framebuffer分析

kernel-4.4/drivers/misc/brand/video/product/videox/mtkfb.c
.compatible = "brand,MTKFB",

unsigned int lcd_fps = 6000;

mtkfb_probe

//分配物理、虚拟地址
disp_hal_allocate_framebuffer(fb_base, (fb_base + vramsize - 1),(unsigned long *)(&fbdev->fb_va_base), &fb_pa);
fbdev->fb_pa_base = fb_base;
primary_display_set_frame_buffer_address((unsigned long)(fbdev->fb_va_base), fb_pa);//pgc->framebuffer_va = fbdev->fb_va_base;pgc->framebuffer_mva = fbdev->fb_pa_base;
primary_display_init(mtkfb_find_lcm_driver(), lcd_fps, is_lcm_inited);//mtkfb_find_lcm_driver：nt35521_hd_dsi_vdo_truly_nt50358_drv

return pgc->plcm->params->physical_width;

mtkfb_fbinfo_init //填充fb_info结构体

static struct fb_ops mtkfb_ops = {
    .owner = THIS_MODULE,
    .fb_open = mtkfb_open,
    .fb_release = mtkfb_release,
    .fb_setcolreg = mtkfb_setcolreg,
    .fb_pan_display = mtkfb_pan_display_proxy,
    .fb_fillrect = cfb_fillrect,
    .fb_copyarea = cfb_copyarea,
    .fb_imageblit = cfb_imageblit,
    .fb_cursor = mtkfb_soft_cursor,
    .fb_check_var = mtkfb_check_var,
    .fb_set_par = mtkfb_set_par,
    .fb_ioctl = mtkfb_ioctl,
#ifdef CONFIG_COMPAT
    .fb_compat_ioctl = mtkfb_compat_ioctl,
#endif
#if defined(CONFIG_PM_AUTOSLEEP)
    .fb_blank = mtkfb_blank,
#endif
};

    chosen {
        bootargs = "console=tty0 console=ttyMT0,921600n1 root=/dev/ram initrd=0x44000000,\
0x1000000 loglevel=8 androidboot.selinux=permissive androidboot.hardware=product initcall_debug=1"