<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]display ip int
[Huawei]display ip interface br
[Huawei]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 1
The number of interface that is DOWN in Physical is 3
The number of interface that is UP in Protocol is 1
The number of interface that is DOWN in Protocol is 3
Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 unassigned down down
GigabitEthernet0/0/1 unassigned down down
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)
[Huawei]
[Huawei]
[Huawei]
Nov 28 2022 20:59:58-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
[Huawei]
Nov 28 2022 21:00:23-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
[Huawei]sys r1
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip address 172.16.32.2 19
Nov 28 2022 21:02:37-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip ad
[r1-GigabitEthernet0/0/1]ip address 172.16.64.1 24
Nov 28 2022 21:02:49-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r1-GigabitEthernet0/0/1]ip ad
[r1-GigabitEthernet0/0/1]ip address 172.16.64.1 19
[r1-GigabitEthernet0/0/1]undo int
[r1-GigabitEthernet0/0/1]qu
[r1]undo in
[r1]undo info-center
[r1]undo interface g0/0/1
Error: Cannot delete this interface.
[r1]user
[r1]user-bind
[r1]user-group
[r1]user-interface con
[r1]user-interface console 0
[r1-ui-console0]id
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]
[r1-ui-console0]
[r1-ui-console0]qu
[r1]osp
[r1]ospf 1 rou
[r1]int
[r1]interface
[r1]interface lo
[r1]interface LoopBack 0
[r1-LoopBack0]ip ad
[r1-LoopBack0]ip address 1.1.1.1 32
[r1-LoopBack0]qu
[r1]ospf 1 rout
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]ar
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]net
[r1-ospf-1-area-0.0.0.0]network 172.16.32.2 0.0.0.0
[r1-ospf-1-area-0.0.0.0]net
[r1-ospf-1-area-0.0.0.0]network 172
^
Error: Wrong parameter found at '^' position.
[r1-ospf-1-area-0.0.0.0]network 172.16.64.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]net
[r1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:24:46-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:24:49-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:24:49-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:24:49-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:24:49-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:03-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r1-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-1-area-0.0.0.0]qu
[r1-ospf-1]qu
[r1]user
[r1]user-bind
[r1]user-group
[r1]user-interface con
[r1]user-interface console 0
[r1-ui-console0]id
[r1-ui-console0]idle-timeout
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]qu
[r1]ospf 1
[r1-ospf-1]area
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]net
[r1-ospf-1-area-0.0.0.1]network 172.16.32.2 0.0.0.0
Error: The specified network command has been occupied by another area or proces
s.
[r1-ospf-1-area-0.0.0.1]network 172.16.64.1 0.0.0.0
Error: The specified network command has been occupied by another area or proces
s.
[r1-ospf-1-area-0.0.0.1]qu
[r1-ospf-1]qu
[r1]user
[r1]user-bind
[r1]user-group
[r1]user-interface con
[r1]user-interface console 0
[r1-ui-console0]id
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]
Nov 28 2022 22:46:43-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[14]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Rece
ived, NeighborChangeTime=2022-11-28 22:46:43-08:00)
[r1-ui-console0]
Nov 28 2022 22:46:43-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r1-ui-console0]
Nov 28 2022 22:46:51-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r1-ui-console0]
Nov 28 2022 22:46:51-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r1-ui-console0]
Nov 28 2022 22:46:51-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r1-ui-console0]
Nov 28 2022 22:46:51-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ui-console0]
Nov 28 2022 22:46:59-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[20]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=3.3.3.3, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Rece
ived, NeighborChangeTime=2022-11-28 22:46:59-08:00)
[r1-ui-console0]
Nov 28 2022 22:46:59-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r1-ui-console0]
Nov 28 2022 22:47:01-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r1-ui-console0]
Nov 28 2022 22:47:01-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r1-ui-console0]
Nov 28 2022 22:47:01-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r1-ui-console0]
Nov 28 2022 22:47:01-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ui-console0]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r2
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad
[r2-GigabitEthernet0/0/0]ip address 172.16.64.2 19
Nov 28 2022 21:04:13-08:00 r2 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip ad
[r2-GigabitEthernet0/0/1]ip address 172.16.96.1 19
Nov 28 2022 21:04:32-08:00 r2 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]qu
[r2]user
[r2]user-bind
[r2]user-group
[r2]user-interface con
[r2]user-interface console 0
[r2-ui-console0]id
[r2-ui-console0]idle-timeout 0 0
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>sys
Enter system view, return user view with Ctrl+Z.
[r2]int
[r2]interface lo
[r2]interface LoopBack 0
[r2-LoopBack0]ip ad
[r2-LoopBack0]ip address 2.2.2.2 32
[r2-LoopBack0]qu
[r2]ospf 1 rou
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]are
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]net
[r2-ospf-1-area-0.0.0.0]network 172.16.64.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]net
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neighb
orEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r2-ospf-1-area-0.0.0.0]network 172
Nov 28 2022 22:26:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-ospf-1-area-0.0.0.0]network 172.16.96.1 0.0.0.0
[r2-ospf-1-area-0.0.0.0]net
[r2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]
[r2-ospf-1-area-0.0.0.0]qu
[r2-ospf-1]qu
[r2]user
[r2]user-bind
[r2]user-group
[r2]user-interface con
[r2]user-interface console 0
[r2-ui-console0]id
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]qu
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]os
[r2-GigabitEthernet0/0/0]ospf dr
[r2-GigabitEthernet0/0/0]ospf dr-priority 0
Nov 28 2022 22:46:42-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[12]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r2-GigabitEthernet0/0/0]
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:42-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[13]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-28 22:46:42-08:00)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:42-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[14]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=3.3.3.3, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:42-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[15]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=3.3.3.3, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-28 22:46:42-08:00)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:50-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:50-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:50-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:50-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:50-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:50-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:58-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[28]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=3.3.3.3, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Rece
ived, NeighborChangeTime=2022-11-28 22:46:58-08:00)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:46:58-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:47:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-GigabitEthernet0/0/0]
Nov 28 2022 22:47:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[31]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=3.64.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r2-GigabitEthernet0/0/0]qu
[r2]user
[r2]user-bind
[r2]user-group
[r2]user-interface con
[r2]user-interface console 0
[r2-ui-console0]id
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]
<Huawei>sys
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r3
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip ad
[r3-GigabitEthernet0/0/0]ip address 172.16.64.3 19
Nov 28 2022 21:04:52-08:00 r3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip ad
[r3-GigabitEthernet0/0/1]ip address 172.16.128.1 19
Nov 28 2022 21:05:07-08:00 r3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]qu
[r3]user
[r3]user-bind
[r3]user-group
[r3]user-interface con
[r3]user-interface console 0
[r3-ui-console0]id
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]
[r3-ui-console0]
[r3-ui-console0]qu
[r3]int
[r3]interface lo
[r3]interface LoopBack 0
[r3-LoopBack0]ip
[r3-LoopBack0]ip ad
[r3-LoopBack0]ip address 3.3.3.3 32
[r3-LoopBack0]qu
[r3]ospf 1 rou
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]are
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]net
[r3-ospf-1-area-0.0.0.0]network 172.16.64.3
^
Error:Incomplete command found at '^' position.
[r3-ospf-1-area-0.0.0.0]network 172.16.64.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]ne
Nov 28 2022 22:24:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-1-area-0.0.0.0]ne
Nov 28 2022 22:24:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r3-ospf-1-area-0.0.0.0]net
Nov 28 2022 22:24:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r3-ospf-1-area-0.0.0.0]net
Nov 28 2022 22:24:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-ospf-1-area-0.0.0.0]net
[r3-ospf-1-area-0.0.0.0]network
Nov 28 2022 22:24:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-ospf-1-area-0.0.0.0]network
Nov 28 2022 22:24:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-1-area-0.0.0.0]network 172.16.128.1 0.0.0.0
[r3-ospf-1-area-0.0.0.0]net
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:03-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r3-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-ospf-1-area-0.0.0.0]
Nov 28 2022 22:26:08-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-1-area-0.0.0.0]user
[r3-ospf-1-area-0.0.0.0]user
[r3-ospf-1-area-0.0.0.0]user
[r3-ospf-1-area-0.0.0.0]qu
[r3-ospf-1-area-0.0.0.0]quit
[r3-ospf-1]qu
[r3]user
[r3]user-bind
[r3]user-group
[r3]user-interface con
[r3]user-interface console 0
[r3-ui-console0]id
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]
Nov 28 2022 22:46:43-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[19]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Rece
ived, NeighborChangeTime=2022-11-28 22:46:43-08:00)
[r3-ui-console0]
Nov 28 2022 22:46:43-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r3-ui-console0]
Nov 28 2022 22:46:45-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r3-ui-console0]
Nov 28 2022 22:46:45-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-ui-console0]
Nov 28 2022 22:46:45-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-ui-console0]
Nov 28 2022 22:46:45-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ui-console0]i
^
Error:Incomplete command found at '^' position.
[r3-ui-console0]
[r3-ui-console0]qu
[r3]int
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]os
[r3-GigabitEthernet0/0/0]ospf dr
[r3-GigabitEthernet0/0/0]ospf dr-priority 0
Nov 28 2022 22:46:59-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[25]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r3-GigabitEthernet0/0/0]
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:46:59-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[26]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-28 22:46:59-08:00)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:46:59-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[27]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=2.2.2.2, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:46:59-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[28]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-28 22:46:59-08:00)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:01-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:01-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:01-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[31]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:01-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[32]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:01-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[33]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:01-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[34]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.64.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[35]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[36]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r3-GigabitEthernet0/0/0]
Nov 28 2022 22:47:04-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[37]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.64.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r3-GigabitEthernet0/0/0]qu
[r3]user
[r3]user-bind
[r3]user-group
[r3]user-interface con
[r3]user-interface console 0
[r3-ui-console0]id
[r3-ui-console0]idle-timeout 0 0
[r3-ui-console0]qu
[r3]acl 3000
[r3-acl-adv-3000]ru
[r3-acl-adv-3000]rule de
[r3-acl-adv-3000]rule deny t
[r3-acl-adv-3000]rule deny tcp s
[r3-acl-adv-3000]rule deny tcp source 192.168.3.1 0.0.0.0 d
[r3-acl-adv-3000]rule deny tcp source 192.168.3.1 0.0.0.0 destination 172.16.32.
1 0.0.0.0
[r3-acl-adv-3000]qu
[r3]int g0/0/1
[r3-GigabitEthernet0/0/1]tr
[r3-GigabitEthernet0/0/1]traffic-policy in
[r3-GigabitEthernet0/0/1]traffic-
[r3-GigabitEthernet0/0/1]traffic-filterou
[r3-GigabitEthernet0/0/1]traffic-filter ou
[r3-GigabitEthernet0/0/1]traffic-filter outbound acl 3000
[r3-GigabitEthernet0/0/1]
<Huawei>
Nov 28 2022 21:55:56-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Nov 28 2022 21:55:56-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r4
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ip ad
[r4-GigabitEthernet0/0/0]ip address 172.16.128.2 19
Nov 28 2022 21:56:45-08:00 r4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r4-GigabitEthernet0/0/0]qu
[r4]user
[r4]user-bind
[r4]user-group
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]id
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]
[r4-ui-console0]qu
[r4]int
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]do
[r4-GigabitEthernet0/0/1.1]dot1q tr
[r4-GigabitEthernet0/0/1.1]dot1q te
[r4-GigabitEthernet0/0/1.1]dot1q termination vid 2
[r4-GigabitEthernet0/0/1.1]ip ad
[r4-GigabitEthernet0/0/1.1]ip address 192.168.3.1 24
Nov 28 2022 22:00:24-08:00 r4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1.1 has entered the UP state.
[r4-GigabitEthernet0/0/1.1]int g0/0/1.2
[r4-GigabitEthernet0/0/1.2]do
[r4-GigabitEthernet0/0/1.2]dot1q te
[r4-GigabitEthernet0/0/1.2]dot1q termination v
[r4-GigabitEthernet0/0/1.2]dot1q termination vid 3
[r4-GigabitEthernet0/0/1.2]ip
[r4-GigabitEthernet0/0/1.2]ip ad
[r4-GigabitEthernet0/0/1.2]ip address 192.168.4.1 24
[r4-GigabitEthernet0/0/1.2]
Nov 28 2022 22:00:46-08:00 r4 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/1.2 has entered the UP state.
[r4-GigabitEthernet0/0/1.2]qu
[r4]dh
[r4]dhcp en
[r4]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r4]ip
[r4]ip po
[r4]ip pool
[r4]ip pool 1
Info: It's successful to create an IP address pool.
[r4-ip-pool-1]net
[r4-ip-pool-1]network 192.168.3.0 ma
[r4-ip-pool-1]network 192.168.3.0 mask 24
[r4-ip-pool-1]ga
[r4-ip-pool-1]gateway-list 192.168.3.1
[r4-ip-pool-1]dns
[r4-ip-pool-1]dns-list 8.8.8.8
[r4-ip-pool-1]qu
[r4]ip po
[r4]ip policy-based-route
[r4]ip pool 2
Info: It's successful to create an IP address pool.
[r4-ip-pool-2]net
[r4-ip-pool-2]netbios-type
[r4-ip-pool-2]network 192.168.4.0 ma
[r4-ip-pool-2]network 192.168.4.0 mask 24
[r4-ip-pool-2]ga
[r4-ip-pool-2]gateway-list 192.168.4.1
[r4-ip-pool-2]dns
[r4-ip-pool-2]dns-list 8.8.8.8
[r4-ip-pool-2]qu
[r4]int
[r4]interface g0/0/1.1
[r4-GigabitEthernet0/0/1.1]dh
[r4-GigabitEthernet0/0/1.1]dhcp en
[r4-GigabitEthernet0/0/1.1]dhcp s
[r4-GigabitEthernet0/0/1.1]dhcp select g
[r4-GigabitEthernet0/0/1.1]dhcp select global
[r4-GigabitEthernet0/0/1.1]int
[r4-GigabitEthernet0/0/1.1]int g0/0/1.2
[r4-GigabitEthernet0/0/1.2]dh
[r4-GigabitEthernet0/0/1.2]dhcp s
[r4-GigabitEthernet0/0/1.2]dhcp selectg
[r4-GigabitEthernet0/0/1.2]dhcp select
[r4-GigabitEthernet0/0/1.2]dhcp select g
[r4-GigabitEthernet0/0/1.2]dhcp select global
[r4-GigabitEthernet0/0/1.2]
[r4-GigabitEthernet0/0/1.2]
[r4-GigabitEthernet0/0/1.2]
[r4-GigabitEthernet0/0/1.2]qu
[r4]user
[r4]user-bind
[r4]user-group
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]id
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]qu
[r4]int
[r4]interface lo
[r4]interface LoopBack 0
[r4-LoopBack0]ip ad
[r4-LoopBack0]ip address 4.4.4.4 32
[r4-LoopBack0]qu
[r4]ospf
[r4]ospf
[r4-ospf-1]ar
[r4-ospf-1]a
[r4-ospf-1]area 3
[r4-ospf-1-area-0.0.0.3]net
[r4-ospf-1-area-0.0.0.3]network 172.16.128.2 0.0.0.0
[r4-ospf-1-area-0.0.0.3]net
[r4-ospf-1-area-0.0.0.3]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.3]qu
[r4-ospf-1]qu
[r4]usrr
[r4]us
[r4]user-bind
[r4]user-group
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]id
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]qu
[r4]acl 3000
[r4-acl-adv-3000]rule 2 de
[r4-acl-adv-3000]rule 2 deny icmp so
[r4-acl-adv-3000]rule 2 deny icmp source 192.168.4.254 0.0.0.0 de
[r4-acl-adv-3000]rule 2 deny icmp source 192.168.4.254 0.0.0.0 destination 192.1
68.2.254 0.0.0.0
[r4-acl-adv-3000]qu
[r4]int
[r4]interface g0/0/1
[r4-GigabitEthernet0/0/1]tr
[r4-GigabitEthernet0/0/1]tracert
[r4-GigabitEthernet0/0/1]traffic-filter in
[r4-GigabitEthernet0/0/1]traffic-filter ou
[r4-GigabitEthernet0/0/1]traffic-filter outbound acl 3000
[r4-GigabitEthernet0/0/1]qu
[r4]us
[r4]user-bind
[r4]user-group
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]id
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]qu
[r4]acl 3000
[r4-acl-adv-3000]rule d
[r4-acl-adv-3000]rule deny t
[r4-acl-adv-3000]rule deny tcp so
[r4-acl-adv-3000]qu
[r4]user
[r4]user-group
[r4]user-interface
[r4]user-
[r4]user-group
[r4]user-interfacecon
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]id
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]qu
[r4]user
[r4]user-bind
[r4]user-group
[r4]user-interface v
[r4]user-interface vty 0 4
[r4-ui-vty0-4]au
[r4-ui-vty0-4]authentication-mode pa
[r4-ui-vty0-4]authentication-mode password
Please configure the login password (maximum length 16):123
[r4-ui-vty0-4]qu
[r4]qu
<r4>sysy
^
Error: Unrecognized command found at '^' position.
<r4>sys
Enter system view, return user view with Ctrl+Z.
[r4]user
[r4]user-bind
[r4]user-group
[r4]user-interface con
[r4]user-interface console 0
[r4-ui-console0]id
[r4-ui-console0]idle-timeout 0 0
[r4-ui-console0]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r6
[r6]int g0/0/0
[r6-GigabitEthernet0/0/0]ip ad
[r6-GigabitEthernet0/0/0]ip address
^
Error:Incomplete command found at '^' position.
[r6-GigabitEthernet0/0/0]ip address 10.1.1.2 24
Nov 28 2022 21:01:49-08:00 r6 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r6-GigabitEthernet0/0/0]int g0/0/1
[r6-GigabitEthernet0/0/1]ip ad
[r6-GigabitEthernet0/0/1]ip address 172.16.32.1 19
Nov 28 2022 21:02:16-08:00 r6 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r6-GigabitEthernet0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>
<r6>sys
Enter system view, return user view with Ctrl+Z.
[r6]user
[r6]user-bind
[r6]user-group
[r6]user-interface con
[r6]user-interface console 0
[r6-ui-console0]id
[r6-ui-console0]idle-timeout 0 0
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>
<r6>
<r6>
<r6>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>sys
Enter system view, return user view with Ctrl+Z.
[r6]int
[r6]interface loo
[r6]interface LoopBack
^
Error:Incomplete command found at '^' position.
[r6]interface LoopBack 0
[r6-LoopBack0]ip ad
[r6-LoopBack0]ip address 6.6.6.6 32
[r6-LoopBack0]qu
[r6]ospf 1 rou
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]are
[r6-ospf-1]area 1
[r6-ospf-1-area-0.0.0.1]net
[r6-ospf-1-area-0.0.0.1]network 172.16.32.1 0.0.0.0
[r6-ospf-1-area-0.0.0.1]net
[r6-ospf-1-area-0.0.0.1]network 10.1.1.2 0.0.0.0
[r6-ospf-1-area-0.0.0.1]net
[r6-ospf-1-area-0.0.0.1]network 6.6.6.6 0.0.0.0
[r6-ospf-1-area-0.0.0.1]qu
[r6-ospf-1]qu
[r6]user
[r6]user-bind
[r6]user-group
[r6]user-interface con
[r6]user-interface console 0
[r6-ui-console0]id
[r6-ui-console0]idle-timeout 0 0
[r6-ui-console0]
<Huawei>
Nov 28 2022 20:59:39-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Nov 28 2022 21:00:23-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r7
[r7]ip ad
[r7]int
[r7]interface g0/0/0
[r7-GigabitEthernet0/0/0]ip ad
[r7-GigabitEthernet0/0/0]ip address 11.1.1.1 24
Nov 28 2022 21:01:07-08:00 r7 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r7-GigabitEthernet0/0/0]int g0/0/1
[r7-GigabitEthernet0/0/1]ip ad
[r7-GigabitEthernet0/0/1]ip address 10.1.1.1 24
Nov 28 2022 21:01:19-08:00 r7 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r7-GigabitEthernet0/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r7>sys
Enter system view, return user view with Ctrl+Z.
[r7]user
[r7]user-bind
[r7]user-group
[r7]user-interface con
[r7]user-interface console 0
[r7-ui-console0]id
[r7-ui-console0]idle-timeout 0 0
[r7-ui-console0]
[r7-ui-console0]
[r7-ui-console0]qu
[r7]int
[r7]interface lo
[r7]interface LoopBack 0
[r7-LoopBack0]ip ad
[r7-LoopBack0]qu
[r7-LoopBack0]quit
[r7]user
[r7]user-bind
[r7]user-group
[r7]user-interface con
[r7]user-interface console 0
[r7-ui-console0]id
[r7-ui-console0]idle-timeout 0
[r7-ui-console0]idle-timeout 0 0
[r7-ui-console0]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys r8
[r8]int g0/0/0
[r8-GigabitEthernet0/0/0]ip ad
[r8-GigabitEthernet0/0/0]ip address 172.16.96.2 19
Nov 28 2022 21:06:03-08:00 r8 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r8-GigabitEthernet0/0/0]qu
[r8]user
[r8]user-bind
[r8]user-group
[r8]user-interface con
[r8]user-interface console 0
[r8-ui-console0]id
[r8-ui-console0]idle-timeout 0 0
[r8-ui-console0]
[r8-ui-console0]
[r8-ui-console0]
Nov 28 2022 22:07:49-08:00 r8 %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEthern
et0/0/1 has turned into DOWN state.
[r8-ui-console0]
Nov 28 2022 22:08:09-08:00 r8 %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEthern
et0/0/1 has turned into UP state.
[r8-ui-console0]qu
[r8]int
[r8]interface g0/0/1.1
[r8-GigabitEthernet0/0/1.1]do
[r8-GigabitEthernet0/0/1.1]dot1q te
[r8-GigabitEthernet0/0/1.1]dot1q termination vid 4
[r8-GigabitEthernet0/0/1.1]ip
[r8-GigabitEthernet0/0/1.1]ip ad
[r8-GigabitEthernet0/0/1.1]ip address 192.168.1.1 24
Nov 28 2022 22:11:34-08:00 r8 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/1.1 has entered the UP state.
[r8-GigabitEthernet0/0/1.1]int
[r8-GigabitEthernet0/0/1.1]int g0/0/1.2
[r8-GigabitEthernet0/0/1.2]do
[r8-GigabitEthernet0/0/1.2]dot1q te
[r8-GigabitEthernet0/0/1.2]dot1q termination c
[r8-GigabitEthernet0/0/1.2]dot1q termination v
[r8-GigabitEthernet0/0/1.2]dot1q termination vid 5
[r8-GigabitEthernet0/0/1.2]ip
[r8-GigabitEthernet0/0/1.2]ip
[r8-GigabitEthernet0/0/1.2]ip ad
[r8-GigabitEthernet0/0/1.2]ip address 192.168.2.1 24
[r8-GigabitEthernet0/0/1.2]
Nov 28 2022 22:12:07-08:00 r8 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/1.2 has entered the UP state.
[r8-GigabitEthernet0/0/1.2]qu
[r8]dhcp en
[r8]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r8]ip pool 1
Info: It's successful to create an IP address pool.
[r8-ip-pool-1]net
[r8-ip-pool-1]netbios-type
[r8-ip-pool-1]network 192.168.1.0 ma
[r8-ip-pool-1]network 192.168.1.0 mask 24
[r8-ip-pool-1]ga
[r8-ip-pool-1]gateway-list 192.168.1.1
[r8-ip-pool-1]dns
[r8-ip-pool-1]dns-list 8.8.8.8
[r8-ip-pool-1]qu
[r8]ip pool 2
Info: It's successful to create an IP address pool.
[r8-ip-pool-2]net
[r8-ip-pool-2]netbios-type
[r8-ip-pool-2]network 192.168.2.0 ma
[r8-ip-pool-2]network 192.168.2.0 mask 24
[r8-ip-pool-2]ga
[r8-ip-pool-2]gateway-list 192.168.2.1
[r8-ip-pool-2]dns
[r8-ip-pool-2]dns-list 8.8.8.8
[r8-ip-pool-2]qu
[r8]int
[r8]interface g0/0/1.1
[r8-GigabitEthernet0/0/1.1]dh
[r8-GigabitEthernet0/0/1.1]dhcp s
[r8-GigabitEthernet0/0/1.1]dhcp select
[r8-GigabitEthernet0/0/1.1]dhcp s
[r8-GigabitEthernet0/0/1.1]dhcp select g
[r8-GigabitEthernet0/0/1.1]dhcp select global
[r8-GigabitEthernet0/0/1.1]int g0/0/1.2
[r8-GigabitEthernet0/0/1.2]dh
[r8-GigabitEthernet0/0/1.2]dhcp s
[r8-GigabitEthernet0/0/1.2]dhcp select g
[r8-GigabitEthernet0/0/1.2]dhcp select global
[r8-GigabitEthernet0/0/1.2]qu
[r8]user
[r8]user-bind
[r8]user-group
[r8]user-interface con
[r8]user-interface console 0
[r8-ui-console0]id
[r8-ui-console0]idle-timeout 0 0
[r8-ui-console0]qu
[r8]int
[r8]interface lo
[r8]interface LoopBack 0
[r8-LoopBack0]ip
[r8-LoopBack0]ip ad
[r8-LoopBack0]ip address 8.8.8.8 32
[r8-LoopBack0]qu
[r8]ospf
[r8-ospf-1]net
[r8-ospf-1]net
[r8-ospf-1]area
[r8-ospf-1]area 2
[r8-ospf-1-area-0.0.0.2]net
[r8-ospf-1-area-0.0.0.2]network 172.16.96.2 0.0.0.0
[r8-ospf-1-area-0.0.0.2]net
[r8-ospf-1-area-0.0.0.2]net
[r8-ospf-1-area-0.0.0.2]network 8.8.8.8 0.0.0.0
[r8-ospf-1-area-0.0.0.2]qu
[r8-ospf-1]qu
[r8]user
[r8]user-bind
[r8]user-group
[r8]user-interface con
[r8]user-interface console 0
[r8-ui-console0]id
[r8-ui-console0]idle-timeout 0 0
[r8-ui-console0]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw2
[sw2]
Nov 28 2022 22:05:45-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.vlan b
[sw2]vlan batch 2 3
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]
Nov 28 2022 22:05:55-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.int
[sw2]interface e0/0/2
[sw2-Ethernet0/0/2]po
[sw2-Ethernet0/0/2]port li
[sw2-Ethernet0/0/2]port link-ty
[sw2-Ethernet0/0/2]port link-ty
[sw2-Ethernet0/0/2]port link-type ac
[sw2-Ethernet0/0/2]port link-type access
[sw2-Ethernet0/0/2]po
[sw2-Ethernet0/0/2]port
Nov 28 2022 22:08:15-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is pinterface e0/0/2
[sw2-Ethernet0/0/2]interface e0/0/2
[sw2-Ethernet0/0/2]po
[sw2-Ethernet0/0/2]port tr
[sw2-Ethernet0/0/2]po
[sw2-Ethernet0/0/2]port de
[sw2-Ethernet0/0/2]port default v
[sw2-Ethernet0/0/2]port default vlan 2
[sw2-Ethernet0/0/2]int
[sw2-Ethernet0/0/2]int e0/0
Nov 28 2022 22:09:05-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095./3
[sw2-Ethernet0/0/3]po
[sw2-Ethernet0/0/3]port li
[sw2-Ethernet0/0/3]port link-ty
[sw2-Ethernet0/0/3]port link-type ac
[sw2-Ethernet0/0/3]port link-type access
[sw2-Ethernet0/0/3]po
[sw2-Ethernet0/0/3]port de
[sw2-Ethernet0/0/3]port default v
[sw2-Ethernet0/0/3]port default vlan 3
[sw2-Ethernet0/0/3]int
[sw2-Ethernet0/0/3]int
Nov 28 2022 22:09:25-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.e0/0/1
[sw2-Ethernet0/0/1]po
[sw2-Ethernet0/0/1]port li
[sw2-Ethernet0/0/1]port link-ty
[sw2-Ethernet0/0/1]port link-type tr
[sw2-Ethernet0/0/1]port link-type trunk
[sw2-Ethernet0/0/1]po
[sw2-Ethernet0/0/1]port te
[sw2-Ethernet0/0/1]port tr
Nov 28 2022 22:09:45-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 10, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-Ethernet0/0/1]port trunk all
[sw2-Ethernet0/0/1]port trunk allow-pass vla
[sw2-Ethernet0/0/1]port trunk allow-pass vlan 2 3
[sw2-Ethernet0/0/1]
Nov 28 2022 22:09:55-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 11, the
change loop count is 0, and the maximum number of records is 4095.
[sw2-Ethernet0/0/1]
[sw2-Ethernet0/0/1]
[sw2-Ethernet0/0/1]qu
[sw2]user
[sw2]user-
[sw2]user-group
[sw2]user-bind
[sw2]user-interface con
[sw2]user-interface console 0
[sw2-ui-console0]id
[sw2-ui-console0]idle-timeout 0 0
[sw2-ui-console0]
Nov 28 2022 22:10:55-08:00 sw2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 12, the
change loop count is 0, and the maximum number of records is 4095.
[sw5]
Nov 28 2022 22:14:20-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 4, the c
hange loop count is 0, and the maximum number of records is 4095.vlan
^
Error:Incomplete command found at '^' position.
[sw5]vlan ba
[sw5]vlan batch 4 5
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw5]int e0/0/2
[sw5-Ethernet0/0/2]po li
[sw5-Ethernet0/0/2]po li
Nov 28 2022 22:14:40-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 5, the c
hange loop count is 0, and the maximum number of records is 4095.
[sw5-Ethernet0/0/2]po
[sw5-Ethernet0/0/2]portli
[sw5-Ethernet0/0/2]port li
[sw5-Ethernet0/0/2]port link-ty
[sw5-Ethernet0/0/2]port link-type ac
[sw5-Ethernet0/0/2]port link-type access
[sw5-Ethernet0/0/2]po
[sw5-Ethernet0/0/2]port
Nov 28 2022 22:15:10-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 6, the c
hange loop count is 0, and the maximum number of records is 4095.
^
Error:Incomplete command found at '^' position.
[sw5-Ethernet0/0/2]port de
[sw5-Ethernet0/0/2]port default vl
[sw5-Ethernet0/0/2]port default vlan 4
[sw5-Ethernet0/0/2]in
Nov 28 2022 22:15:40-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 7, the c
hange loop count is 0, and the maximum number of records is 4095.t
^
Error: Unrecognized command found at '^' position.
[sw5-Ethernet0/0/2]int e0/0/3
[sw5-Ethernet0/0/3]po
[sw5-Ethernet0/0/3]port li
[sw5-Ethernet0/0/3]port link-ty
[sw5-Ethernet0/0/3]port link-type ac
[sw5-Ethernet0/0/3]port link-type access
[sw5-Ethernet0/0/3]p
[sw5-Ethernet0/0/3]port de
[sw5-Ethernet0/0/3]port default cv
[sw5-Ethernet0/0/3]port default v
[sw5-Ethernet0/0/3]port default vlan 5
[sw5-Ethernet0/0/3]
Nov 28 2022 22:16:00-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 9, the c
hange loop count is 0, and the maximum number of records is 4095.int
[sw5-Ethernet0/0/3]int e0/0/1
[sw5-Ethernet0/0/1]po
[sw5-Ethernet0/0/1]port li
[sw5-Ethernet0/0/1]port link-ty
[sw5-Ethernet0/0/1]port link-type tr
[sw5-Ethernet0/0/1]port link-type trunk
[sw5-Ethernet0/0/1]po
[sw5-Ethernet0/0/1]port tr
[sw5-Ethernet0/0/1]port trunk al
[sw5-Ethernet0/0/1]port trunk allow-pass v
[sw5-Ethernet0/0/1]port trunk allow-pass vlan 4 5
[sw5-Ethernet0/0/1]
Nov 28 2022 22:16:20-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 11, the
change loop count is 0, and the maximum number of records is 4095.
[sw5-Ethernet0/0/1]qu
[sw5]user
[sw5]user-
[sw5]user-group
[sw5]user-bind
[sw5]user-interface
[sw5]user
[sw5]user-
[sw5]user-group
[sw5]user-bind
[sw5]user-interface con
[sw5]user-interface console 0
[sw5-ui-console0]id
[sw5-ui-console0]idle-timeout 0 0
[sw5-ui-console0]
Nov 28 2022 22:17:20-08:00 sw5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
.191.3.1 configurations have been changed. The current change number is 12, the
change loop count is 0, and the maximum number of records is 4095.