extern "C" {
#endif
_LT_EOF
# Now generate the symbol file.
eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
cat <<_LT_EOF >> conftest.$ac_ext
/* The mapping between symbol names and symbols. */
const struct {
const char *name;
void *address;
popdef([AC_MSG_ERROR])
])# _LT_PROG_CXX
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([_LT_PROG_CXX], [])
# _LT_LANG_CXX_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
# the compiler configuration to `libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[AC_REQUIRE([_LT_PROG_CXX])dnl
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
AC_LANG_PUSH(C++)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(compiler_needs_object, $1)=no
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for C++ test sources.
ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test "$_lt_caught_CXX_error" != yes; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
lt_save_with_gnu_ld=$with_gnu_ld
lt_save_path_LD=$lt_cv_path_LD
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
$as_unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
lt_cv_path_LD=$lt_cv_path_LDCXX
else
$as_unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
if test "$GXX" = yes; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
if test "$GXX" = yes; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
wlarc='${wl}'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
_LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
with_gnu_ld=no
wlarc=
# A generic and very simple default shared library creation
# command for GNU C++ for the case where it uses the native
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
fi
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
else
GXX=no
with_gnu_ld=no
wlarc=
fi
# PORTME: fill in a description of your system's C++ link characteristics
AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
_LT_TAGVAR(ld_shlibs, $1)=yes
case $host_os in
aix3*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
# need to do runtime linking.
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
*-brtl*)
aix_use_runtimelinking=yes
break
;;
esac
done
;;
esac
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
_LT_TAGVAR(archive_cmds, $1)=''
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
if test "$GXX" = yes; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
# We have reworked collect2
:
else
# We have old collect2
_LT_TAGVAR(hardcode_direct, $1)=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=
fi
esac
shared_flag='-shared'
if test "$aix_use_runtimelinking" = yes; then
shared_flag="$shared_flag "'${wl}-G'
fi
else
# not using gcc
if test "$host_cpu" = ia64; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='${wl}-G'
else
shared_flag='${wl}-bM:SRE'
fi
fi
fi
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
# This is similar to how AIX traditionally builds its shared
# libraries.
_LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
beos*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
chorus*)
case $cc_basename in
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
cygwin* | mingw* | pw32* | cegcc*)
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
darwin* | rhapsody*)
_LT_DARWIN_LINKER_FEATURES($1)
;;
dgux*)
case $cc_basename in
ec++*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
ghcx*)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
freebsd[[12]]*)
# C++ shared libraries reported to be fairly broken before
# switch to ELF
_LT_TAGVAR(ld_shlibs, $1)=no
;;
freebsd-elf*)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
;;
freebsd* | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
gnu*)
;;
hpux9*)
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
;;
*)
if test "$GXX" = yes; then
_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
;;
esac
fi
case $host_cpu in
hppa*64*|ia64*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
# location of the library.
;;
esac
case $cc_basename in
CC*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
;;
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
case $host_cpu in
hppa*64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
;;
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
linux* | k*bsd*-gnu)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
_LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
icpc* | ecpc* )
# Intel C++
with_gnu_ld=yes
# version 8.0 and above of icpc choke on multiply defined symbols
# if we add $predep_objects and $postdep_objects, however 7.1 and
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
_LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
_LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
rm -rf $tpldir~
$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
compilen
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
_LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
fi
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
_LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
;;
esac
fi
;;
esac
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
# Note: We can NOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
tandem*)
case $cc_basename in
NCC*)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
;;
vxworks*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
*)
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
;;
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
_LT_TAGVAR(GCC, $1)="$GXX"
_LT_TAGVAR(LD, $1)="$LD"
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
CC=$lt_save_CC
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
fi # test "$_lt_caught_CXX_error" != yes
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
# compiler output when linking a shared library.
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
# Dependencies to place before and after the object being linked:
_LT_TAGVAR(predep_objects, $1)=
_LT_TAGVAR(postdep_objects, $1)=
_LT_TAGVAR(predeps, $1)=
_LT_TAGVAR(postdeps, $1)=
_LT_TAGVAR(compiler_lib_search_path, $1)=
dnl we can't use the lt_simple_compile_test_code here,
dnl because it contains code intended for an executable,
dnl not a library. It's possible we should let each
dnl tag define a new lt_????_link_test_code variable,
dnl but it's only used here...
m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
int a;
void foo (void) { a = 0; }
_LT_EOF
], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
class Foo
{
public:
Foo (void) { a = 0; }
private:
int a;
};
_LT_EOF
], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer*4 a
a=0
return
end
_LT_EOF
], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
subroutine foo
implicit none
integer a
a=0
return
end
_LT_EOF
], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
public class foo {
private int a;
public void bar (void) {
a = 0;
}
};
_LT_EOF
])
dnl Parse the compiler output and extract the necessary
dnl objects, libraries and library flags.
if AC_TRY_EVAL(ac_compile); then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
# Sentinel used to keep track of whether or not we are before
# the conftest object file.
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
case $p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
if test $p = "-L" ||
test $p = "-R"; then
prev=$p
continue
else
prev=
fi
if test "$pre_test_object_deps_done" = no; then
case $p in
-L* | -R*)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
_LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
else
_LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
fi
;;
# The "-l" case would never come before the object being
# linked, so don't bother handling this case.
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
_LT_TAGVAR(postdeps, $1)="${prev}${p}"
else
_LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
fi
fi
;;
*.$objext)
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
pre_test_object_deps_done=yes
continue
fi
if test "$pre_test_object_deps_done" = no; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
_LT_TAGVAR(predep_objects, $1)="$p"
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
_LT_TAGVAR(postdep_objects, $1)="$p"
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
fi
;;
*) ;; # Ignore the rest.
esac
done
# Clean up.
rm -f a.out a.exe
else
echo "libtool.m4: error: problem compiling $1 test program"
fi
$RM -f confest.$objext
# PORTME: override above test on systems where it is broken
m4_if([$1], [CXX],
[case $host_os in
interix[[3-9]]*)
# Interix 3.5 installs completely hosed .la files for C++, so rather than
# hack all around it, let's just trust "g++" to DTRT.
_LT_TAGVAR(predep_objects,$1)=
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
linux*)
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*)
# Sun C++ 5.9
# The more standards-conforming stlport4 library is
# incompatible with the Cstd library. Avoid specifying
# it if it's in CXXFLAGS. Ignore libCrun as
# -library=stlport4 depends on it.
case " $CXX $CXXFLAGS " in
*" -library=stlport4 "*)
solaris_use_stlport4=yes
;;
esac
if test "$solaris_use_stlport4" != yes; then
_LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
fi
;;
esac
;;
solaris*)
case $cc_basename in
CC*)
# The more standards-conforming stlport4 library is
# incompatible with the Cstd library. Avoid specifying
# it if it's in CXXFLAGS. Ignore libCrun as
# -library=stlport4 depends on it.
case " $CXX $CXXFLAGS " in
*" -library=stlport4 "*)
solaris_use_stlport4=yes
;;
esac
# Adding this requires a known-good setup of shared libraries for
# Sun compiler versions before 5.6, else PIC objects from an old
# archive will be linked into the output, leading to subtle bugs.
if test "$solaris_use_stlport4" != yes; then
_LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
fi
;;
esac
;;
esac
])
case " $_LT_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
_LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
_LT_TAGDECL([], [predep_objects], [1],
[Dependencies to place before and after the objects being linked to
create a shared library])
_LT_TAGDECL([], [postdep_objects], [1])
_LT_TAGDECL([], [predeps], [1])
_LT_TAGDECL([], [postdeps], [1])
_LT_TAGDECL([], [compiler_lib_search_path], [1],
[The library search path used internally by the compiler when linking
a shared library])
])# _LT_SYS_HIDDEN_LIBDEPS
# _LT_PROG_F77
# ------------
# Since AC_PROG_F77 is broken, in that it returns the empty string
# if there is no fortran compiler, we have our own version here.
m4_defun([_LT_PROG_F77],
[
pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
AC_PROG_F77
if test -z "$F77" || test "X$F77" = "Xno"; then
_lt_disable_F77=yes
fi
popdef([AC_MSG_ERROR])
])# _LT_PROG_F77
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([_LT_PROG_F77], [])
# _LT_LANG_F77_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_REQUIRE([_LT_PROG_F77])dnl
AC_LANG_PUSH(Fortran 77)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for f77 test sources.
ac_ext=f
# Object file extension for compiled f77 test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test "$_lt_disable_F77" != yes; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
CC=${F77-"f77"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
GCC=$G77
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)="$G77"
_LT_TAGVAR(LD, $1)="$LD"
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC="$lt_save_CC"
fi # test "$_lt_disable_F77" != yes
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
# _LT_PROG_FC
# -----------
# Since AC_PROG_FC is broken, in that it returns the empty string
# if there is no fortran compiler, we have our own version here.
m4_defun([_LT_PROG_FC],
[
pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
AC_PROG_FC
if test -z "$FC" || test "X$FC" = "Xno"; then
_lt_disable_FC=yes
fi
popdef([AC_MSG_ERROR])
])# _LT_PROG_FC
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([_LT_PROG_FC], [])
# _LT_LANG_FC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_REQUIRE([_LT_PROG_FC])dnl
AC_LANG_PUSH(Fortran)
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(allow_undefined_flag, $1)=
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(archive_expsym_cmds, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=no
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
_LT_TAGVAR(hardcode_libdir_separator, $1)=
_LT_TAGVAR(hardcode_minus_L, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=no
_LT_TAGVAR(inherit_rpath, $1)=no
_LT_TAGVAR(module_cmds, $1)=
_LT_TAGVAR(module_expsym_cmds, $1)=
_LT_TAGVAR(link_all_deplibs, $1)=unknown
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
_LT_TAGVAR(no_undefined_flag, $1)=
_LT_TAGVAR(whole_archive_flag_spec, $1)=
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
# Source file extension for fc test sources.
ac_ext=${ac_fc_srcext-f}
# Object file extension for compiled fc test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# No sense in running all these tests if we already determined that
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
if test "$_lt_disable_FC" != yes; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
return
end
"
# Code to be used in simple link tests
lt_simple_link_test_code="\
program t
end
"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
CC=${FC-"f95"}
compiler=$CC
GCC=$ac_cv_fc_compiler_gnu
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
if test -n "$compiler"; then
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
;;
esac
AC_MSG_RESULT([$enable_shared])
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
_LT_TAGVAR(LD, $1)="$LD"
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
_LT_SYS_HIDDEN_LIBDEPS($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_SYS_DYNAMIC_LINKER($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi # test -n "$compiler"
GCC=$lt_save_GCC
CC="$lt_save_CC"
fi # test "$_lt_disable_FC" != yes
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
# _LT_LANG_GCJ_CONFIG([TAG])
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
# Source file extension for Java test sources.
ac_ext=java
# Object file extension for compiled Java test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}"
# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
GCC=yes
CC=${GCJ-"gcj"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_TAGVAR(LD, $1)="$LD"
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
if test -n "$compiler"; then
_LT_COMPILER_NO_RTTI($1)
_LT_COMPILER_PIC($1)
_LT_COMPILER_C_O($1)
_LT_COMPILER_FILE_LOCKS($1)
_LT_LINKER_SHLIBS($1)
_LT_LINKER_HARDCODE_LIBPATH($1)
_LT_CONFIG($1)
fi
AC_LANG_RESTORE
GCC=$lt_save_GCC
CC="$lt_save_CC"
])# _LT_LANG_GCJ_CONFIG
# _LT_LANG_RC_CONFIG([TAG])
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
# to write the compiler configuration to `libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
# Source file extension for RC test sources.
ac_ext=rc
# Object file extension for compiled RC test sources.
objext=o
_LT_TAGVAR(objext, $1)=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
lt_simple_link_test_code="$lt_simple_compile_test_code"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
# save warnings/boilerplate of simple test code
_LT_COMPILER_BOILERPLATE
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
lt_save_GCC=$GCC
GCC=
CC=${RC-"windres"}
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
_LT_CC_BASENAME([$compiler])
_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
if test -n "$compiler"; then
:
_LT_CONFIG($1)
fi
GCC=$lt_save_GCC
AC_LANG_RESTORE
CC="$lt_save_CC"
])# _LT_LANG_RC_CONFIG
# LT_PROG_GCJ
# -----------
AC_DEFUN([LT_PROG_GCJ],
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
# Old name:
AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
# LT_PROG_RC
# ----------
AC_DEFUN([LT_PROG_RC],
[AC_CHECK_TOOL(RC, windres,)
])
# Old name:
AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_RC], [])
# _LT_DECL_EGREP
# --------------
# If we don't have a new enough Autoconf to choose the best grep
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
_LT_DECL([], [EGREP], [1], [An ERE matcher])
_LT_DECL([], [FGREP], [1], [A literal string matcher])
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])
# _LT_DECL_OBJDUMP
# --------------
# If we don't have a new enough Autoconf to choose the best objdump
# available, choose the one first in the user's PATH.
m4_defun([_LT_DECL_OBJDUMP],
[AC_CHECK_TOOL(OBJDUMP, objdump, false)
test -z "$OBJDUMP" && OBJDUMP=objdump
_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
AC_SUBST([OBJDUMP])
])
# _LT_DECL_SED
# ------------
# Check for a fully-functional sed program, that truncates
# as few characters as possible. Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
test -z "$SED" && SED=sed
Xsed="$SED -e 1s/^X//"
_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
[Sed that helps us avoid accidentally triggering echo(1) options like -n])
])# _LT_DECL_SED
m4_ifndef([AC_PROG_SED], [
# NOTE: This macro has been submitted for inclusion into #
# GNU Autoconf as AC_PROG_SED. When it is available in #
# a released version of Autoconf we should remove this #
# macro and use it instead. #
m4_defun([AC_PROG_SED],
[AC_MSG_CHECKING([for a sed that does not truncate output])
AC_CACHE_VAL(lt_cv_path_SED,
[# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
IFS=$as_save_IFS
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
test ! -f $lt_ac_sed && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
break
fi
while true; do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
test $lt_ac_count -gt 10 && break
lt_ac_count=`expr $lt_ac_count + 1`
if test $lt_ac_count -gt $lt_ac_max; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
done
done
])
SED=$lt_cv_path_SED
AC_SUBST([SED])
AC_MSG_RESULT([$SED])
])#AC_PROG_SED
])#m4_ifndef
# Old name:
AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
dnl aclocal-1.4 backwards compatibility:
dnl AC_DEFUN([LT_AC_PROG_SED], [])
# _LT_CHECK_SHELL_FEATURES
# ------------------------
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
# Try some XSI features
xsi_shell=no
( _lt_dummy="a/b/c"
test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
= c,a/b,, \
&& eval 'test $(( 1 + 1 )) -eq 2 \
&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
&& xsi_shell=yes
AC_MSG_RESULT([$xsi_shell])
_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
AC_MSG_CHECKING([whether the shell understands "+="])
lt_shell_append=no
( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
>/dev/null 2>&1 \
&& lt_shell_append=yes
AC_MSG_RESULT([$lt_shell_append])
_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
fi
_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
# test EBCDIC or ASCII
case `echo X|tr X '\101'` in
A) # ASCII based system
# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
lt_SP2NL='tr \040 \012'
lt_NL2SP='tr \015\012 \040\040'
;;
*) # EBCDIC based system
lt_SP2NL='tr \100 \n'
lt_NL2SP='tr \r\n \100\100'
;;
esac
_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
])# _LT_CHECK_SHELL_FEATURES
# _LT_PROG_XSI_SHELLFNS
# ---------------------
# Bourne and XSI compatible variants of some useful shell functions.
m4_defun([_LT_PROG_XSI_SHELLFNS],
[case $xsi_shell in
yes)
cat << \_LT_EOF >> "$cfgfile"
# func_dirname file append nondir_replacement
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
case ${1} in
*/*) func_dirname_result="${1%/*}${2}" ;;
* ) func_dirname_result="${3}" ;;
esac
}
# func_basename file
func_basename ()
{
func_basename_result="${1##*/}"
}
# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
# dirname: Compute the dirname of FILE. If nonempty,
# add APPEND to the result, otherwise set result
# to NONDIR_REPLACEMENT.
# value returned in "$func_dirname_result"
# basename: Compute filename of FILE.
# value retuned in "$func_basename_result"
# Implementation must be kept synchronized with func_dirname
# and func_basename. For efficiency, we do not delegate to
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
case ${1} in
*/*) func_dirname_result="${1%/*}${2}" ;;
* ) func_dirname_result="${3}" ;;
esac
func_basename_result="${1##*/}"
}
# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
func_stripname ()
{
# pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
# positional parameters, so assign one to ordinary parameter first.
func_stripname_result=${3}
func_stripname_result=${func_stripname_result#"${1}"}
func_stripname_result=${func_stripname_result%"${2}"}
}
# func_opt_split
func_opt_split ()
{
func_opt_split_opt=${1%%=*}
func_opt_split_arg=${1#*=}
}
# func_lo2o object
func_lo2o ()
{
case ${1} in
*.lo) func_lo2o_result=${1%.lo}.${objext} ;;
*) func_lo2o_result=${1} ;;
esac
}
# func_xform libobj-or-source
func_xform ()
{
func_xform_result=${1%.*}.lo
}
# func_arith arithmetic-term...
func_arith ()
{
func_arith_result=$(( $[*] ))
}
# func_len string
# STRING may not start with a hyphen.
func_len ()
{
func_len_result=${#1}
}
_LT_EOF
;;
*) # Bourne compatible functions.
cat << \_LT_EOF >> "$cfgfile"
# func_dirname file append nondir_replacement
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
func_dirname ()
{
# Extract subdirectory from the argument.
func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
if test "X$func_dirname_result" = "X${1}"; then
func_dirname_result="${3}"
else
func_dirname_result="$func_dirname_result${2}"
fi
}
# func_basename file
func_basename ()
{
func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}
dnl func_dirname_and_basename
dnl A portable version of this function is already defined in general.m4sh
dnl so there is no need for it here.
# func_stripname prefix suffix name
# strip PREFIX and SUFFIX off of NAME.
# PREFIX and SUFFIX must not contain globbing or regex special
# characters, hashes, percent signs, but SUFFIX may contain a leading
# dot (in which case that matches only a dot).
# func_strip_suffix prefix name
func_stripname ()
{
case ${2} in
.*) func_stripname_result=`$ECHO "X${3}" \
| $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
*) func_stripname_result=`$ECHO "X${3}" \
| $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
esac
}
# sed scripts:
my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
my_sed_long_arg='1s/^-[[^=]]*=//'
# func_opt_split
func_opt_split ()
{
func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
}
# func_lo2o object
func_lo2o ()
{
func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
}
# func_xform libobj-or-source
func_xform ()
{
func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
}
# func_arith arithmetic-term...
func_arith ()
{
func_arith_result=`expr "$[@]"`
}
# func_len string
# STRING may not start with a hyphen.
func_len ()
{
# func_append var value
# Append VALUE to the end of shell variable VAR.
func_append ()
{
eval "$[1]=\$$[1]\$[2]"
}
_LT_EOF
;;
esac
])
# Helper functions for option handling. -*- Autoconf -*-
#
# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
12-23
454
![](https://csdnimg.cn/release/blogv2/dist/pc/img/readCountBlack.png)
11-15
1118
![](https://csdnimg.cn/release/blogv2/dist/pc/img/readCountBlack.png)
03-22
04-01
1万+
![](https://csdnimg.cn/release/blogv2/dist/pc/img/readCountBlack.png)