AXD Jlink调试问题

       用AXD调试程序时 按F5(RUN)就会弹出

"Processor ARM79_0 raised an exception Cause Undefined instruction "

提示框。

真是郁闷，捣鼓了半天还是没什么进展。突然，发现AXD的调试窗口有汉字出现 。

哈哈，问题终于浮出水面了。

 

原来我的2440init.txt 文件如下：

 

setmem 0x53000000,0x00000000,32; pWTCON , 看门狗定时器控制寄存器
setmem 0x4a000008,0xffffffff,32; INTMSK , 中断屏蔽寄存器
setmem 0x4a00001c,0x00007fff,32; INTSUBMSK , 中断屏蔽寄存器
setmem 0x48000000,0x2212d110,32; 总线宽度和等待控制寄存器
setmem 0x48000004,0x00000f40,32; Boot ROM control
setmem 0x48000008,0x00002e50,32; BANK1 control
setmem 0x4800000c,0x00002e50,32; BANK2 control
setmem 0x48000010,0x00002e50,32; BANK3 control
setmem 0x48000014,0x00002e50,32; BANK4 control
setmem 0x48000018,0x00002e50,32; BANK5 control
setmem 0x4800001c,0x00018005,32; BANK6 control
setmem 0x48000020,0x00018005,32; BANK7 control
setmem 0x48000024,0x00960542,32; 刷新控制寄存器
setmem 0x48000028,0x00000032,32; Bank大小控制寄存器
setmem 0x4800002c,0x00000030,32; SDRAM模式寄存器组--Mode register set for SDRAM
setmem 0x48000030,0x00000030,32; SDRAM模式寄存器组--Mode register set for SDRAM

 

去掉汉字后，变为

 

setmem 0x53000000,0x00000000,32
setmem 0x4a000008,0xffffffff,32
setmem 0x4a00001c,0x00007fff,32
setmem 0x48000000,0x2212d110,32
setmem 0x48000004,0x00000f40,32
setmem 0x48000008,0x00002e50,32
setmem 0x4800000c,0x00002e50,32
setmem 0x48000010,0x00002e50,32
setmem 0x48000014,0x00002e50,32
setmem 0x48000018,0x00002e50,32
setmem 0x4800001c,0x00018005,32
setmem 0x48000020,0x00018005,32
setmem 0x48000024,0x00960542,32
setmem 0x48000028,0x00000032,32
setmem 0x4800002c,0x00000030,32
setmem 0x48000030,0x00000030,32

 

 

这才是正确的。然后重新启动调试。哈哈哈，一切正常了。

另附

另外问题导致上述错误 的解决方法(其实就是配置过程)

http://blog.csdn.net/yimu13/article/details/6018803#comments

和《ADS无OS实验手册》已经上传。

http://download.csdn.net/detail/lonerzf/3657477