x44,0x44,0x00, // A
	0x78,0x44,0x44,0x78,0x44,0x44,0x78,0x00, // B
	0x38,0x44,0x40,0x40,0x40,0x44,0x38,0x00, // C
	0x70,0x48,0x44,0x44,0x44,0x48,0x70,0x00, // D
	0x7C,0x40,0x40,0x78,0x40,0x40,0x7C,0x00, // E
	0x7C,0x40,0x40,0x78,0x40,0x40,0x40,0x00, // F
	0x38,0x44,0x40,0x5C,0x44,0x44,0x3C,0x00, // G
	0x44,0x44,0x44,0x7C,0x44,0x44,0x44,0x00, // H
	0x38,0x10,0x10,0x10,0x10,0x10,0x38,0x00, // I
	0x1C,0x08,0x08,0x08,0x08,0x48,0x30,0x00, // J
	0x44,0x48,0x50,0x60,0x50,0x48,0x44,0x00, // K
	0x40,0x40,0x40,0x40,0x40,0x40,0x7C,0x00, // L
	0x44,0x6C,0x54,0x54,0x44,0x44,0x44,0x00, // M
	0x44,0x44,0x64,0x54,0x4C,0x44,0x44,0x00, // N
	0x38,0x44,0x44,0x44,0x44,0x44,0x38,0x00, // O
	0x78,0x44,0x44,0x78,0x40,0x40,0x40,0x00, // P
	0x38,0x44,0x44,0x44,0x54,0x48,0x34,0x00, // Q
	0x78,0x44,0x44,0x78,0x50,0x48,0x44,0x00, // R
	0x3C,0x40,0x40,0x38,0x04,0x04,0x78,0x00, // S
	0x7C,0x10,0x10,0x10,0x10,0x10,0x10,0x00, // T
	0x44,0x44,0x44,0x44,0x44,0x44,0x38,0x00, // U
	0x44,0x44,0x44,0x44,0x44,0x28,0x10,0x00, // V
	0x44,0x44,0x44,0x54,0x54,0x54,0x28,0x00, // W
	0x44,0x44,0x28,0x10,0x28,0x44,0x44,0x00, // X
	0x44,0x44,0x44,0x28,0x10,0x10,0x10,0x00, // Y
	0x7C,0x04,0x08,0x10,0x20,0x40,0x7C,0x00, // Z
	0x38,0x20,0x20,0x20,0x20,0x20,0x38,0x00, // [
	0x00,0x40,0x20,0x10,0x08,0x04,0x00,0x00, // '\'
	0x38,0x08,0x08,0x08,0x08,0x08,0x38,0x00, // ]
	0x10,0x28,0x44,0x00,0x00,0x00,0x00,0x00, // ^
	0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x00, // _
	0x20,0x10,0x08,0x00,0x00,0x00,0x00,0x00, // '
	0x00,0x00,0x38,0x04,0x3C,0x44,0x3C,0x00, // a
	0x40,0x40,0x58,0x64,0x44,0x44,0x78,0x00, // b
	0x00,0x00,0x38,0x40,0x40,0x44,0x38,0x00, // c
	0x04,0x04,0x34,0x4C,0x44,0x44,0x3C,0x00, // d
	0x00,0x00,0x38,0x44,0x7C,0x40,0x38,0x00, // e
	0x38,0x24,0x20,0x70,0x20,0x20,0x20,0x00, // f
	0x00,0x00,0x3C,0x44,0x44,0x3C,0x04,0x38, // g
	0x40,0x40,0x58,0x64,0x44,0x44,0x44,0x00, // h
	0x10,0x00,0x30,0x10,0x10,0x10,0x38,0x00, // i
	0x08,0x00,0x18,0x08,0x08,0x08,0x48,0x30, // j
	0x40,0x40,0x48,0x50,0x60,0x50,0x48,0x00, // k
	0x30,0x10,0x10,0x10,0x10,0x10,0x38,0x00, // l
	0x00,0x00,0x68,0x54,0x54,0x44,0x44,0x00, // m
	0x00,0x00,0x58,0x64,0x44,0x44,0x44,0x00, // n
	0x00,0x00,0x38,0x44,0x44,0x44,0x38,0x00, // o
	0x00,0x00,0x58,0x64,0x64,0x58,0x40,0x40, // p
	0x00,0x00,0x34,0x4C,0x4C,0x34,0x04,0x04, // q
	0x00,0x00,0x58,0x64,0x40,0x40,0x40,0x00, // r
	0x00,0x00,0x3C,0x40,0x38,0x04,0x78,0x00, // s
	0x20,0x20,0x70,0x20,0x20,0x24,0x18,0x00, // t
	0x00,0x00,0x44,0x44,0x44,0x4C,0x34,0x00, // u
	0x00,0x00,0x44,0x44,0x44,0x28,0x10,0x00, // v
	0x00,0x00,0x44,0x44,0x54,0x54,0x28,0x00, // w
	0x00,0x00,0x44,0x28,0x10,0x28,0x44,0x00, // x
	0x00,0x00,0x44,0x44,0x44,0x3C,0x04,0x38, // y
	0x00,0x00,0x7C,0x08,0x10,0x20,0x7C,0x00, // z
	0x10,0x20,0x20,0x40,0x20,0x20,0x10,0x00, // {
	0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x00, // |
	0x20,0x10,0x10,0x08,0x10,0x10,0x20,0x00, // }
	0x00,0x00,0x00,0x20,0x54,0x08,0x00,0x00, // ~
};

//常用ASCII表
//偏移量32
//ASCII字符集
//偏移量32
//大小:8*16
//逐行式，顺向（高位在前）
/****************************************8*16的点阵************************************/
 unsigned char F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x18,0x18,0x00,0x00,//! 1
  0x00,0x12,0x36,0x24,0x48,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x00,0x00,0x00,0x24,0x24,0x24,0xFE,0x48,0x48,0x48,0xFE,0x48,0x48,0x48,0x00,0x00,//# 3
  0x00,0x00,0x10,0x38,0x54,0x54,0x50,0x30,0x1C,0x14,0x14,0x54,0x54,0x38,0x10,0x10,//$ 4
  0x00,0x00,0x00,0x44,0xA4,0xA8,0xA8,0xA8,0x54,0x1A,0x2A,0x2A,0x2A,0x44,0x00,0x00,//% 5
  0x00,0x00,0x00,0x30,0x48,0x48,0x48,0x50,0x6E,0xA4,0x94,0x88,0x89,0x76,0x00,0x00,//& 6
  0x00,0x60,0x60,0x20,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x02,0x04,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x08,0x08,0x04,0x02,0x00,//( 8
  0x00,0x40,0x20,0x10,0x10,0x08,0x08,0x08,0x08,0x08,0x08,0x10,0x10,0x20,0x40,0x00,//) 9
  0x00,0x00,0x00,0x00,0x10,0x10,0xD6,0x38,0x38,0xD6,0x10,0x10,0x00,0x00,0x00,0x00,//* 10
  0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x10,0xFE,0x10,0x10,0x10,0x10,0x00,0x00,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x20,0xC0,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00,//. 14
  0x00,0x00,0x01,0x02,0x02,0x04,0x04,0x08,0x08,0x10,0x10,0x20,0x20,0x40,0x40,0x00,/// 15
  0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00,//0 16
  0x00,0x00,0x00,0x10,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//1 17
  0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x04,0x04,0x08,0x10,0x20,0x42,0x7E,0x00,0x00,//2 18
  0x00,0x00,0x00,0x3C,0x42,0x42,0x04,0x18,0x04,0x02,0x02,0x42,0x44,0x38,0x00,0x00,//3 19
  0x00,0x00,0x00,0x04,0x0C,0x14,0x24,0x24,0x44,0x44,0x7E,0x04,0x04,0x1E,0x00,0x00,//4 20
  0x00,0x00,0x00,0x7E,0x40,0x40,0x40,0x58,0x64,0x02,0x02,0x42,0x44,0x38,0x00,0x00,//5 21
  0x00,0x00,0x00,0x1C,0x24,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x24,0x18,0x00,0x00,//6 22
  0x00,0x00,0x00,0x7E,0x42,0x44,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,//7 23
  0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00,//8 24
  0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x26,0x1A,0x02,0x02,0x24,0x38,0x00,0x00,//9 25
  0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,//: 26
  0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x08,0x30,0x00,//; 27
  0x00,0x00,0x00,0x02,0x04,0x08,0x10,0x20,0x40,0x20,0x10,0x08,0x04,0x02,0x00,0x00,//< 28
  0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,//= 29
  0x00,0x00,0x00,0x40,0x20,0x10,0x08,0x04,0x02,0x04,0x08,0x10,0x20,0x40,0x00,0x00,//> 30
  0x00,0x00,0x00,0x3C,0x42,0x42,0x62,0x02,0x04,0x08,0x08,0x00,0x18,0x18,0x00,0x00,//? 31
  0x00,0x00,0x00,0x38,0x44,0x5A,0xAA,0xAA,0xAA,0xAA,0xB4,0x42,0x44,0x38,0x00,0x00,//@ 32
  0x00,0x00,0x00,0x10,0x10,0x18,0x28,0x28,0x24,0x3C,0x44,0x42,0x42,0xE7,0x00,0x00,//A 33
  0x00,0x00,0x00,0xF8,0x44,0x44,0x44,0x78,0x44,0x42,0x42,0x42,0x44,0xF8,0x00,0x00,//B 34
  0x00,0x00,0x00,0x3E,0x42,0x42,0x80,0x80,0x80,0x80,0x80,0x42,0x44,0x38,0x00,0x00,//C 35
  0x00,0x00,0x00,0xF8,0x44,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x44,0xF8,0x00,0x00,//D 36
  0x00,0x00,0x00,0xFE,0x42,0x48,0x48,0x78,0x48,0x48,0x40,0x42,0x42,0xFE,0x00,0x00,//E 37
  0x00,0x00,0x00,0xFE,0x42,0x48,0x48,0x78,0x48,0x48,0x40,0x40,0x40,0xE0,0x00,0x00,//F 38
  0x00,0x00,0x00,0x3C,0x44,0x44,0x80,0x80,0x80,0x8E,0x84,0x44,0x44,0x38,0x00,0x00,//G 39
  0x00,0x00,0x00,0xE7,0x42,0x42,0x42,0x42,0x7E,0x42,0x42,0x42,0x42,0xE7,0x00,0x00,//H 40
  0x00,0x00,0x00,0x7C,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//I 41
  0x00,0x00,0x00,0x3E,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x88,0xF0,//J 42
  0x00,0x00,0x00,0xEE,0x44,0x48,0x50,0x70,0x50,0x48,0x48,0x44,0x44,0xEE,0x00,0x00,//K 43
  0x00,0x00,0x00,0xE0,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x42,0xFE,0x00,0x00,//L 44
  0x00,0x00,0x00,0xEE,0x6C,0x6C,0x6C,0x6C,0x54,0x54,0x54,0x54,0x54,0xD6,0x00,0x00,//M 45
  0x00,0x00,0x00,0xC7,0x62,0x62,0x52,0x52,0x4A,0x4A,0x4A,0x46,0x46,0xE2,0x00,0x00,//N 46
  0x00,0x00,0x00,0x38,0x44,0x82,0x82,0x82,0x82,0x82,0x82,0x82,0x44,0x38,0x00,0x00,//O 47
  0x00,0x00,0x00,0xFC,0x42,0x42,0x42,0x42,0x7C,0x40,0x40,0x40,0x40,0xE0,0x00,0x00,//P 48
  0x00,0x00,0x00,0x38,0x44,0x82,0x82,0x82,0x82,0x82,0xB2,0xCA,0x4C,0x38,0x06,0x00,//Q 49
  0x00,0x00,0x00,0xF8,0x44,0x44,0x44,0x78,0x48,0x48,0x44,0x44,0x42,0xE3,0x00,0x00,//R 50
  0x00,0x00,0x00,0x3E,0x42,0x42,0x40,0x20,0x18,0x04,0x02,0x42,0x42,0x7C,0x00,0x00,//S 51
  0x00,0x00,0x00,0xFE,0x92,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x38,0x00,0x00,//T 52
  0x00,0x00,0x00,0xE7,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00,//U 53
  0x00,0x00,0x00,0xE7,0x42,0x42,0x44,0x24,0x24,0x28,0x28,0x18,0x10,0x10,0x00,0x00,//V 54
  0x00,0x00,0x00,0xD6,0x92,0x92,0x92,0x92,0xAA,0xAA,0x6C,0x44,0x44,0x44,0x00,0x00,//W 55
  0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x18,0x18,0x18,0x24,0x24,0x42,0xE7,0x00,0x00,//X 56
  0x00,0x00,0x00,0xEE,0x44,0x44,0x28,0x28,0x10,0x10,0x10,0x10,0x10,0x38,0x00,0x00,//Y 57
  0x00,0x00,0x00,0x7E,0x84,0x04,0x08,0x08,0x10,0x20,0x20,0x42,0x42,0xFC,0x00,0x00,//Z 58
  0x00,0x1E,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1E,0x00,//[ 59
  0x00,0x00,0x40,0x40,0x20,0x20,0x10,0x10,0x08,0x04,0x04,0x02,0x02,0x02,0x01,0x01,//\ 60
  0x00,0x78,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x78,0x00,//] 61
  0x00,0x08,0x14,0x22,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,//_ 63
  0x00,0x60,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x1E,0x22,0x42,0x42,0x3F,0x00,0x00,//a 65
  0x00,0x00,0x00,0xC0,0x40,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x64,0x58,0x00,0x00,//b 66
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x22,0x40,0x40,0x40,0x22,0x1C,0x00,0x00,//c 67
  0x00,0x00,0x00,0x06,0x02,0x02,0x02,0x1E,0x22,0x42,0x42,0x42,0x26,0x1B,0x00,0x00,//d 68
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x7E,0x40,0x40,0x42,0x3C,0x00,0x00,//e 69
  0x00,0x00,0x00,0x0F,0x11,0x10,0x10,0x7E,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//f 70
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0x44,0x44,0x38,0x40,0x3C,0x42,0x42,0x3C,//g 71
  0x00,0x00,0x00,0xC0,0x40,0x40,0x40,0x5C,0x62,0x42,0x42,0x42,0x42,0xE7,0x00,0x00,//h 72
  0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x70,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//i 73
  0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x1C,0x04,0x04,0x04,0x04,0x04,0x04,0x44,0x78,//j 74
  0x00,0x00,0x00,0xC0,0x40,0x40,0x40,0x4E,0x48,0x50,0x68,0x48,0x44,0xEE,0x00,0x00,//k 75
  0x00,0x00,0x00,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,//l 76
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF6,0x49,0x49,0x49,0x49,0x49,0xED,0x00,0x00,//m 77
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x62,0x42,0x42,0x42,0x42,0xE7,0x00,0x00,//n 78
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00,//o 79
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xD8,0x64,0x42,0x42,0x42,0x64,0x58,0x40,0xE0,//p 80
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1E,0x22,0x42,0x42,0x42,0x26,0x1A,0x02,0x07,//q 81
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xEE,0x32,0x20,0x20,0x20,0x20,0xF8,0x00,0x00,//r 82
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0x42,0x40,0x3C,0x02,0x42,0x7C,0x00,0x00,//s 83
  0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x7C,0x10,0x10,0x10,0x10,0x10,0x0C,0x00,0x00,//t 84
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC6,0x42,0x42,0x42,0x42,0x46,0x3B,0x00,0x00,//u 85
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x28,0x10,0x10,0x00,0x00,//v 86
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xD7,0x92,0x92,0xAA,0xAA,0x44,0x44,0x00,0x00,//w 87
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x6E,0x24,0x18,0x18,0x18,0x24,0x76,0x00,0x00,//x 88
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x28,0x18,0x10,0x10,0xE0,//y 89
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7E,0x44,0x08,0x10,0x10,0x22,0x7E,0x00,0x00,//z 90
  0x00,0x03,0x04,0x04,0x04,0x04,0x04,0x08,0x04,0x04,0x04,0x04,0x04,0x04,0x03,0x00,//{ 91
  0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,//| 92
  0x00,0x60,0x10,0x10,0x10,0x10,0x10,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x60,0x00,//} 93
  0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x52,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

typedef struct 
{
	unsigned char Index[2];	
	char Msk[32];
}typFNT_GB16; 

//宋体
//16*16大小
//阴码，逐行式，顺向（高位在前）
const typFNT_GB16 cfont16[] = 
{
	
	"楷",0x00,0x00,0x00,0x00,0x08,0x20,0x09,0x28,0x09,0x70,0x0D,0xA0,0x79,0xE4,0x09,0x1C,
	0x1C,0x40,0x28,0xB0,0x49,0x58,0x09,0xE8,0x09,0x08,0x09,0xF8,0x00,0x10,0x00,0x00,/*"楷",0*/
	"体",0x00,0x00,0x00,0x80,0x04,0x40,0x0C,0x40,0x08,0x40,0x10,0xF8,0x11,0xC0,0x28,0xE0,
	0x49,0x50,0x0A,0x48,0x0C,0x6C,0x08,0xC0,0x10,0x40,0x00,0x40,0x00,0x00,0x00,0x00,/*"体",1*/
	"测",0x00,0x00,0x00,0x00,0x00,0x04,0x17,0xC4,0x04,0x84,0x05,0x94,0x25,0xA4,0x25,0xA4,
	0x15,0xA4,0x26,0x84,0x23,0x04,0x22,0xC4,0x04,0x54,0x00,0x0C,0x00,0x00,0x00,0x00,/*"测",2*/
	"试",0x00,0x00,0x00,0x00,0x00,0x40,0x0C,0x58,0x00,0x48,0x00,0x40,0x00,0x60,0x78,0xC0,
	0x10,0x20,0x13,0xE0,0x11,0x10,0x15,0x52,0x1F,0x8A,0x00,0x06,0x00,0x02,0x00,0x00,/*"试",3*/
         	 
};

typedef struct 
{
	unsigned char Index[2];	
	
	char Msk[72];
}typFNT_GB24; 


//宋体
//24*24大小
//逐行式，顺向（高位在前）
const typFNT_GB24 cfont24[] = 
{
	"宋",0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x18,0x00,0x00,0x18,0x00,0x00,0x08,0x08,0x0F,
	0xFF,0xFC,0x10,0x00,0x08,0x30,0x10,0x10,0x30,0x18,0x00,0x00,0x18,0x00,0x00,0x18,
	0x08,0x3F,0xFF,0xFC,0x00,0x3C,0x00,0x00,0x7A,0x00,0x00,0x5A,0x00,0x00,0xD9,0x00,
	0x01,0x98,0x80,0x03,0x18,0xC0,0x06,0x18,0x30,0x0C,0x18,0x1E,0x10,0x18,0x08,0x60,
	0x18,0x00,0x00,0x10,0x00,0x00,0x00,0x00,/*"宋",0*/
	"体",0x00,0x00,0x00,0x02,0x02,0x00,0x03,0x03,0x00,0x02,0x02,0x00,0x06,0x02,0x00,0x04,
	0x02,0x00,0x04,0xFF,0xFC,0x08,0x06,0x80,0x0E,0x0E,0x80,0x14,0x0A,0x80,0x14,0x0A,
	0x40,0x24,0x12,0x40,0x44,0x12,0x60,0x04,0x22,0x20,0x04,0x62,0x30,0x04,0x42,0x18,
	0x04,0x82,0x2C,0x05,0x7F,0xFC,0x06,0x02,0x00,0x04,0x02,0x00,0x04,0x02,0x00,0x04,
	0x02,0x00,0x04,0x02,0x00,0x00,0x00,0x00,/*"体",1*/
	"测",0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x09,0xFE,0x08,0x0D,0x86,0x08,0x01,
	0x86,0x08,0x01,0xB6,0x68,0x41,0xB6,0x48,0x33,0xB6,0x48,0x13,0xB6,0x48,0x13,0xB6,
	0x48,0x05,0xB6,0x48,0x05,0xB6,0x48,0x05,0xB6,0x48,0x09,0xA6,0x48,0x09,0xA6,0x48,
	0x39,0xA4,0x48,0x19,0x60,0x08,0x18,0x58,0x08,0x18,0xC4,0x08,0x18,0x86,0x08,0x1B,
	0x02,0x38,0x04,0x00,0x18,0x00,0x00,0x00,/*"测",2*/
	"试",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x10,0x01,0xF0,0x08,0x00,0x98,0x0C,
	0x00,0x88,0x04,0x00,0x84,0x04,0xFF,0xFE,0x00,0x00,0x80,0x00,0x00,0x80,0x7E,0x02,
	0x80,0x04,0xFF,0x80,0x04,0x08,0x80,0x04,0x08,0xC0,0x04,0x08,0x40,0x04,0x08,0x40,
	0x04,0x48,0x60,0x04,0x89,0x22,0x05,0x0E,0x32,0x06,0x70,0x12,0x0E,0x40,0x1C,0x04,
	0x00,0x0E,0x00,0x00,0x02,0x00,0x00,0x00,/*"试",3*/
};

typedef struct 
{
       unsigned char Index[2];	
       char Msk[128];
}typFNT_GB32; 

//宋体
//32*32大小
//逐行式，顺向（高位在前）
const typFNT_GB32 cfont32[] = 
{
	"洪",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,
	0x00,0x00,0x0E,0x00,0x00,0x00,0x0E,0x00,0x00,0x00,0x0E,0x00,0x03,0x80,0x0C,0x00,
	0x03,0xC7,0x0C,0x00,0x00,0xC3,0x0C,0x00,0x00,0x03,0x0C,0x00,0x00,0x03,0x0F,0xC0,
	0x00,0x03,0xFF,0x80,0x18,0x1F,0xEC,0x00,0x0C,0x0B,0x08,0x00,0x0E,0x03,0x08,0x00,
	0x04,0x03,0x08,0x00,0x01,0x03,0x0F,0xF8,0x01,0x03,0xFF,0xF0,0x01,0x7F,0x80,0x00,
	0x02,0x32,0x00,0x00,0x02,0x03,0x08,0x00,0x06,0x07,0x0E,0x00,0x0C,0x0E,0x07,0x00,
	0x1C,0x0C,0x03,0x80,0x1C,0x18,0x03,0x80,0x0C,0x20,0x01,0x80,0x00,0xC0,0x00,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"洪",0*/
	"云",0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x03,0xFC,0x00,
	0x00,0x3F,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,0x00,0x7F,0xFC,0x00,0x7F,0xE0,0x00,
	0x1F,0xF6,0x00,0x00,0x0C,0x07,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x0C,0x00,0x00,
	0x00,0x18,0x10,0x00,0x00,0x30,0x0C,0x00,0x00,0x30,0x0E,0x00,0x00,0x60,0x3F,0x00,
	0x00,0xDF,0xC3,0x80,0x01,0xFC,0x03,0x80,0x03,0xC0,0x01,0x80,0x01,0x00,0x00,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"云",1*/
};

#endif

bmp.h

#ifndef __BMP_H
#define __BMP_H

/*
取模方式
软件：Pctolcd
设置：阴码
			列行式
			逆向

*/
unsigned char BMP1[] =
{
	
0x00,0x03,0x05,0x09,0x11,0xFF,0x11,0x89,0x05,0xC3,0x00,0xE0,0x00,0xF0,0x00,0xF8,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x44,0x28,0xFF,0x11,0xAA,0x44,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x83,0x01,0x38,0x44,0x82,0x92,
	0x92,0x74,0x01,0x83,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x44,0xFF,0x01,0x7D,
	0x7D,0x7D,0x01,0x7D,0x7D,0x7D,0x7D,0x01,0x7D,0x7D,0x7D,0x7D,0x7D,0x01,0xFF,0x00,
	0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,
	0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x3F,0x03,0x03,
	0xF3,0x13,0x11,0x11,0x11,0x11,0x11,0x11,0x01,0xF1,0x11,0x61,0x81,0x01,0x01,0x01,
	0x81,0x61,0x11,0xF1,0x01,0x01,0x01,0x01,0x41,0x41,0xF1,0x01,0x01,0x01,0x01,0x01,
	0xC1,0x21,0x11,0x11,0x11,0x11,0x21,0xC1,0x01,0x01,0x01,0x01,0x41,0x41,0xF1,0x01,
	0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x11,0x11,0x11,0x11,0x11,0xD3,0x33,
	0x03,0x03,0x3F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xE0,0x00,0x00,
	0x7F,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x7F,0x00,0x00,0x01,0x06,0x18,0x06,
	0x01,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x40,0x40,0x7F,0x40,0x40,0x00,0x00,0x00,
	0x1F,0x20,0x40,0x40,0x40,0x40,0x20,0x1F,0x00,0x00,0x00,0x00,0x40,0x40,0x7F,0x40,
	0x40,0x00,0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x00,0x40,0x30,0x0C,0x03,0x00,0x00,
	0x00,0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x07,0x06,0x06,
	0x06,0x06,0x04,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,0x04,0x84,0x44,0x44,0x44,
	0x84,0x04,0x04,0x04,0x84,0xC4,0x04,0x04,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,
	0x04,0x04,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,0x04,0x04,0x04,0x04,0x84,0x44,
	0x44,0x44,0x84,0x04,0x04,0x84,0x44,0x44,0x44,0x84,0x04,0x04,0x04,0x04,0x06,0x06,
	0x06,0x06,0x07,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x10,0x18,0x14,0x12,0x11,0x00,0x00,0x0F,0x10,0x10,0x10,
	0x0F,0x00,0x00,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,0x08,0x10,0x12,0x12,0x0D,0x00,
	0x00,0x18,0x00,0x00,0x0D,0x12,0x12,0x12,0x0D,0x00,0x00,0x18,0x00,0x00,0x10,0x18,
	0x14,0x12,0x11,0x00,0x00,0x10,0x18,0x14,0x12,0x11,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,
	0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x7F,0x03,0x0C,0x30,0x0C,0x03,0x7F,0x00,0x00,0x38,0x54,0x54,0x58,0x00,0x00,
	0x7C,0x04,0x04,0x78,0x00,0x00,0x3C,0x40,0x40,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xAA,0xAA,0xAA,
	0x28,0x08,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x03,0x0C,0x30,0x0C,0x03,0x7F,
	0x00,0x00,0x26,0x49,0x49,0x49,0x32,0x00,0x00,0x7F,0x02,0x04,0x08,0x10,0x7F,0x00,/********************************/
};

unsigned char BMP2[] =
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xE0,0xE0,0xF0,0xF8,
0xF8,0xF8,0xFC,0xFC,0xFC,0xFC,0xFC,0xFC,0xFC,0xFC,0xF8,0xF8,0xF0,0xF0,0xE0,0xE0,
0xC0,0x80,0x00,0x00,0x80,0xC0,0xE0,0xE0,0xF0,0xF8,0xF8,0xF8,0xFC,0xFC,0xFC,0xFC,
0xFC,0xFC,0xFC,0xFC,0xFC,0xFC,0xF8,0xF0,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,
0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x3E,0x8E,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC7,
0xFF,0xFF,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x0F,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x63,
0x6F,0x7F,0x7F,0xBF,0xFF,0xFF,0xDF,0xEF,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,0xBF,0xBF,
0xBF,0xBF,0x7F,0xFF,0x3F,0xF8,0xFF,0xFF,0xFF,0xFE,0x1F,0xFF,0xFF,0xFF,0xBF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xEF,0xF7,0x7F,0x17,0x0F,
0x1B,0x30,0x30,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x60,
0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x0F,0x1F,0x3F,
0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFC,0x3F,0x7F,0xE3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,0x1F,
0x0F,0x07,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x03,0x07,0x0F,0x1F,0x3F,
0x3F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x7C,0x3F,0x3F,0x1F,0x0F,0x07,
0x03,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x03,0x03,0x01,0x01,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"C:\Users\Administrator\Desktop\01.bmp",0*/

	
};

#endif

main.c里

//OLED屏
#include "OLED\oled.h"