转自:http://www.dpreview.com/learn/?/Glossary/Camera_System/sensor_sizes_01.htm
Sensor Sizes
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
This diagram shows the typical sensor sizes compared to 35mm film. The sensor sizes of digital SLRs are typically 40% to 100% of the surface of 35mm film. Digital compact cameras have substantially smaller sensors offering a similar number of pixels. As a consequence, the pixels are much smaller, which is a key reason for the image quality difference, especially in terms of noise and dynamic range. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sensor Type Designation
Sensors are often referred to with a "type" designation using imperial fractions such as 1/1.8" or 2/3" which are larger than the actual sensor diameters. The type designation harks back to a set of standard sizes given to TV camera tubes in the 50's. These sizes were typically 1/2", 2/3" etc. The size designation does not define the diagonal of the sensor area but rather the outer diameter of the long glass envelope of the tube. Engineers soon discovered that for various reasons the usable area of this imaging plane was approximately two thirds of the designated size. This designation has clearly stuck (although it should have been thrown out long ago). There appears to be no specific mathematical relationship between the diameter of the imaging circle and the sensor size, although it is always roughly two thirds.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Common Image Sensor SizesIn the table below "Type" refers to the commonly used type designation for sensors, "Aspect Ratio" refers to the ratio of width to height, "Dia." refers to the diameter of the tube size (this is simply the Type converted to millimeters), "Diagonal / Width / Height" are the dimensions of the sensors image producing area.
(*) Also called "APS-C". Many variants exist. APS-C film measures 25.1 x 16.7 mm, Sony's APS-C measures 21.5 x 14.4 mm, Nikon "DX" sensors measure 23.7 x 15.7 mm, while Canon has several (smaller and larger) variants, e.g. 22.2 x 14.8 mm and 28.7 x 19.1 mm. Implementation ExamplesBelow is a list of a few digital cameras (as examples) and their sensor size.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
See also Sensors, Effective Pixels, Pixels, and Pixel Quality. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|