linux使用spi读取icm20608传感器数值一直显示0

1.这个问题困扰了我两天，把下面这些uart2相关引脚屏蔽掉也不行，ICM20608 ID 读出的数值一直为 0X0

pinctrl_flexcan2: flexcan2grp{
fsl,pins = <
/* MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020*/
/* MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020*/
>;
};

pinctrl_uart2: uart2grp {
fsl,pins = <
/* MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1*/
MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
>;
};

	pinctrl_uart2dte: uart2dtegrp {
		fsl,pins = <
			/* MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
			// MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
			// MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS	0x1b0b1
			// MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS	0x1b0b1*/
		>;
	};

ecspi3使用原厂的代码也不行

/mnt/22_spi # insmod icm20608.ko
ICM20608 ID = 0X0

2.后来发现出厂源码写错了！！！！！！！cs-gpio少些了一个s。改后就可以读到ID值了。

/mnt/22_spi # insmod icm20608.ko
ICM20608 ID = 0XAE