蓝桥杯单片机第9届彩灯控制

 

 

 

 main.c

#include "sys.h"
#include "iic.h"

void Save_Config();
void main()
{
	InitSystem();
	Timer0Init();
	Timer1Init();
	interval[0] = Read_AT24C02(0x01)*10;
	interval[1] = Read_AT24C02(0x02)*10;
	interval[2] = Read_AT24C02(0x03)*10;
	interval[3] = Read_AT24C02(0x04)*10;
	while(1)
	{
		
//		DisplayBit(0,interval[0] / 100);
//		DisplayBit(1,interval[0] / 10 % 10);
		KeyScans();
		DisplaySMG();
		OperatePWM();
		if(k7)
			Select_Led();
		else
			OperateLed(0xff);
		if(interface == 0)
			Save_Config();
	}
}

void Save_Config()
{
	switch(mode)
	{
		case 1: Write_AT24C02(0x01,interval[mode - 1] / 10); break;
		case 2: Write_AT24C02(0x02,interval[mode - 1] / 10); break;
		case 3: Write_AT24C02(0x03,interval[mode - 1] / 10); break;
		case 4: Write_AT24C02(0x04,interval[mode - 1] / 10); break;
	}
	Delay(10);
}

sys.c

#include "sys.h"

void Select_74HC138(uchar channel)
{
	switch(channel)
	{
		case 0: P2 = P2 & 0X1F; break;
		case 4: P2 = (P2 & 0X1F) | 0X80; break;
		case 5: P2 = (P2 & 0X1F) | 0XA0; break;
		case 6: P2 = (P2 & 0X1F) | 0XC0; break;
		case 7: P2 = (P2 & 0X1F) | 0XE0; break;
	}
}

void InitSystem()
{
	Select_74HC138(4);
	P0 = 0XFF;
	Select_74HC138(5);
	P0 = 0X00;
	Select_74HC138(0);
}

void Delay(uint ms)
{
	uint i;
	for(ms; ms > 0; ms--)
		for(i = 921; i > 0; i--);
}

uchar t0 = 0;
uchar smg = 0;
uchar count = 0;
uchar stat_led = 0;

void Timer0Init()		//50毫秒@12MHz
{
	AUXR &= 0x7F;		//定时器时钟12T模式
	TMOD &= 0xF0;		//设置定时器模式
	TL0 = 0xB0;		//设置定时初值
	TH0 = 0x3C;		//设置定时初值
	TF0 = 0;		//清除TF0标志
	TR0 = 1;		//定时器0开始计时
	ET0 = 1;
	EA = 1;
}

void ServiceTimer0() interrupt 1   //800ms
{
	if(interface != 0)
		t0++;
	if(t0 == 16)
	{
		t0 = 0;
		smg = !smg;
	}
	if(k7)
		count++;
	if(count >= interval[mode - 1] / 50)  // 50ms   =     400ms
	{
		stat_led++;
		count = 0;
	}
}

uchar pwm_count = 0;
uchar led = 0;

void Timer1Init()		//100微秒@12.000MHz
{
	AUXR &= 0xBF;		//定时器时钟12T模式
	TMOD &= 0x0F;		//设置定时器模式
	TL1 = 0x9C;		//设置定时初值
	TH1 = 0xFF;		//设置定时初值
	TF1 = 0;		//清除TF1标志
	TR1 = 1;		//定时器1开始计时
	ET1 = 1;
	EA = 1;
}

void ServiceTimer1() interrupt 3
{
	pwm_count++;
	if(pwm_count < pwm_duty)
	{
		led = 1;
	}
	else if(pwm_count > pwm_duty)
	{
		led = 0;
	}
	else if(pwm_count >= 100)
	{
		pwm_count = 0;
		led = 1;
	}
}

nixie.c

#include "sys.h"

uchar code nixie[] = {0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xbf,0xff};

uint interval[4] = {400,400,400,400};
uchar mode = 1;
uchar interface = 0;

void DisplayBit(uchar pos,value)
{
	P0 = 0X00;
	Select_74HC138(6);
	Select_74HC138(0);
	
	P0 = nixie[value];
	Select_74HC138(7);
	Select_74HC138(0);
	
	P0 = _crol_(0x01, pos);
	Select_74HC138(6);
	Select_74HC138(0);
	
	Delay(1);
}

void DisplaySMG()
{
	switch(interface)
	{
		case 0:
			P0 = 0X00;
			Select_74HC138(6);
			Select_74HC138(0);
			break;
		case 1:
			if(smg)
			{
				DisplayBit(0,0);
				DisplayBit(1,mode);
				DisplayBit(2,0);
			}
			else
			{
				P0 = 0X00;
				Select_74HC138(6);
				Select_74HC138(0);
			}
			
			break;
		case 2: 
			if(smg)
			{
				if(interval[mode - 1] > 999)
					DisplayBit(4,interval[mode - 1] / 1000);
				else
				{
					DisplayBit(5,interval[mode - 1] / 100 % 10);
					DisplayBit(6,interval[mode - 1] / 10 % 10);
					DisplayBit(7,interval[mode - 1] % 10);
				}
				
			}
			else
			{
				P0 = 0X00;
				Select_74HC138(6);
				Select_74HC138(0);
			}
			break;
	}
}

 led.c

#include "sys.h"
#include "iic.h"

uchar led_mode[] = {0xfe, 0xfd, 0xfb, 0xf7, 0xef, 0xdf, 0xbf, 0x7f,
			      // 0     1      2     3     4    5     6     7
					0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0xfe,
				  // 8     9      10    11    12   13     14    15
					0x7e, 0xbd, 0xdb, 0xe7, 0xe7, 0xdb, 0xbd, 0x7e};
				 //   16    17   18    19    20   21     22    23

uchar level;
uchar pwm_duty;					

void OperateLed(uchar dat)
{
	P0 = dat;
	Select_74HC138(4);
	Select_74HC138(0);
}
					
void Select_Led()
{
	if(mode == 1)
	{
		if(stat_led > 7)
			stat_led = 0;
		if(led)
			OperateLed(led_mode[stat_led]);
		else
			OperateLed(0xff);
	}
	else if(mode == 2)
	{
		if(stat_led < 8 || stat_led > 15)
			stat_led = 8;
		if(led)
			OperateLed(led_mode[stat_led]);
		else
			OperateLed(0xff);
	}
	else if(mode == 3)
	{
		if(stat_led < 16 || stat_led > 19)
			stat_led = 16;
		if(led)
			OperateLed(led_mode[stat_led]);
		else
			OperateLed(0xff);
	}
	else if(mode == 4)
	{
		if(stat_led < 20 || stat_led > 23)
			stat_led = 20;
		if(led)
			OperateLed(led_mode[stat_led]);
		else
			OperateLed(0xff);
	}
}	

void OperatePWM()
{
	ReadAIN3();
	if(rb2 <= 64)
	{
		level = 1;
		pwm_duty = 25;
	}
	else if((rb2 > 64) && (rb2 <= 128))
	{
		level = 2;
		pwm_duty = 50;
	}
	else if((rb2 > 128) && (rb2 <= 192))
	{
		level = 3;
		pwm_duty = 75;
	}
	else if((rb2 > 192) && (rb2 < 255))
	{
		level = 4;
		pwm_duty = 100;
	}
}

key.c

#include "sys.h"
bit k7 = 0;

void KeyScans()
{
	if(s4 == 0)
	{
		Delay(10);
		if(interface == 1)
		{
			mode--;
			if(mode == -1)
				mode = 4;
		}
		else if(interface == 2)
		{
			interval[mode - 1] -= 100;
			if(interval[mode - 1] == 300)
				interval[mode - 1] = 400;
		}
		while(s4 == 0)
		{
			if(interface == 0)
			{
				DisplayBit(6,level / 10);
				DisplayBit(7,level % 10);
			}
			else
			{
				DisplaySMG();
			}
			if(k7 == 1)
				Select_Led();
			
		}
	}
	if(s5 == 0)
	{
		Delay(10);
		if(interface == 1)
		{
			mode++;
			if(mode == 5)
				mode = 1;
		}
		else if(interface == 2)
		{
			interval[mode - 1] += 100;
			if(interval[mode - 1] > 1200)
				interval[mode - 1] = 1200;
		}
		while(s5 == 0)
		{
			DisplaySMG();
			if(k7 == 1)
				Select_Led();
		}
	}
	if(s6 == 0)
	{
		Delay(10);
		interface = (interface + 1) % 3;
		while(s6 == 0)
		{
			DisplaySMG();
			if(k7 == 1)
				Select_Led();
		}
	}
	if(s7 == 0)
	{
		Delay(10);
		k7 = ~k7;
		while(s7 == 0)
		{
			DisplaySMG();
			Select_Led();
		}
	}
}

sys.h

#ifndef _SYS_H_
#define _SYS_H_

#include <STC15F2K60S2.H>
#include <intrins.h>

sbit s4 = P3^3;
sbit s5 = P3^2;
sbit s6 = P3^1;
sbit s7 = P3^0;

#define uchar unsigned char
#define uint unsigned int
	
extern unsigned int interval[4];
extern unsigned char mode;
extern unsigned char interface;
extern unsigned char smg;
extern unsigned char stat_led;
extern unsigned char pwm_duty;
extern unsigned char led;
extern bit k7;
extern unsigned char level;

//sys.c
void Select_74HC138(unsigned char channel);
void InitSystem();
void Delay(unsigned int ms);
void Timer0Init();
void Timer1Init();

//nixie.c
void DisplayBit(unsigned char pos,value);
void DisplaySMG();

//key.c
void KeyScans();
void Save_Config();

//led.c
void OperateLed(unsigned char dat);
void Select_Led();
void OperatePWM();

#endif