今天我在用CCS刷写CC2650时,刷写过程中不小心把数据线拔了下来,之后XDS110的灯就不亮了,电脑也检测不到了,无法刷写,重新插拔没有反应。通过搜索,得知在C:\ti\ccsv6\ccs_base\common\uscif\xds110路径下,有一个readme.txt文件,其中写到了XDS驱动失效时的解决方式:
1)Plug the XDS110 debug probe into your computer. Make sure that you
only have one XDS110 class debug probe plugged in. The xdsdfu program
will attempt to flash the first XDS110 debug probe it finds.
将XDS110插入电脑,确保只有一只XDS110插入。xdsdfu这个软件将会刷写它找到的第一只XDS110。
2)Run the following two commands from this directory:
xdsdfu -m
xdsdfu -f firmware.bin -r
在readme.txt的文件夹中运行这两个指令,需要再dos中运行,并且要进入C:\ti\ccsv6\ccs_base\common\uscif\xds110这个文件夹内运行这两个指令。该操作可升级恢复XDS110的固件。
You may need to pause after the first command to give the OS time to recognize that the XDS110 has reconfigured as a different USB device.
Once the second command completes, the firmware is updated, and the debug probe should be ready to use.
之后需要等待电脑重新识别XDS110,识别成功后功能恢复正常。