系列函数
系列函数的定义在arch/arm/mach-s3c2410/gpio.c,相关的宏定义在include/asm-arm/arch-s3c2410/regs-gpio.h
(1)void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); 默默的努力
设置相应GPIO口的输出值,例如:
pin=S3C2410_GPG2,to=0,则设置S3C2410_GPG2的输出值为0;
pin=S3C2410_GPG2,to=1,则设置S3C2410_GPG2的输出值为1。
函数定义:
- void
s3c2410_gpio_setpin(unsigned int pin, unsigned int to) - {
-
void __iomem *base = S3C2410_GPIO_BASE(pin); -
unsigned long offs = S3C2410_GPIO_OFFSET(pin); -
unsigned long flags; -
unsigned long dat; -
-
local_irq_save(flags); -
-
dat = __raw_readl(base + 0x04); -
dat &= ~(1 << offs); -
dat |= to << offs; -
__raw_writel(dat, base + 0x04); -
-
local_irq_restore(flags); - }
- EXPORT_SYMBOL(s3c2410_gpio_setpin);
(2)unsigned int s3c2410_gpio_getpin(unsigned int pin); 默默的努力
获取相应GPIO口的值。
函数定义:
- unsigned
int s3c2410_gpio_getpin(unsigned int pin) - {
-
void __iomem *base = S3C2410_GPIO_BASE(pin); -
unsigned long offs = S3C2410_GPIO_OFFSET(pin); -
-
return __raw_readl(base + 0x04) & (1<< offs); - }
-
- EXPORT_SYMBOL(s3c2410_gpio_getpin);
(3)void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); 默默的努力
设置相应GPIO口的工作模式,输入、输出、中断等。
函数定义:
- void
s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) - {
-
void __iomem *base = S3C2410_GPIO_BASE(pin); -
unsigned long mask; -
unsigned long con; -
unsigned long flags; -
-
if (pin < S3C2410_GPIO_BANKB) { -
mask = 1 << S3C2410_GPIO_OFFSET(pin); -
} else { -
mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; -
} -
-
local_irq_save(flags); -
-
con = __raw_readl(base + 0x00); -
con &= ~mask; -
con |= function; -
-
__raw_writel(con, base + 0x00); -
-
local_irq_restore(flags); - }
-
- EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
(4)unsigned int s3c2410_gpio_getcfg(unsigned int pin);
获取相应GPIO口的工作模式,输入、输出、中断等。
函数定义:
- unsigned
int s3c2410_gpio_getcfg(unsigned int pin) - {
-
void __iomem *base = S3C2410_GPIO_BASE(pin); -
unsigned long mask; -
-
if (pin < S3C2410_GPIO_BANKB) { -
mask = 1 << S3C2410_GPIO_OFFSET(pin); -
} else { -
mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; -
} -
-
return __raw_readl(base) & mask; - }
-
- EXPORT_SYMBOL(s3c2410_gpio_getcfg);
(5)void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
设置相应的GPIO口的电平,例如:
pin=S3C2410_GPG2,to=0,则拉低S3C2410_GPG2,也就是设置S3C2410_GPG2的值为0;
pin=S3C2410_GPG2,to=1,则拉高S3C2410_GPG2,也就是设置S3C2410_GPG2的值为1。
函数定义:
- void
s3c2410_gpio_pullup(unsigned int pin, unsigned int to) - {
-
void __iomem *base = S3C2410_GPIO_BASE(pin); -
unsigned long offs = S3C2410_GPIO_OFFSET(pin); -
unsigned long flags; -
unsigned long up; -
-
if (pin < S3C2410_GPIO_BANKB) -
return; -
-
local_irq_save(flags); -
-
up = __raw_readl(base + 0x08); -
up &= ~(1L << offs); -
up |= to << offs; -
__raw_writel(up, base + 0x08); -
-
local_irq_restore(flags); - }
-
- EXPORT_SYMBOL(s3c2410_gpio_pullup);
(6)unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change);
杂项设置,设置寄存器MISCCR,具体看函数定义。
函数定义:
- unsigned
int s3c2410_modify_misccr(unsigned int clear, unsigned int change) - {
-
unsigned long flags; -
unsigned long misccr; -
-
local_irq_save(flags); -
misccr = __raw_readl(S3C2410_MISCCR); -
misccr &= ~clear; -
misccr ^= change; -
__raw_writel(misccr, S3C2410_MISCCR); -
local_irq_restore(flags); -
-
return misccr; - }
-
- EXPORT_SYMBOL(s3c2410_modify_misccr);
(7)int s3c2410_gpio_getirq(unsigned int pin);
获取相应的GPIO口所对应的中断号。
函数定义:
- int
s3c2410_gpio_getirq(unsigned int pin) - {
-
if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15_EINT23) -
return -1; -
-
if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) -
return -1; -
-
if (pin < S3C2410_GPF4) -
return (pin - S3C2410_GPF0) + IRQ_EINT0; -
-
if (pin < S3C2410_GPG0) -
return (pin - S3C2410_GPF4) + IRQ_EINT4; -
-
return (pin - S3C2410_GPG0) + IRQ_EINT8; - }
-
- EXPORT_SYMBOL(s3c2410_gpio_getirq);
(8)int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, unsigned int config);
中断过滤配置,具体看函数定义。
函数定义:
- int
s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, -
unsigned int config) - {
-
void __iomem *reg = S3C2410_EINFLT0; -
unsigned long flags; -
unsigned long val; -
-
if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15) -
return -1; -
-
config &= 0xff; -
-
pin -= S3C2410_GPG8_EINT16; -
reg += pin & ~3; -
-
local_irq_save(flags); -
-
-
-
val = __raw_readl(reg); -
val &= ~(0xff << ((pin & 3) * 8)); -
val |= config << ((pin & 3) * 8); -
__raw_writel(val, reg); -
-
-
-
val = __raw_readl(S3C2410_EXTINT2); -
val &= ~(1 << ((pin * 4) + 3)); -
val |= on << ((pin * 4) + 3); -
__raw_writel(val, S3C2410_EXTINT2); -
-
local_irq_restore(flags); -
-
return 0; - }
-
- EXPORT_SYMBOL(s3c2410_gpio_irqfilter);