opencv对图像进行标定

简介

　　本篇是使用opencv函数：cvFindChessboardCorners、cvFindCornerSubPix、cvDrawChessboardCorners，来找到、优化并显示出来标定棋盘
图片的角点。
　　关于这三个函数得讲解看，可以参考：http://www.360doc.cn/article/10724725_367761079.html

角点检测

具体代码

　　具体代码如下：

#include <opencv2/opencv.hpp>

#include <stdio.h> using namespace cv; using namespace std; int boardWidth, boardHeight; int boardTotal; CvSize boardSize; CvPoint2D32f * image_points_buf; Mat srcColor, srcGray; IplImage srcIp; CvMat cvmatSrc; int nowNumber, found; char* picName; void initFindCorner(){ boardSize = cvSize(10, 7); boardWidth = boardSize.width; boardHeight = boardSize.height; boardTotal = boardWidth*boardHeight; image_points_buf = new CvPoint2D32f[boardTotal]; srcColor = imread(picName); imshow(“源图像”, srcColor); cvtColor(srcColor, srcGray, COLOR_BGR2GRAY); imshow(“灰阶图”, srcGray); srcIp = srcGray; cvmatSrc = srcColor; } void findCornersWork(){ found=cvFindChessboardCorners(&srcIp, boardSize, image_points_buf, \ &nowNumber, CV_CALIB_CB_ADAPTIVE_THRESH|CV_CALIB_CB_FILTER_QUADS); printf(“捕获角点数量:%d\n”, nowNumber); cvFindCornerSubPix(&srcIp, image_points_buf, nowNumber, cvSize(11,11), cvSize(-1,-1), cvTermCriteria(CV_TERMCRIT_EPS+CV_TERMCRIT_ITER,30,0.1)); cvDrawChessboardCorners(&cvmatSrc, boardSize, image_points_buf, nowNumber, found); imshow(“角点标识图”, srcColor); } int main(int argc, char* argv[]){ if(argc < 2){ cout << “Please input Picture name !!\n” << endl; return -1; } picName = argv[1]; initFindCorner(); findCornersWork(); waitKey(); return 0; }

代码讲解

　　1、初始化

void initFindCorner(){
    boardSize = cvSize(10, 7);
    boardWidth = boardSize.width;   
    boardHeight = boardSize.height;
    boardTotal = boardWidth*boardHeight;

    image_points_buf = new CvPoint2D32f[boardTotal];

    srcColor = imread(picName);
    imshow("源图像", srcColor);

    cvtColor(srcColor, srcGray, COLOR_BGR2GRAY);
    imshow("灰阶图", srcGray);
    srcIp = srcGray;
    cvmatSrc = srcColor;
}

首先设置预先设定图片的角点个数，本例使用的棋盘图片角点个数为：10X7，创建保存角点的结构:image_points_buf，接着导入棋盘图片，

并转为灰阶图像。

　　2、角点检测和显示

void findCornersWork(){
    found=cvFindChessboardCorners(&srcIp, boardSize, image_points_buf, \
                 &nowNumber, CV_CALIB_CB_ADAPTIVE_THRESH|CV_CALIB_CB_FILTER_QUADS);
    printf("捕获角点数量:%d\n", nowNumber);

    cvFindCornerSubPix(&srcIp, image_points_buf, nowNumber, cvSize(11,11), cvSize(-1,-1),
                                cvTermCriteria(CV_TERMCRIT_EPS+CV_TERMCRIT_ITER,30,0.1));
    cvDrawChessboardCorners(&cvmatSrc, boardSize, image_points_buf, nowNumber, found);
    imshow("角点标识图", srcColor);
}

    使用cvFindChessboardCorners进行角点检测，检测到的角点保存在image_points_buf，检测到的角点数量保存在nowNumber，如果nowNumber的值，和

实际图片上的角点数量相等，就表示角点检测成功。
　　接着cvFindCornerSubPix、cvDrawChessboardCorners将这些检测到的角点位置在图片：cvmatSrc上，显示输出。

结果显示

　　显示的结果如下：
        

畸变校正

　　前面已经讲解了如果找到棋盘标点图片的角点，这里在此基础上，继续进行后续的校正处理。
首先是找到多张图片的角点，接着将这些角点导入到函数cvCalibrateCamera2，进行camera内参数矩阵和畸变系数向量的生成。通过cvInitUndistortMap，
利用之前生成的内参数矩阵和畸变向量，计算出畸变映射到mapx和mapy中。最后cvRemap利用mapx、mapy对输入图像进行畸变校正。
　　可以参考文档：http://blog.csdn.net/guvcolie/article/details/7454632

具体代码

#include <opencv2/opencv.hpp>

#include <stdio.h> using namespace cv; using namespace std; int main(int argc, char* argv[]){ int cube_length=10; int cam_Dx = 100; //横轴方向长度 int cam_Dy = 100; //纵轴方向长度 int number_image = 7; int a=1; int number_image_copy= 7; CvSize board_size=cvSize(10,7); int board_width=board_size.width; int board_height=board_size.height; int total_per_image=board_width*board_height; CvPoint2D32f * image_points_buf = new CvPoint2D32f[total_per_image]; CvMat * image_points=cvCreateMat(number_image*total_per_image,2,CV_32FC1);//图像坐标系 CvMat * object_points=cvCreateMat(number_image*total_per_image,3,CV_32FC1);//世界坐标系 CvMat * point_counts=cvCreateMat(number_image,1,CV_32SC1); //角点存放位置 CvMat * intrinsic_matrix=cvCreateMat(3,3,CV_32FC1); //内参数矩阵 CvMat * distortion_coeffs=cvCreateMat(4,1,CV_32FC1); //畸变系数向量 char picName[7][10] = {"1.jpg", "2.jpg", "3.jpg", "4.jpg", "5.jpg", "6.jpg", "7.jpg"}; IplImage * show; int count; int found; int step; int successes=0; while(a<=number_image_copy){ show=cvLoadImage(picName[a-1],-1); found=cvFindChessboardCorners(show,board_size,image_points_buf,&count, CV_CALIB_CB_ADAPTIVE_THRESH|CV_CALIB_CB_FILTER_QUADS); if(found==0){ cout<<"第"<<a<<"帧图片无法找到棋盘格所有角点!\n\n"; cvNamedWindow("RePlay",1); cvShowImage("RePlay",show); cvWaitKey(0); }else{ cout<<"第"<<a<<"帧图像成功获得"<<count<<"个角点...\n"; IplImage * gray_image= cvCreateImage(cvGetSize(show),8,1); cvCvtColor(show,gray_image,CV_BGR2GRAY); cout<<"获取源图像灰度图过程完成...\n"; cvFindCornerSubPix(gray_image,image_points_buf,count,cvSize(11,11),cvSize(-1,-1), cvTermCriteria(CV_TERMCRIT_EPS+CV_TERMCRIT_ITER,30,0.1)); cout<<"灰度图亚像素化过程完成...\n"; cvDrawChessboardCorners(show,board_size,image_points_buf,count,found); cout<<"在源图像上绘制角点过程完成...\n\n"; } if(total_per_image==count){ step=successes*total_per_image; for(int i=step,j=0;j<total_per_image;++i,++j){ CV_MAT_ELEM(*image_points,float,i,0)=image_points_buf[j].x; CV_MAT_ELEM(*image_points,float,i,1)=image_points_buf[j].y;// 求完每个角点横纵坐标值都存在image_point_buf里 CV_MAT_ELEM(*object_points,float,i,0)=(float)((j/cube_length) * cam_Dx); CV_MAT_ELEM(*object_points,float,i,1)=(float)((j%cube_length) * cam_Dy); CV_MAT_ELEM(*object_points,float,i,2)=0.0f; } CV_MAT_ELEM(*point_counts,int,successes,0)=total_per_image; successes++; } a++; } cout<<"*********************************************\n"; cout<<number_image<<"帧图片中，标定成功的图片为"<<successes<<"帧...\n"; cout<<number_image<<"帧图片中，标定失败的图片为"<<number_image-successes<<"帧...\n\n"; cout<<"*********************************************\n\n"; IplImage * show_colie; show_colie = show; CvMat * object_points2=cvCreateMat(successes*total_per_image,3,CV_32FC1); CvMat * image_points2=cvCreateMat(successes*total_per_image,2,CV_32FC1); CvMat * point_counts2=cvCreateMat(successes,1,CV_32SC1); for(int i=0;i<successes*total_per_image;++i){ CV_MAT_ELEM(*image_points2,float,i,0)=CV_MAT_ELEM(*image_points,float,i,0);//用来存储角点提取成功的图像的角点 CV_MAT_ELEM(*image_points2,float,i,1)=CV_MAT_ELEM(*image_points,float,i,1); CV_MAT_ELEM(*object_points2,float,i,0)=CV_MAT_ELEM(*object_points,float,i,0); CV_MAT_ELEM(*object_points2,float,i,1)=CV_MAT_ELEM(*object_points,float,i,1); CV_MAT_ELEM(*object_points2,float,i,2)=CV_MAT_ELEM(*object_points,float,i,2); } for(int i=0;i<successes;++i){ CV_MAT_ELEM(*point_counts2,int,i,0)=CV_MAT_ELEM(*point_counts,int,i,0); } cvReleaseMat(&object_points); cvReleaseMat(&image_points); cvReleaseMat(&point_counts); CV_MAT_ELEM(*intrinsic_matrix,float,0,0)=1.0f; CV_MAT_ELEM(*intrinsic_matrix,float,1,1)=1.0f; cvCalibrateCamera2(object_points2,image_points2,point_counts2,cvGetSize(show_colie), intrinsic_matrix,distortion_coeffs,NULL,NULL,0); cvSave("Intrinsics.xml",intrinsic_matrix); cvSave("Distortion.xml",distortion_coeffs); cout<<"摄像机矩阵、畸变系数向量已经分别存储在名为Intrinsics.xml、Distortion.xml文档中\n\n"; CvMat * intrinsic=(CvMat *)cvLoad("Intrinsics.xml"); CvMat * distortion=(CvMat *)cvLoad("Distortion.xml"); IplImage * mapx=cvCreateImage(cvGetSize(show_colie),IPL_DEPTH_32F,1); IplImage * mapy=cvCreateImage(cvGetSize(show_colie),IPL_DEPTH_32F,1); cvInitUndistortMap(intrinsic,distortion,mapx,mapy); cvNamedWindow("原始图像",1); cvNamedWindow("非畸变图像",1); show_colie = cvLoadImage(argv[1],-1); IplImage * clone=cvCloneImage(show_colie); cvShowImage("原始图像",show_colie); cvRemap(clone,show_colie,mapx,mapy); cvReleaseImage(&clone); cvShowImage("非畸变图像",show_colie); cvWaitKey(0); return 0; }

代码讲解

　　1、首先这里是使用了了7张棋盘图片用来标定，所以cvFindChessboardCorners函数，会依次寻找7次角点。如果找到角点成功，则将对应结果保存到
image_points、object_points中，注意保存到object_points的时候需要做计算：(float)((j/cube_length) * cam_Dx);

while(a<=number_image_copy){
    show=cvLoadImage(picName[a-1],-1);

    found=cvFindChessboardCorners(show,board_size,image_points_buf,&count,
            CV_CALIB_CB_ADAPTIVE_THRESH|CV_CALIB_CB_FILTER_QUADS);
    if(found==0){      
        cout<<"第"<<a<<"帧图片无法找到棋盘格所有角点!\n\n";
        cvNamedWindow("RePlay",1);
        cvShowImage("RePlay",show);
        cvWaitKey(0);

    }else{
        cout<<"第"<<a<<"帧图像成功获得"<<count<<"个角点...\n";

        IplImage * gray_image= cvCreateImage(cvGetSize(show),8,1);

        cvCvtColor(show,gray_image,CV_BGR2GRAY);

        cout<<"获取源图像灰度图过程完成...\n";
        cvFindCornerSubPix(gray_image,image_points_buf,count,cvSize(11,11),cvSize(-1,-1),
            cvTermCriteria(CV_TERMCRIT_EPS+CV_TERMCRIT_ITER,30,0.1));
        cout<<"灰度图亚像素化过程完成...\n";
        cvDrawChessboardCorners(show,board_size,image_points_buf,count,found);
        cout<<"在源图像上绘制角点过程完成...\n\n";
    }

    if(total_per_image==count){
        step=successes*total_per_image;
        for(int i=step,j=0;j<total_per_image;++i,++j){
            CV_MAT_ELEM(*image_points,float,i,0)=image_points_buf[j].x; 

            CV_MAT_ELEM(*image_points,float,i,1)=image_points_buf[j].y;// 求完每个角点横纵坐标值都存在image_point_buf里
            CV_MAT_ELEM(*object_points,float,i,0)=(float)((j/cube_length) * cam_Dx);
            CV_MAT_ELEM(*object_points,float,i,1)=(float)((j%cube_length) * cam_Dy);
            CV_MAT_ELEM(*object_points,float,i,2)=0.0f;
        }
        CV_MAT_ELEM(*point_counts,int,successes,0)=total_per_image;
        successes++;
    }
    a++;
}

    其中successes用来保存，需找角点成功的次数，如果7次都成功，则successes为7。

　　2、将找到的角点信息，重新存储到image_points2和object_points2中，利用cvCalibrateCamera2来计算矩阵、向量系数到intrinsic_matrix、distortion_coeffs，本保存到本地文件。

IplImage * show_colie;
show_colie = show;


CvMat * object_points2=cvCreateMat(successes*total_per_image,3,CV_32FC1);

CvMat * image_points2=cvCreateMat(successes*total_per_image,2,CV_32FC1);
CvMat * point_counts2=cvCreateMat(successes,1,CV_32SC1);
for(int i=0;i<successes*total_per_image;++i){
    CV_MAT_ELEM(*image_points2,float,i,0)=CV_MAT_ELEM(*image_points,float,i,0);//用来存储角点提取成功的图像的角点
    CV_MAT_ELEM(*image_points2,float,i,1)=CV_MAT_ELEM(*image_points,float,i,1);
    CV_MAT_ELEM(*object_points2,float,i,0)=CV_MAT_ELEM(*object_points,float,i,0);
    CV_MAT_ELEM(*object_points2,float,i,1)=CV_MAT_ELEM(*object_points,float,i,1);
    CV_MAT_ELEM(*object_points2,float,i,2)=CV_MAT_ELEM(*object_points,float,i,2);
}

for(int i=0;i<successes;++i){
    CV_MAT_ELEM(*point_counts2,int,i,0)=CV_MAT_ELEM(*point_counts,int,i,0);
}


cvReleaseMat(&object_points);
cvReleaseMat(&image_points);
cvReleaseMat(&point_counts);

CV_MAT_ELEM(*intrinsic_matrix,float,0,0)=1.0f;
CV_MAT_ELEM(*intrinsic_matrix,float,1,1)=1.0f;

cvCalibrateCamera2(object_points2,image_points2,point_counts2,cvGetSize(show_colie),
        intrinsic_matrix,distortion_coeffs,NULL,NULL,0);

cvSave("Intrinsics.xml",intrinsic_matrix);
cvSave("Distortion.xml",distortion_coeffs);

  3、函数cvInitUndistortMap和cvRemap，通过之前计算的矩阵、向量系数，对需要校正的图像：show_colie进行处理，并分别显示出来。

IplImage * mapx=cvCreateImage(cvGetSize(show_colie),IPL_DEPTH_32F,1);
IplImage * mapy=cvCreateImage(cvGetSize(show_colie),IPL_DEPTH_32F,1);

cvInitUndistortMap(intrinsic,distortion,mapx,mapy);

cvNamedWindow("原始图像",1);
cvNamedWindow("非畸变图像",1);

show_colie = cvLoadImage(argv[1],-1);
IplImage * clone=cvCloneImage(show_colie);
cvShowImage("原始图像",show_colie);
cvRemap(clone,show_colie,mapx,mapy);
cvReleaseImage(&clone);
cvShowImage("非畸变图像",show_colie);

video畸变校正

　　在之前的基础上，修改被校正的输入即可，简单的话，在前一个例子中，将如下代码：

    IplImage * mapx=cvCreateImage(cvGetSize(show_colie),IPL_DEPTH_32F,1);
    IplImage * mapy=cvCreateImage(cvGetSize(show_colie),IPL_DEPTH_32F,1);

    cvInitUndistortMap(intrinsic,distortion,mapx,mapy);

    cvNamedWindow("原始图像",1);
    cvNamedWindow("非畸变图像",1);

    show_colie = cvLoadImage(argv[1],-1);
    IplImage * clone=cvCloneImage(show_colie);
    cvShowImage("原始图像",show_colie);
    cvRemap(clone,show_colie,mapx,mapy);
    cvReleaseImage(&clone);
    cvShowImage("非畸变图像",show_colie);
</source lang>

 　　替换为：
<source lang="cpp" line>
    VideoCapture capture(argv[1]);
    if (!capture.isOpened()){
        return 0;
    }
    while(1){
        if (!capture.read(frame)){
            break;
        }
        ipFrame = frame;
        IplImage * clone=cvCloneImage(&ipFrame);
        cvShowImage("原始图像", &ipFrame);
        cvRemap(clone,show_colie,mapx,mapy);
        cvReleaseImage(&clone);
        cvShowImage("非畸变图像", show_colie);

        if (waitKey(5) == 'q'){
            break;
        }
    }

   就是将被校正的图像修改为，从video中获取，循环校正显示。

效果演示

　　对应的图片畸变校正效果如下：

     
　                  原图像                                      校正后图像

代码下载：http://download.csdn.net/detail/u011630458/9268829

        </div>