Before continuing, the following dependencies must be met:
1.libusb-1.0
1.1:sudo apt-get install libusb-dev
1.2:sudo apt-get install libusb-1.0-0-dev
2.cmake
2.1:sudo add-apt-repository ppa:george-edison55/cmake-3.x
2.2:sudo apt-get update
2.3:sudo apt-get install cmake
STLINK should run on any system meeting the above constraints.
The STLINK software source code is retrieved using:
$>:3:git clone https://github.com/texane/stlink.git
Everything can be built from the top directory:
$> 4:cd stlink
$: 5:make
$> 6:cd build/Release && make install DESTDIR=_install
7:将st-flash复制到/usr/bin下就可使用sudo st-flash write test.bin 0x8000000下载程序了
It includes:
a communication library (libstlink.a),
a GDB server (st-util),
a flash manipulation tool (st-flash).
a programmer and chip information tool (st-info)