[STM32MP1]【STM32MP135F-DK测评】SDK安装&运行第一个app程序

【安装SDK】
1、安装需要的工具

复制

xinmeng@7420-vm:~$ sudo apt-get install build-essential libncurses-dev libyaml-dev libssl-dev 

复制

xinmeng@7420-vm:~$ sudo apt-get install coreutils bsdmainutils sed curl bc lrzsz corkscrew cvs subversion mercurial nfs-common nfs-kernel-server libarchive-zip-perl dos2unix texi2html libxml2-utils

2、配置MMC分区
必须安装额外的配置，以支持每个MMC最多16个分区。默认情况下，在Linux®系统上，MMC上最多允许8个分区。所有软件包（Starter软件包，…）的存储设备都需要10个以上的分区。为了将每个设备的分区数扩展到16个，必须向modprobe添加以下选项：

复制

xinmeng@7420-vm:~$ echo 'options mmc_block perdev_minors=16' > /tmp/mmc_block.conf

xinmeng@7420-vm:~$ sudo mv /tmp/mmc_block.conf /etc/modprobe.d/mmc_block.conf

3、下载SDK
下载en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.tar.gz放入目录$HOME/STM32MPU_workspace/tmp中。
下载地址：https://www.st.com/en/embedded-s ... v.html#get-software
4、解压SDK

复制

xinmeng@7420-vm:~/STM32MPU_workspace/tmp$ tar xvf en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.tar.gz 

5、创建STM32MP1 Developer Package SDK目录

复制

xinmeng@7420-vm:~/STM32MPU_workspace/tmp$ mkdir -p $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK

6、增加SDK安装脚本的执行权限

复制

xinmeng@7420-vm:~/STM32MPU_workspace/tmp/en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21$ chmod +x stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21/sdk/st-image-weston-openstlinux-weston-stm32mp1-x86_64-toolchain-4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.sh

7、执行SDK安装脚本

复制

xinmeng@7420-vm:~/STM32MPU_workspace/tmp/en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21$ ./stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21/sdk/st-image-weston-openstlinux-weston-stm32mp1-x86_64-toolchain-4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21.sh -d $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK

完成安装结果如下

复制

ST OpenSTLinux - Weston - (A Yocto Project Based Distro) SDK installer version 4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21

===================================================================================================================================

You are about to install the SDK to "/home/xinmeng/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK". Proceed [Y/n]? y

Extracting SDK........................................................................................................................................................................................done

Setting it up...done

SDK has been successfully set up and is ready to be used.

Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.

 $ . /home/xinmeng/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/SDK/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi

注意：每次重开终端都必须重新source一下环境

复制

xinmeng@7420-vm:~/STM32MPU_workspace/tmp/en.SDK-x86_64-stm32mp1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21[        DISCUZ_CODE_124        ]nbsp; cd $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package[        DISCUZ_CODE_124        ]nbsp; source SDK/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi

8、安装完成后检查环境是否正常

1）检查目标芯片架构

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ echo $ARCH

返回结果：

arm
2）检查交叉编译工具

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ echo $CROSS_COMPILE

返回结果：
arm-ostl-linux-gnueabi-
3）检查C编译器版本

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ $CC --version

返回结果：
arm-ostl-linux-gnueabi-gcc (GCC) 12.2.0
Copyright (C) 2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
4）检查SDK版本

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ echo $OECORE_SDK_VERSION

返回结果：
4.2.1-openstlinux-6.1-yocto-mickledore-mp1-v23.06.21

【运行第一个APP程序】
1、创建目录用于存放app源代码

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ mkdir $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ mkdir $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ mkdir $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example

2、进入gtk_hello_world_example目录

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package$ cd $HOME/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example

3、创建源文件gtk_hello_world.c并键入如下代码

复制

#include <gtk/gtk.h>



static void

print_hello (GtkWidget *widget,

             gpointer   data)

{

  g_print ("Hello World\n");

}



static void

activate (GtkApplication *app,

          gpointer        user_data)

{

  GtkWidget *window;

  GtkWidget *button;

  GtkWidget *button_box;



  window = gtk_application_window_new (app);

  gtk_window_set_title (GTK_WINDOW (window), "Window");

  gtk_window_set_default_size (GTK_WINDOW (window), 200, 200);



  button_box = gtk_button_box_new (GTK_ORIENTATION_HORIZONTAL);

  gtk_container_add (GTK_CONTAINER (window), button_box);



  button = gtk_button_new_with_label ("Hello World");

  g_signal_connect (button, "clicked", G_CALLBACK (print_hello), NULL);

  g_signal_connect_swapped (button, "clicked", G_CALLBACK (gtk_widget_destroy), window);

  gtk_container_add (GTK_CONTAINER (button_box), button);



  gtk_widget_show_all (window);

}



int

main (int    argc,

      char **argv)

{

  GtkApplication *app;

  int status;



  app = gtk_application_new ("org.gtk.example", G_APPLICATION_DEFAULT_FLAGS);

  g_signal_connect (app, "activate", G_CALLBACK (activate), NULL);

  status = g_application_run (G_APPLICATION (app), argc, argv);

  g_object_unref (app);



  return status;

}

4、创建Makefile文件并键入如下内容

复制

PROG = gtk_hello_world

SRCS = gtk_hello_world.c



CLEANFILES = $(PROG)



# Add / change option in CFLAGS and LDFLAGS

CFLAGS += -Wall $(shell pkg-config --cflags gtk+-3.0)

LDFLAGS += $(shell pkg-config --libs gtk+-3.0)



all: $(PROG)



$(PROG): $(SRCS)

        $(CC) -o $[url=home.php?mod=space&uid=72445]@[/url] $^ $(CFLAGS) $(LDFLAGS)



clean:

        rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS))

5、编译

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example$ make

编译后生成gtk_hello_world可执行文件
 

6、通过SSH上传到开发板

复制

xinmeng@7420-vm:~/STM32MPU_workspace/STM32MP1-Ecosystem-v5.0.0/Developer-Package/stm32mp1-openstlinux-23.06.21/sources/gtk_hello_world_example$  scp gtk_hello_world root@192.168.7.1:/usr/local

 

 

7、运行程序

第一个APP程序运行成功
---------------------
作者：xinmeng_wit
链接：https://bbs.21ic.com/icview-3352726-1-1.html
来源：21ic.com
此文章已获得原创/原创奖标签，著作权归21ic所有，任何人未经允许禁止转载。