记录nrf 52 串口的几个细节

rx脚要外接上拉或改
nrf_gpio_cfg_input(p_config->pselrxd, NRF_GPIO_PIN_NOPULL);
为
nrf_gpio_cfg_input(p_config->pselrxd, NRF_GPIO_PIN_PULLUP);

static void apply_config(nrfx_uarte_t        const * p_instance,
                         nrfx_uarte_config_t const * p_config)
{
    if (p_config->pseltxd != NRF_UARTE_PSEL_DISCONNECTED)
    {
        nrf_gpio_pin_set(p_config->pseltxd);
        nrf_gpio_cfg_output(p_config->pseltxd);
    }
    if (p_config->pselrxd != NRF_UARTE_PSEL_DISCONNECTED)
    {
        //nrf_gpio_cfg_input(p_config->pselrxd, NRF_GPIO_PIN_NOPULL);改为以下一行
         nrf_gpio_cfg_input(p_config->pselrxd, NRF_GPIO_PIN_PULLUP);
    }
.......
}

串口初始化，FIFO的大小必须是2的幂，否则初始化出错。
看注释：must be a power of 2 or ZERO (No FIFO).

/**@brief Macro for safe initialization of the UART module in a single user instance when using
 *        a FIFO together with UART.
 *
 * @param[in]   P_COMM_PARAMS   Pointer to a UART communication structure: app_uart_comm_params_t
 * @param[in]   RX_BUF_SIZE     Size of desired RX buffer, must be a power of 2 or ZERO (No FIFO).
 * @param[in]   TX_BUF_SIZE     Size of desired TX buffer, must be a power of 2 or ZERO (No FIFO).
 * @param[in]   EVT_HANDLER   Event handler function to be called when an event occurs in the
 *                              UART module.
 * @param[in]   IRQ_PRIO        IRQ priority, app_irq_priority_t, for the UART module irq handler.
 * @param[out]  ERR_CODE        The return value of the UART initialization function will be
 *                              written to this parameter.
 *
 * @note Since this macro allocates a buffer and registers the module as a GPIOTE user when flow
 *       control is enabled, it must only be called once.
 */
#define APP_UART_FIFO_INIT(P_COMM_PARAMS, RX_BUF_SIZE, TX_BUF_SIZE, EVT_HANDLER, IRQ_PRIO, ERR_CODE) \
    do                                                                                             \
    {                                                                                              \
        app_uart_buffers_t buffers;                                                                \
        static uint8_t     rx_buf[RX_BUF_SIZE];                                                    \
        static uint8_t     tx_buf[TX_BUF_SIZE];                                                    \
                                                                                                   \
        buffers.rx_buf      = rx_buf;                                                              \
        buffers.rx_buf_size = sizeof (rx_buf);                                                     \
        buffers.tx_buf      = tx_buf;                                                              \
        buffers.tx_buf_size = sizeof (tx_buf);                                                     \
        ERR_CODE = app_uart_init(P_COMM_PARAMS, &buffers, EVT_HANDLER, IRQ_PRIO);                  \
    } while (0)