HCIA第七次作业

0.00% packet loss
round-trip min/avg/max = 40/66/130 ms

display ip rou
display ip routing-table pro
display ip routing-table protocol rip
Route Flags: R - relay, D - download to fib

Public routing table : RIP
Destinations : 8 Routes : 9

RIP routing table status :
Destinations : 8 Routes : 9

Destination/Mask Proto Pre Cost Flags NextHop Interface

    0.0.0.0/0   RIP     100  2           D   123.1.1.5       GigabitEthernet

0/0/0
23.1.1.0/24 RIP 100 1 D 123.1.1.2 GigabitEthernet
0/0/0
34.1.1.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0
45.1.1.0/24 RIP 100 1 D 123.1.1.5 GigabitEthernet
0/0/0
192.168.2.0/25 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
192.168.2.128/25 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
192.168.3.0/25 RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0
192.168.3.128/25 RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0

RIP routing table status :
Destinations : 0 Routes : 0

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R1]dis
[R1]display ip rou
[R1]display ip routing-pro
[R1]display ip routing-
[R1]display ip routing-table pr
[R1]display ip routing-table protocol rip
Route Flags: R - relay, D - download to fib

Public routing table : RIP
Destinations : 8 Routes : 9

RIP routing table status :
Destinations : 8 Routes : 9

Destination/Mask Proto Pre Cost Flags NextHop Interface

    0.0.0.0/0   RIP     100  2           D   123.1.1.5       GigabitEthernet

0/0/0
23.1.1.0/24 RIP 100 1 D 123.1.1.2 GigabitEthernet
0/0/0
34.1.1.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0
45.1.1.0/24 RIP 100 1 D 123.1.1.5 GigabitEthernet
0/0/0
192.168.2.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
192.168.3.0/24 RIP 100 3 D 123.1.1.2 GigabitEthernet
0/0/0
192.168.3.0/25 RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0
192.168.3.128/25 RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0

RIP routing table status :
Destinations : 0 Routes : 0

[R1]display ip routing-table protocol rip
Route Flags: R - relay, D - download to fib

Public routing table : RIP
Destinations : 6 Routes : 7

RIP routing table status :
Destinations : 6 Routes : 7

Destination/Mask Proto Pre Cost Flags NextHop Interface

    0.0.0.0/0   RIP     100  2           D   123.1.1.5       GigabitEthernet

0/0/0
23.1.1.0/24 RIP 100 1 D 123.1.1.2 GigabitEthernet
0/0/0
34.1.1.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0
45.1.1.0/24 RIP 100 1 D 123.1.1.5 GigabitEthernet
0/0/0
192.168.2.0/24 RIP 100 2 D 123.1.1.2 GigabitEthernet
0/0/0
192.168.3.0/24 RIP 100 2 D 123.1.1.5 GigabitEthernet
0/0/0

RIP routing table status :
Destinations : 0 Routes : 0

[R1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R1]rip 1
[R1-rip-1]version
[R1-rip-1]version 2
[R1-rip-1]timers rip 15 90 60
[R1-rip-1]q
[R1]dis
[R1]display c
^
Error:Ambiguous command found at ‘^’ position.
[R1]display con
^
Error:Ambiguous command found at ‘^’ position.
[R1]display cr
[R1]display cr
[R1]display cr
[R1]display cren
[R1]display c
[R1]display calibrate
^
Error:Incomplete command found at ‘^’ position.
[R1]display c
[R1]display capwap
[R1]display channel
[R1]display clock
2024-03-02 14:36:11
Saturday
Time Zone(China-Standard-Time) : UTC-08:00
[R1]display clock
[R1]display clock
[R1]display clock
[R1]display clock
[R1]display clock
[R1]display clock
[R1]display clock
[R1]display clock
[R1]display c
[R1]display calibrate
[R1]display capwap
[R1]display channel
[R1]display clock
[R1]display config
[R1]display controller
[R1]display cpos
[R1]display cpu-defend
[R1]display cpu-usage
[R1]display current-configuration
[R1]display cwmp
[R1]display cu
[R1]display current-configuration
[V200R003C00]

sysname R1

snmp-agent local-engineid 800007DB03000000000000
snmp-agent

clock timezone China-Standard-Time minus 08:00:00

portal local-server load portalpage.zip

drop illegal-mac alarm

set cpu-usage threshold 80 restore 75

aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher % % K8m.Nt84DZ}e#<0`8bmE3Uw}% %
local-user admin service-type http

firewall zone Local
priority 15

interface GigabitEthernet0/0/0
ip address 123.1.1.1 255.255.255.0

interface GigabitEthernet0/0/1

interface GigabitEthernet0/0/2

[R1]display current
[V200R003C00]

sysname R1

snmp-agent local-engineid 800007DB03000000000000
snmp-agent

clock timezone China-Standard-Time minus 08:00:00

portal local-server load portalpage.zip

drop illegal-mac alarm

set cpu-usage threshold 80 restore 75

aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user admin password cipher % % K8m.Nt84DZ}e#<0`8bmE3Uw}% %
local-user admin service-type http

firewall zone Local

[R1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

R2

Mar 2 2024 13:13:33-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt hernet0/0/0 has turned into UP state. Mar 2 2024 13:13:37-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt hernet0/0/1 has turned into UP state. SYS Enter system view, return user view with Ctrl+Z. [Huawei]SYS [Huawei]sysname R2 [R2]inter [R2]interface g0/0/0 [R2-GigabitEthernet0/0/0]ip add [R2-GigabitEthernet0/0/0]ip address 123.1.1.2 24 Mar 2 2024 13:18:32-08:00 R2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R2-GigabitEthernet0/0/0]q [R2]imter [R2]imter [R2]imter ^ Error: Unrecognized command found at '^' position. [R2]inter [R2]interface g0/0/1 [R2-GigabitEthernet0/0/1]ip add [R2-GigabitEthernet0/0/1]ip address 23.1.1.2 24 Mar 2 2024 13:19:41-08:00 R2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R2-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R2]inte
[R2]interface loop
[R2]interface LoopBack 0
[R2-LoopBack0]ip add
[R2-LoopBack0]ip address 12.168.1.1 25
[R2-LoopBack0]q
[R2]inter
[R2]interface loo
[R2]interface LoopBack 1
[R2-LoopBack1]ip add
[R2-LoopBack1]ip address 190.168.1.129 25
[R2-LoopBack1]
[R2-LoopBack1]
[R2-LoopBack1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

ping 123.1.1.1
PING 123.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 123.1.1.1: bytes=56 Sequence=1 ttl=255 time=120 ms
Reply from 123.1.1.1: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 123.1.1.1: bytes=56 Sequence=3 ttl=255 time=60 ms
Reply from 123.1.1.1: bytes=56 Sequence=4 ttl=255 time=50 ms
Reply from 123.1.1.1: bytes=56 Sequence=5 ttl=255 time=40 ms

— 123.1.1.1 ping statistics —
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/66/120 ms

ping 123.1.1.5
PING 123.1.1.5: 56 data bytes, press CTRL_C to break
Reply from 123.1.1.5: bytes=56 Sequence=1 ttl=255 time=100 ms
Reply from 123.1.1.5: bytes=56 Sequence=2 ttl=255 time=40 ms
Reply from 123.1.1.5: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 123.1.1.5: bytes=56 Sequence=4 ttl=255 time=50 ms
Reply from 123.1.1.5: bytes=56 Sequence=5 ttl=255 time=30 ms

— 123.1.1.5 ping statistics —
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/54/100 ms

ping 23.1.1.3
PING 23.1.1.3: 56 data bytes, press CTRL_C to break
Reply from 23.1.1.3: bytes=56 Sequence=1 ttl=255 time=70 ms
Reply from 23.1.1.3: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 23.1.1.3: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 23.1.1.3: bytes=56 Sequence=4 ttl=255 time=30 ms
Reply from 23.1.1.3: bytes=56 Sequence=5 ttl=255 time=30 ms

— 23.1.1.3 ping statistics —
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/36/70 ms

sys Enter system view, return user view with Ctrl+Z. [R2]rip 1 [R2-rip-1]ever [R2-rip-1]ve [R2-rip-1]vever [R2-rip-1]ver [R2-rip-1]version 2 [R2-rip-1]net [R2-rip-1]network 123.0.0.0 [R2-rip-1]net [R2-rip-1]network 23.0.0.0 [R2-rip-1]network 192.168.1.0 [R2-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R2]inter
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]rip sum
[R2-GigabitEthernet0/0/0]rip summary-address 192.168.1.0 255.255.255.0
[R2-GigabitEthernet0/0/0]q
[R2]inter
[R2]interface g0/0/1
[R2-GigabitEthernet0/0/1]rip sum
[R2-GigabitEthernet0/0/1]rip summary-address 192.168.1.0 255.255.255.0
[R2-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R2]ip route
[R2]ip route-
[R2]ip route-static 192.168.1.0 255.255.255.0 nu
[R2]ip route-static 192.168.1.0 255.255.255.0 NULL 0
[R2]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R2]ip rou [R2]ip route- [R2]ip route-static q ^ Error: Wrong parameter found at '^' position. [R2]inter [R2]interface g0/0/0 [R2-GigabitEthernet0/0/0]rip sum [R2-GigabitEthernet0/0/0]rip summary-address md5 us [R2-GigabitEthernet0/0/0]rip auth [R2-GigabitEthernet0/0/0]rip authentication-mode md5 usual huawei [R2-GigabitEthernet0/0/0]undo rip authentication-mode [R2-GigabitEthernet0/0/0]q [R2]inter [R2]interface g0/0/1 [R2-GigabitEthernet0/0/1]rip sum [R2-GigabitEthernet0/0/1]rip au [R2-GigabitEthernet0/0/1]rip authentication-mode md5 usual huawei [R2-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R2]rip 1
[R2-rip-1]version 2
[R2-rip-1]timers rip 15 90 60
[R2-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

R3

Mar 2 2024 13:13:37-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt hernet0/0/0 has turned into UP state. Mar 2 2024 13:13:43-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt hernet0/0/1 has turned into UP state. SYS system-view Enter system view, return user view with Ctrl+Z. [Huawei]SYS [Huawei]sysname R3 [R3]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R3]inter [R3]interface g0/0/0 [R3-GigabitEthernet0/0/0]ip add [R3-GigabitEthernet0/0/0]ip address 23.1.1.3 24 Mar 2 2024 13:21:30-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R3-GigabitEthernet0/0/0]q [R3]inter [R3]interface g0/0/1 [R3-GigabitEthernet0/0/1]ip add [R3-GigabitEthernet0/0/1]ip address 34.1.1.3 24 Mar 2 2024 13:22:43-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R3-GigabitEthernet0/0/1] [R3-GigabitEthernet0/0/1]q [R3]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R3]inter [R3]interface lo [R3]interface LoopBack 0 [R3-LoopBack0]ip add [R3-LoopBack0]ip address 192.168.2.1 25 [R3-LoopBack0]q [R3]inter [R3]interface loo [R3]interface LoopBack 1 [R3-LoopBack1]ip add [R3-LoopBack1]ip address 192.168.2.129 25 [R3-LoopBack1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R3]rip 1 [R3-rip-1]ver [R3-rip-1]verify-source [R3-rip-1] [R3-rip-1] [R3-rip-1]ver [R3-rip-1]version 2 [R3-rip-1]net [R3-rip-1]network 23.0.0.0 [R3-rip-1]network 34.0.0.0 [R3-rip-1]network 192.168.2.0 [R3-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R3]inter [R3]interface g0/0/0 [R3-GigabitEthernet0/0/0]rip sum [R3-GigabitEthernet0/0/0]rip summary-address 192.168.2.0 255.255.255.0 [R3-GigabitEthernet0/0/0]q [R3]inter [R3]interface g0/0/1 [R3-GigabitEthernet0/0/1]rip sum [R3-GigabitEthernet0/0/1]rip summary-address 192.168.2.0 255.255.255.0 [R3-GigabitEthernet0/0/1]q [R3]ip route [R3]ip route- [R3]ip route-static 192.168.2.0 255.255.255.0

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R3]ip youte [R3]ip route [R3]ip route- [R3]ip route-static 192.168.2.0 255.255.255.0 nu [R3]ip route-static 192.168.2.0 255.255.255.0 NULL 0 [R3]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R3]
[R3]inter
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]rip au
[R3-GigabitEthernet0/0/0]rip authentication-mode md5 usual huawei
[R3-GigabitEthernet0/0/0]
^
Error: Unrecognized command found at ‘^’ position.
[R3-GigabitEthernet0/0/0]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R3]rip 1
[R3-rip-1]ver
[R3-rip-1]version 2
[R3-rip-1]timers rip 15 90 60
[R3-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

R4

Huawei>
Mar 2 2024 13:13:43-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.

Mar 2 2024 13:13:43-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.

SYS
Enter system view, return user view with Ctrl+Z.
[Huawei]SYS
[Huawei]sysname R4
[R4]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R4]inter
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]ip add
[R4-GigabitEthernet0/0/0]ip address 34.1.1.4 24
Mar 2 2024 13:23:40-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R4-GigabitEthernet0/0/0]inter
[R4-GigabitEthernet0/0/0]inter
[R4-GigabitEthernet0/0/0]q
[R4]inter
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]ip add
[R4-GigabitEthernet0/0/1]ip address 45.1.1.4 24
Mar 2 2024 13:24:38-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R4-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R4]inter [R4]interface loo [R4]interface LoopBack 0 [R4-LoopBack0]ip addd [R4-LoopBack0]ip add [R4-LoopBack0]ip address 192.168.3.1 25 [R4-LoopBack0]q [R4]inter [R4]interface loop [R4]interface LoopBack 1 [R4-LoopBack1]ip add [R4-LoopBack1]ip address 192.168.3.129 25 [R4-LoopBack1]q [R4]q ping 4.1.1.3 PING 4.1.1.3: 56 data bytes, press CTRL_C to break Request time out Request time out Request time out Request time out Request time out

— 4.1.1.3 ping statistics —
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss

ping 45.1.1.5
PING 45.1.1.5: 56 data bytes, press CTRL_C to break
Reply from 45.1.1.5: bytes=56 Sequence=1 ttl=255 time=60 ms
Reply from 45.1.1.5: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 45.1.1.5: bytes=56 Sequence=3 ttl=255 time=30 ms
Reply from 45.1.1.5: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 45.1.1.5: bytes=56 Sequence=5 ttl=255 time=20 ms

— 45.1.1.5 ping statistics —
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/30/60 ms

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R4]rip 1
[R4-rip-1]ver
[R4-rip-1]verify-sourcever
^
Error: Unrecognized command found at ‘^’ position.
[R4-rip-1]vers
[R4-rip-1]version 2
[R4-rip-1]networ
[R4-rip-1]network 34.0.0.0
[R4-rip-1]network 45.0.0.0
[R4-rip-1]network 192.168.3.0
[R4-rip-1]q
[R4]inter
[R4]interface loo
[R4]interface LoopBack 2
[R4-LoopBack2]ip ad
[R4-LoopBack2]ip address 100.1.1.1 24
[R4-LoopBack2]q
[R4]rip 1
[R4-rip-1]er
[R4-rip-1]er
^
Error: Unrecognized command found at ‘^’ position.
[R4-rip-1]
[R4-rip-1]ver
[R4-rip-1]verify-source
[R4-rip-1]ver
[R4-rip-1]version 2
[R4-rip-1]de
[R4-rip-1]defa
[R4-rip-1]default-route ori
[R4-rip-1]default-route originate
[R4-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R4]inter
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]ripsum
[R4-GigabitEthernet0/0/0]rip sum
[R4-GigabitEthernet0/0/0]rip summary-address 192.168.3.0 255.255.255.0
[R4-GigabitEthernet0/0/0]q
[R4]imte
[R4]imter
[R4]inter
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]rip sum
[R4-GigabitEthernet0/0/1]rip summary-address 192.168.1.0 255.255.255.0
[R4-GigabitEthernet0/0/1]q
[R4]ip rou
[R4]ip route-
[R4]ip route-static 192.168.1.0 24 nu
[R4]ip route-static 192.168.1.0 24 NULL 0
[R4]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R4]undo ip route-static 192.168.1.0 24 NULL 0
[R4]
[R4]ip rou
[R4]ip route-
[R4]ip route-static 192.168.3.0 255.255.255.0 nu
[R4]ip route-static 192.168.3.0 255.255.255.0 NULL 0
[R4]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R4]inter
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]dis
[R4-GigabitEthernet0/0/1]discard
[R4-GigabitEthernet0/0/1]display this
[V200R003C00]

interface GigabitEthernet0/0/1
ip address 45.1.1.4 255.255.255.0
rip summary-address 192.168.1.0 255.255.255.0

return
[R4-GigabitEthernet0/0/1]undo rip summary-address 192.168.1.0 255.255.255.0
[R4-GigabitEthernet0/0/1]rip sum
[R4-GigabitEthernet0/0/1]rip summary-address 192.168.3.0 255.255.255.0
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]q
[R4]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R4]rip
[R4-rip-1]version 2
[R4-rip-1]timers rip 15 90 60
[R4-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

R5

Mar 2 2024 13:13:39-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt hernet0/0/1 has turned into UP state. Mar 2 2024 13:13:42-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt hernet0/0/0 has turned into UP state. SYS Enter system view, return user view with Ctrl+Z. [Huawei]STS [Huawei]STS ^ Error: Unrecognized command found at '^' position. [Huawei] [Huawei]SYS [Huawei]sysname R5 [R5]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R5]inter
[R5]interface g0/0/0
[R5-GigabitEthernet0/0/0]ip add
[R5-GigabitEthernet0/0/0]ip address 45.1.1.5 24
Mar 2 2024 13:26:22-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]q
[R5]inter
[R5]interface g0/0/1
[R5-GigabitEthernet0/0/1]ip add
[R5-GigabitEthernet0/0/1]ip address 123.1.1.5 24
Mar 2 2024 13:27:26-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R5-GigabitEthernet0/0/1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys
Enter system view, return user view with Ctrl+Z.
[R5]rip 1
[R5-rip-1]versi
[R5-rip-1]version 2
[R5-rip-1]net
[R5-rip-1]network 45.0.0.0
[R5-rip-1]network 123.0.0.0
[R5-rip-1]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

sys Enter system view, return user view with Ctrl+Z. [R5]rip 1 [R5-rip-1]version 2 [R5-rip-1]timers rip 15 90 60 [R5-rip-1]dis [R5-rip-1]display ^ Error:Incomplete command found at '^' position. [R5-rip-1]display up [R5-rip-1]display up [R5-rip-1]display update [R5-rip-1]display updateq ^ Error: Wrong parameter found at '^' position. [R5-rip-1]q [R5]q sys Enter system view, return user view with Ctrl+Z. [R5]dis [R5]display ^ Error:Incomplete command found at '^' position. [R5]display up [R5]display update time ^ Error: Wrong parameter found at '^' position. [R5]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on