[STM32U5]【NUCLEO-U575ZI-Q测评】DAC测试

STM32U5的DAC支持正常模式和采样保持模式，其中采样保持模式用于低功耗状态使用，每路 DAC 输出均可与 DAC_OUTx 输出引脚断开连接，而且 DAC 输出可与片上外设连接。一般情况下，使用出厂校准即可，芯片上电后自动完成出厂校准。STM32U5内置了高性能带PGA功能的运算放大器，可以通过配置形成多种常用模拟信号处理电路：

配置电压跟随器的用法：


DAC外设配置：

运放配置，将DAC输出连接到运放输入：


正弦输出表：

uint32_t Wave_LUT[128] = {

    2048, 2149, 2250, 2350, 2450, 2549, 2646, 2742, 2837, 2929, 3020, 3108, 3193, 3275, 3355,

    3431, 3504, 3574, 3639, 3701, 3759, 3812, 3861, 3906, 3946, 3982, 4013, 4039, 4060, 4076,

    4087, 4094, 4095, 4091, 4082, 4069, 4050, 4026, 3998, 3965, 3927, 3884, 3837, 3786, 3730,

    3671, 3607, 3539, 3468, 3394, 3316, 3235, 3151, 3064, 2975, 2883, 2790, 2695, 2598, 2500,

    2400, 2300, 2199, 2098, 1997, 1896, 1795, 1695, 1595, 1497, 1400, 1305, 1212, 1120, 1031,

    944, 860, 779, 701, 627, 556, 488, 424, 365, 309, 258, 211, 168, 130, 97,

    69, 45, 26, 13, 4, 0, 1, 8, 19, 35, 56, 82, 113, 149, 189,

    234, 283, 336, 394, 456, 521, 591, 664, 740, 820, 902, 987, 1075, 1166, 1258,

    1353, 1449, 1546, 1645, 1745, 1845, 1946, 2047

};

开启运放

 HAL_OPAMP_Start(&hopamp1);

开启DAC

HAL_DAC_Start(&hdac1, DAC_CHANNEL_1);

设置DAC输出值

HAL_DAC_SetValue(&hdac1, DAC_CHANNEL_1, DAC_ALIGN_12B_R, Wave_LUT[i]);

完整代码如下：

/* USER CODE BEGIN Header */

/**

  ******************************************************************************

  * [url=home.php?mod=space&uid=288409]@file[/url]           : main.c

  * [url=home.php?mod=space&uid=247401]@brief[/url]          : Main program body

  ******************************************************************************

  * @attention

  *

  * Copyright (c) 2023 STMicroelectronics.

  * All rights reserved.

  *

  * This software is licensed under terms that can be found in the LICENSE file

  * in the root directory of this software component.

  * If no LICENSE file comes with this software, it is provided AS-IS.

  *

  ******************************************************************************

  */

/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/

#include "main.h"

#include "adc.h"

#include "dac.h"

#include "opamp.h"

#include "ucpd.h"

#include "usart.h"

#include "usb_otg.h"

#include "gpio.h"



/* Private includes ----------------------------------------------------------*/

/* USER CODE BEGIN Includes */



#include <stdio.h>



/* USER CODE END Includes */



/* Private typedef -----------------------------------------------------------*/

/* USER CODE BEGIN PTD */



/* USER CODE END PTD */



/* Private define ------------------------------------------------------------*/

/* USER CODE BEGIN PD */

/* USER CODE END PD */



/* Private macro -------------------------------------------------------------*/

/* USER CODE BEGIN PM */



/* USER CODE END PM */



/* Private variables ---------------------------------------------------------*/



/* USER CODE BEGIN PV */



uint32_t Wave_LUT[128] = {

    2048, 2149, 2250, 2350, 2450, 2549, 2646, 2742, 2837, 2929, 3020, 3108, 3193, 3275, 3355,

    3431, 3504, 3574, 3639, 3701, 3759, 3812, 3861, 3906, 3946, 3982, 4013, 4039, 4060, 4076,

    4087, 4094, 4095, 4091, 4082, 4069, 4050, 4026, 3998, 3965, 3927, 3884, 3837, 3786, 3730,

    3671, 3607, 3539, 3468, 3394, 3316, 3235, 3151, 3064, 2975, 2883, 2790, 2695, 2598, 2500,

    2400, 2300, 2199, 2098, 1997, 1896, 1795, 1695, 1595, 1497, 1400, 1305, 1212, 1120, 1031,

    944, 860, 779, 701, 627, 556, 488, 424, 365, 309, 258, 211, 168, 130, 97,

    69, 45, 26, 13, 4, 0, 1, 8, 19, 35, 56, 82, 113, 149, 189,

    234, 283, 336, 394, 456, 521, 591, 664, 740, 820, 902, 987, 1075, 1166, 1258,

    1353, 1449, 1546, 1645, 1745, 1845, 1946, 2047

};



/* USER CODE END PV */



/* Private function prototypes -----------------------------------------------*/

void SystemClock_Config(void);

static void SystemPower_Config(void);

/* USER CODE BEGIN PFP */



/* USER CODE END PFP */



/* Private user code ---------------------------------------------------------*/

/* USER CODE BEGIN 0 */



/* USER CODE END 0 */



/**

  * [url=home.php?mod=space&uid=247401]@brief[/url]  The application entry point.

  * @retval int

  */

int main(void)

{

  /* USER CODE BEGIN 1 */



  /* USER CODE END 1 */



  /* MCU Configuration--------------------------------------------------------*/



  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */

  HAL_Init();



  /* USER CODE BEGIN Init */



  /* USER CODE END Init */



  /* Configure the system clock */

  SystemClock_Config();



  /* Configure the System Power */

  SystemPower_Config();



  /* USER CODE BEGIN SysInit */



  /* USER CODE END SysInit */



  /* Initialize all configured peripherals */

  MX_GPIO_Init();

  MX_UCPD1_Init();

  MX_USART1_UART_Init();

  MX_USB_OTG_FS_PCD_Init();

  MX_ADC1_Init();

  MX_OPAMP1_Init();

  MX_DAC1_Init();

  /* USER CODE BEGIN 2 */

在实际应用中采用定时器定时触发+DMA传输更实用。
---------------------
作者：dql2015
链接：https://bbs.21ic.com/icview-3289934-1-1.html
来源：21ic.com
此文章已获得原创/原创奖标签，著作权归21ic所有，任何人未经允许禁止转载。