混杂VLAN实验

1.实验要求：

2.拓扑搭建：

3.配置

3.1交换机配置：

sysname SW1
#
vlan batch 2 to 6
#
interface GigabitEthernet0/0/1
 port link-type access
 port default vlan 2
#
interface GigabitEthernet0/0/2
 port hybrid pvid vlan 3
 port hybrid untagged vlan 2 to 6
#
interface GigabitEthernet0/0/23
 port link-type trunk
 port trunk allow-pass vlan 2 to 6

sysname SW2
#
vlan batch 2 to 6
#
interface GigabitEthernet0/0/1
 port link-type access
 port default vlan 2
#
interface GigabitEthernet0/0/2
 port hybrid pvid vlan 4
 port hybrid untagged vlan 2 to 5
#
interface GigabitEthernet0/0/23
 port link-type trunk
 port trunk allow-pass vlan 2 to 6
#
interface GigabitEthernet0/0/24
 port hybrid tagged vlan 2 to 6

sysname SW3
#
vlan batch 2 to 6
#
interface GigabitEthernet0/0/1
 port hybrid pvid vlan 5
 port hybrid untagged vlan 2 to 5
#
interface GigabitEthernet0/0/2
 port hybrid pvid vlan 6
 port hybrid untagged vlan 2 to 3 6
#
interface GigabitEthernet0/0/23
 port hybrid tagged vlan 2 to 6

3.2路由部分的配置

sysname R1
#
interface GigabitEthernet0/0/0
 ip address 192.168.1.1 255.255.255.0 
 dhcp select interface
#
interface GigabitEthernet0/0/0.1
 dot1q termination vid 2
 ip address 192.168.2.1 255.255.255.0 
 arp broadcast enable
 dhcp select interface

SW1：
interface GigabitEthernet0/0/24
 port hybrid tagged vlan 2                VLAN 2 打标记
 port hybrid untagged vlan 3 to 6     VLAN 3to6 剥离标记

4.测试

 由上图可知我们已经达到实验要求！

总结：次实验中和路由器连接的那个接口还只能用hybrid接口来完成，本实验中的要求是PC1/3是一个网段，PC2/4/5/6是一个网段，本实验用的hybrid特性实现物理的隔离，还有一条查看命令：display port vlan active 此命令用来查看VLAN中包含的接口信息