C:\>c:\ti\ccsv7\ccs_base\common\uscif\dbgjtag.exe
The utility build date was 'Jul 21 2017'.
The utility build time was '19:39:14'.
The utility package version is '7.0.48.0'.
The utility component version is '35.35.0.0'.
The brief help for each major option is its help command, [-X help].
The [-X] and [-f] options are for debug probe selection.
The [-Y], [-r], [-s] and [-v] options are for configuration.
The [-S] option is for scan-path data and instruction tests.
The [-R] option is for scan-path route and matrix tests.
The [-F] option is for scan-path frequency selection.
The [-G] option is for scan-path frequency testing.
The [-A] option is for scan-path device analysis.
The [-T] option is for debug probe tests.
The [-U] option is for cable and pod tests.
The [-D] option is for formatting and loading FPGA data.
The [-B] option is for board config file tests.
The [-V] option is for config variable information.
The [-E] option is for interpreting error numbers.
The [-M] option is for miscellaneous stuff.
C:\>c:\ti\ccsv7\ccs_base\common\uscif\dbgjtag.exe -f C:\Users\username\AppData\Local\TEXASI~1\CCS\
The [-f/-X] option was used, but the board config
file was not found or lacked read permission.
Its name was: 'C:\Users\username\AppData\Local\TEXASI~1\CCS\'.
C:\>c:\ti\ccsv7\ccs_base\common\uscif\dbgjtag.exe -f "C:\Users\username\AppData\Local\Texas Instruments\CCS\ti\0\0\BrdDat\testBoard.dat" -rv -o -S integrity
-----[Print the board config pathname(s)]------------------------------------
C:\Users\username\AppData\Local\Texas Instruments\
CCS\ti\0\0\BrdDat\testBoard.dat
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'jioxds110.dll'.
The library build date was 'Jul 21 2017'.
The library build time was '19:36:41'.
The library package version is '7.0.48.0'.
The library component version is '35.35.0.0'.
The controller does not use a programmable FPGA.
The controller has a version number of '5' (0x00000005).
The controller has an insertion length of '0' (0x00000000).
This utility will attempt to reset the controller to enter SWD mode.
-----[Print the reset-command hardware log-file]-----------------------------
This emulator does not create a reset log-file.
-----[Perform the SWD Mode Integrity test]-----------------------------------
This test will read the IDCODE register 1 time.
The IDCODE register value is 0x2ba01477.
The SWD Mode Integrity test has succeeded.
C:\>