LCP4078时钟配置

void SystemInit (void)
{
#ifndef __CODE_RED
#ifdef CORE_M4
fpu_init();
#endif
#endif

#if (CLOCK_SETUP)                       /* Clock Setup                        */
  LPC_SC->SCS       = SCS_Val;			//#define SCS_Val  0x00000020 主振荡器被使能，且在正确的外部电路连接到XTAL1 和XTAL2引脚的情况下启动。
  if (SCS_Val & (1 << 5)) {             /* If Main Oscillator is enabled      */		//上面一条语句已使能Oscillator 
    while ((LPC_SC->SCS & (1<<6)) == 0);/* Wait for Oscillator to be ready    */		//等待Oscillator稳定标志位置1
  }

  LPC_SC->CLKSRCSEL = CLKSRCSEL_Val;    /* Select Clock Source for sysclk/PLL0*/	//#define CLKSRCSEL_Val   0x00000001

 #if (PLL0_SETUP)
  LPC_SC->PLL0CFG   = PLL0CFG_Val;		//#define PLL0CFG_Val  0x00000009		12M*(9+1)=120M
  LPC_SC->PLL0CON   = 0x01;             /* PLL0 Enable                        */
  LPC_SC->PLL0FEED  = 0xAA;
  LPC_SC->PLL0FEED  = 0x55;
  while (!(LPC_SC->PLL0STAT & (1<<10)));/* Wait for PLOCK0                    */		//PLOCK
#endif

#if (PLL1_SETUP)
  LPC_SC->PLL1CFG   = PLL1CFG_Val;
  LPC_SC->PLL1CON   = 0x01;             /* PLL1 Enable                        */
  LPC_SC->PLL1FEED  = 0xAA;
  LPC_SC->PLL1FEED  = 0x55;
  while (!(LPC_SC->PLL1STAT & (1<<10)));/* Wait for PLOCK1                    */
#endif

LPC_SC->CCLKSEL   = CCLKSEL_Val;      /* Setup Clock Divider                */		//#define CCLKSEL_Val   0x00000101  120M/1=120M
  LPC_SC->USBCLKSEL = USBCLKSEL_Val;    /* Setup USB Clock Divider            */
  LPC_SC->EMCCLKSEL = EMCCLKSEL_Val;    /* EMC Clock Selection                */
  LPC_SC->SPIFICLKSEL  = SPIFICLKSEL_Val;  /* SPIFI Clock Selection              */
  LPC_SC->PCLKSEL   = PCLKSEL_Val;      /* Peripheral Clock Selection         */		//#define PCLKSEL_Val   0x00000002   120M/2=60M
  LPC_SC->PCONP     = PCONP_Val;        /* Power Control for Peripherals      */
  LPC_SC->CLKOUTCFG = CLKOUTCFG_Val;    /* Clock Output Configuration         */
#endif

 LPC_SC->PBOOST 	|= 0x03;			/* Power Boost control				*/			//120M以上开启

 #if (FLASH_SETUP == 1)                  /* Flash Accelerator Setup            */
  LPC_SC->FLASHCFG  = FLASHCFG_Val|0x03A;		//#define FLASHCFG_Val   0x00005000     //120M
#endif
#ifndef __CODE_RED
#ifdef  __RAM_MODE__
  SCB->VTOR  = 0x10000000 & 0x3FFFFF80;
#else
  SCB->VTOR  = 0x00000000 & 0x3FFFFF80;
#endif
#endif
  SystemCoreClockUpdate();
}

void SystemCoreClockUpdate (void)            /* Get Core Clock Frequency      */
{
  /* Determine clock frequency according to clock register values             */
  if ((LPC_SC->CCLKSEL &0x100) == 0) {            /* cclk = sysclk    */
    if ((LPC_SC->CLKSRCSEL & 0x01) == 0) {    /* sysclk = irc_clk */
		  SystemCoreClock = __CLK_DIV(IRC_OSC , (LPC_SC->CCLKSEL & 0x1F));
          PeripheralClock = __CLK_DIV(IRC_OSC , (LPC_SC->PCLKSEL & 0x1F));
          EMCClock        = (SystemCoreClock / ((LPC_SC->EMCCLKSEL & 0x01)+1));
    }
    else {                                        /* sysclk = osc_clk */
      if ((LPC_SC->SCS & 0x40) == 0) {
          SystemCoreClock = 0;                      /* this should never happen! */
          PeripheralClock = 0;
          EMCClock        = 0;
      }
      else {
          SystemCoreClock = __CLK_DIV(OSC_CLK , (LPC_SC->CCLKSEL & 0x1F));
          PeripheralClock = __CLK_DIV(OSC_CLK , (LPC_SC->PCLKSEL & 0x1F));
          EMCClock        = (SystemCoreClock / ((LPC_SC->EMCCLKSEL & 0x01)+1));
      }
    }
  }
  else {                                          /* cclk = pll_clk */
    if ((LPC_SC->PLL0STAT & 0x100) == 0) {        /* PLL0 not enabled */
          SystemCoreClock = 0;                      /* this should never happen! */
          PeripheralClock = 0;
          EMCClock 		  = 0;
    }
    else {
      if ((LPC_SC->CLKSRCSEL & 0x01) == 0) {    /* sysclk = irc_clk */
          uint8_t mul = ((LPC_SC->PLL0STAT & 0x1F) + 1);
          uint8_t cpu_div = (LPC_SC->CCLKSEL & 0x1F);
          uint8_t per_div = (LPC_SC->PCLKSEL & 0x1F);
          uint8_t emc_div = (LPC_SC->EMCCLKSEL & 0x01)+1;
          SystemCoreClock = __CLK_DIV(IRC_OSC * mul , cpu_div);
          PeripheralClock = __CLK_DIV(IRC_OSC * mul , per_div);
          EMCClock        = SystemCoreClock / emc_div;
      }
      else {                                        /* sysclk = osc_clk */
        if ((LPC_SC->SCS & 0x40) == 0) {
          SystemCoreClock = 0;                      /* this should never happen! */
          PeripheralClock = 0;
          EMCClock 		  = 0;
        }
        else {
          uint8_t mul = ((LPC_SC->PLL0STAT & 0x1F) + 1);		//PLL0STAT=0x509, bit0~4, mul = 0x509 & 0x1F + 1 =  9 + 1 = 10
          uint8_t cpu_div = (LPC_SC->CCLKSEL & 0x1F);			//CCLKSEL=0x101, bit0~4, cpu_div = 0x101 & 0x1F = 1
          uint8_t per_div = (LPC_SC->PCLKSEL & 0x1F);			//PCLKSEL=0x2, bit0~4, per_div = 0x2 & 0x1F = 2   可取1~4
		  uint8_t emc_div = (LPC_SC->EMCCLKSEL & 0x01)+1;
//#define XTAL        (12000000UL)        /* Oscillator frequency               */
//#define OSC_CLK     (      XTAL)        /* Main oscillator frequency          */
//#define __CLK_DIV(x,y) (((y) == 0) ? 0: (x)/(y))	
          SystemCoreClock = __CLK_DIV(OSC_CLK * mul , cpu_div);	//SystemCoreClock = 12M*10/1 = 120M
          PeripheralClock = __CLK_DIV(OSC_CLK * mul , per_div);		//PeripheralClock = 12M*10/2 = 60M
          EMCClock        = SystemCoreClock / emc_div;
        }
      }
    }
  }
  /* ---update USBClock------------------*/
  if(LPC_SC->USBCLKSEL & (0x01<<8))//Use PLL0 as the input to the USB clock divider
  {
	  switch (LPC_SC->USBCLKSEL & 0x1F)
	  {
	  case 0:
		  USBClock = 0; //no clock will be provided to the USB subsystem
		  break;
	  case 4:
	  case 6:
            {
                 uint8_t mul = ((LPC_SC->PLL0STAT & 0x1F) + 1);
                 uint8_t usb_div = (LPC_SC->USBCLKSEL & 0x1F);
		  if(LPC_SC->CLKSRCSEL & 0x01)	//pll_clk_in = main_osc
			  USBClock = OSC_CLK * mul / usb_div;
		  else //pll_clk_in = irc_clk
			  USBClock = IRC_OSC * mul / usb_div;
            }
            break;
	  default:
		  USBClock = 0;  /* this should never happen! */
	  }
  }
  else if(LPC_SC->USBCLKSEL & (0x02<<8))//usb_input_clk = alt_pll (pll1)
  {
	  if(LPC_SC->CLKSRCSEL & 0x01)	//pll1_clk_in = main_osc
	  		USBClock = (OSC_CLK * ((LPC_SC->PLL1STAT & 0x1F) + 1));
	  else //pll1_clk_in = irc_clk
	  		USBClock = (IRC_OSC * ((LPC_SC->PLL0STAT & 0x1F) + 1));
  }
  else
	  USBClock = 0; /* this should never happen! */
}