STM32 HAL库 0.91寸oled SSD1306驱动包括画点画线函数

赤霞浪客

于 2024-03-27 11:55:14 发布

阅读量587

点赞数 6

文章标签： stm32 嵌入式硬件单片机

本文链接：https://blog.csdn.net/qq_32590891/article/details/137072945

版权

最近做嘉立创的示波器活动，但是官方例程是1.8寸tft屏幕的，我提取了部分函数并且适配了原有的0.91寸oled屏幕上。

SSD1306驱动，理论上同一驱动芯片只需修改oled的初始化函数为适配的寄存器即可。

包括画点函数，画线函数，以及bmp位图的画图函数，支持反色显示，showstring函数可以更改字符距离，showchar只有8和16两个大小。

HAL库Cubemx生成时记得把iic.h单独列出

oled.c

#include "oled.h"
#include "stdlib.h"
#include "font.h"  	 
//若#define S_I2C 则使用软件iic
//OLED 的显存
//[0]0 1 2 3 ... 127	
//[1]0 1 2 3 ... 127	
//[2]0 1 2 3 ... 127	
//[3]0 1 2 3 ... 127	
//[4]0 1 2 3 ... 127	
//[5]0 1 2 3 ... 127	
//[6]0 1 2 3 ... 127	
//[7]0 1 2 3 ... 127 	

/**********************************************
//Software IIC Start
**********************************************/
void IIC_Start(void)
{
	OLED_SCLK_Set();
	OLED_SDIN_Set();
	OLED_SDIN_Clr();
	OLED_SCLK_Clr();
}
/**********************************************
//Software IIC Stop
**********************************************/
void IIC_Stop(void)
{
	OLED_SCLK_Set();
	OLED_SDIN_Clr();
	OLED_SDIN_Set();
}
/**********************************************
//Software IIC Ack
**********************************************/
void IIC_Wait_Ack(void)
{
	OLED_SCLK_Set() ;
	OLED_SCLK_Clr();
}
/**********************************************
// IIC Write byte
**********************************************/
void Write_IIC_Byte(unsigned char IIC_Byte)
{
	unsigned char i;
	unsigned char m,da;
	da=IIC_Byte;
	OLED_SCLK_Clr();
	for(i=0;i<8;i++)		
	{
		m=da;
		m=m&0x80;
		if(m==0x80)
		{
			OLED_SDIN_Set();
		}
		else 
		OLED_SDIN_Clr();
		da=da<<1;
		OLED_SCLK_Set();
		OLED_SCLK_Clr();
	}
}
/**********************************************
// IIC Write Command
**********************************************/
void Write_IIC_Command(unsigned char IIC_Command)
{
	#if S_I2C
	IIC_Start();
	Write_IIC_Byte(0x78);            //Slave address,SA0=0
	IIC_Wait_Ack();	
	Write_IIC_Byte(0x00);			//write command
	IIC_Wait_Ack();	
	Write_IIC_Byte(IIC_Command); 
	IIC_Wait_Ack();	
	IIC_Stop();
	#else
	HAL_I2C_Mem_Write(&hi2c1,0x78,0x00,I2C_MEMADD_SIZE_8BIT,&IIC_Command,1,100);
	#endif
}
/**********************************************
// IIC Write Data
**********************************************/
void Write_IIC_Data(unsigned char IIC_Data)
{
	#if S_I2C
	IIC_Start();
	Write_IIC_Byte(0x78);			//Slave address,SA0=0
	IIC_Wait_Ack();	
	Write_IIC_Byte(0x40);			//write data
	IIC_Wait_Ack();	
	Write_IIC_Byte(IIC_Data);
	IIC_Wait_Ack();	
	IIC_Stop();
	#else
	HAL_I2C_Mem_Write(&hi2c1,0x78,0x40,I2C_MEMADD_SIZE_8BIT,&IIC_Data,1,100);
	#endif
}
/**********************************************
//写入函数
**********************************************/	 
void OLED_WR_Byte(unsigned dat,unsigned cmd)
{
	if(cmd)
	{
		Write_IIC_Data(dat);
	}
	else 
	{
		Write_IIC_Command(dat);	
	}
}
/**********************************************
//取反写入函数
**********************************************/	 
void OLED_WR_Byte_Inverse(unsigned dat,unsigned cmd)
{
	dat=~dat;
	if(cmd)
	{
		Write_IIC_Data(dat);
	}
	else 
	{
		Write_IIC_Command(dat);	
	}
}

/********************************************
//Fill Picture
********************************************/
void fill_picture(unsigned char fill_Data)
{
	unsigned char m,n;
	for(m=0;m<8;m++)
	{
		OLED_WR_Byte(0xb0+m,0);		//page0-page1
		OLED_WR_Byte(0x00,0);		//low column start address
		OLED_WR_Byte(0x10,0);		//high column start address
		for(n=0;n<128;n++)
		{
			OLED_WR_Byte(fill_Data,1);
		}
	}
}
/**********************************************
//Set Position
//坐标设置
**********************************************/
void OLED_Set_Pos(unsigned char x, unsigned char y) 
{ 	
	OLED_WR_Byte(0xb0+y,OLED_CMD);
	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
	OLED_WR_Byte((x&0x0f),OLED_CMD); 
}   	  
void OLED_Set_Pos2(unsigned char x, unsigned char y) 
{ 	
	OLED_WR_Byte(((y&0xb0)>>4)|0x10,OLED_CMD);

	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
	OLED_WR_Byte((x&0x0f),OLED_CMD); 
}
/**********************************************
//Turn on OLED display  
//开启OLED显示    
**********************************************/
void OLED_Display_On(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ON
	OLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}   
/**********************************************
//Turn off OLED display
//关闭OLED显示    
**********************************************/
void OLED_Display_Off(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFF
	OLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}	
/**********************************************
//清屏函数,清完屏,整个屏幕是黑色的!  
**********************************************/	   			 
void OLED_Clear(void)  
{  
	u8 i,n;		    
	for(i=0;i<8;i++)  
	{  
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
		for(n=0;n<128;n++){OLED_WR_Byte(0,OLED_DATA);} 
	} //更新显示
}
/**********************************************
//部分清屏  
**********************************************/	 
void OLED_Clear_sw(uint8_t x1,uint8_t x2,uint8_t y1,uint8_t y2)  
{  
	u8 i,n;		    
	for(i=y1;i<y2;i++)  
	{  
		for(n=x1;n<x2;n++)
		{
			OLED_Set_Pos(n,i);
			OLED_WR_Byte(0,OLED_DATA); 
			}
	} //更新显示
}
/**********************************************
//亮屏函数，整个屏幕点亮!  
**********************************************/	 
void OLED_On(void)  
{  
	u8 i,n;		    
	for(i=0;i<8;i++)  
	{  
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址   
		for(n=0;n<128;n++)OLED_WR_Byte(1,OLED_DATA); 
	} //更新显示
}
/**********************************************
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//chr：要显示的字符		 
//size:选择字体 16/12  
**********************************************/	  
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size)
{      	
	unsigned char c=0,i=0;	
	c=chr-' ';//得到偏移后的值，为什么做偏移可查看 ASCII 表		
	if(x>Max_Column-1){x=0;y=y+2;}
	if(Char_Size ==16)
		{
			OLED_Set_Pos(x,y);	
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
			OLED_Set_Pos(x,y+1);
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
		}
		else 
		{	
			OLED_Set_Pos(x,y);
			for(i=0;i<6;i++)
			OLED_WR_Byte(F6x8[c][i],OLED_DATA);	
		}
}
/**********************************************
//在指定位置显示一个字符,包括部分字符，添加了反白显示
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示
//chr：要显示的字符		 
//size:选择字体 16/12  
**********************************************/	  
void OLED_ShowChar_Complete(u8 x,u8 y,u8 chr,u8 Char_Size,uint8_t mode)
{      	
	unsigned char c=0,i=0;	
	c=chr-' ';//得到偏移后的值，为什么做偏移可查看 ASCII 表		
	if(x>Max_Column-1){x=0;y=y+2;}
		if(mode==0){
	if(Char_Size ==16)
		{
			OLED_Set_Pos(x,y);	
			for(i=0;i<8;i++)
			OLED_WR_Byte_Inverse(F8X16[c*16+i],OLED_DATA);
			OLED_Set_Pos(x,y+1);
			for(i=0;i<8;i++)
			OLED_WR_Byte_Inverse(F8X16[c*16+i+8],OLED_DATA);
		}
		else 
		{	
			OLED_Set_Pos(x,y);
			for(i=0;i<6;i++)
			OLED_WR_Byte_Inverse(F6x8[c][i],OLED_DATA);	
		}
	}
	if(mode){
	if(Char_Size ==16)
		{
			OLED_Set_Pos(x,y);	
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
			OLED_Set_Pos(x,y+1);
			for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
		}
		else 
		{	
			OLED_Set_Pos(x,y);
			for(i=0;i<6;i++)
			OLED_WR_Byte(F6x8[c][i],OLED_DATA);	
		}
	}
}
/**********************************************
//m^n函数
**********************************************/	  
u32 oled_pow(u8 m,u8 n)
{
	u32 result=1;	 
	while(n--)result*=m;    
	return result;
}	
/**********************************************
//显示2个数字
//x:0~127
//y:0~63 
//num:数值(0~4294967295);
//len :数字的位数
//size:字体大小
**********************************************/	  			  	 		  
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size2)
{         	
	u8 t,temp;
	u8 enshow=0;						   
	for(t=0;t<len;t++)
	{
		temp=(num/oled_pow(10,len-t-1))%10;
		if(enshow==0&&t<(len-1))
		{
			if(temp==0)
			{
				OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
				continue;
			}
			else 
				enshow=1; 	 
		}
	 	OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2); 
	}
} 

//显示负数、浮点数字
//x,y :起点坐标
//num :要显示的数字
//len :数字的位数，包括小数点 len=4时显示x.xx
//size:字体大小
//mode:0,反色显示;1,正常显示
//@n，小数点后位数，默认为2
 
void OLED_ShowFNum(u8 x,u8 y,float num,u8 len,u8 size,u8 mode)
{         	
	u8 t,temp,i=0,m=0,n=2;
	u8 enshow=0,pointshow=0;
	uint16_t k;
	len--;
	if(size==8)m=2;
	if(num<0)
	{
	num=-num;
	i=1;     //负数标志	
	}	
	k=num*oled_pow(10,n); //此处为显示一位小数*10转化为整数
	for(t=0;t<len;t++)
	{
		temp=(k/oled_pow(10,len-t-1 ))%10;
		if(enshow==0&&t<(len-2))
		{
			if(temp==0)
			{
				if(((k/oled_pow(10,len-t-2)%10)!=0)&&(i==1))//判断是否为负数且在最高位前一位
				{
					OLED_ShowChar_Complete(x+(size/2+m)*t,y,'-',size,mode);
									
 
					i=0;	                              //清除判断后一位的标志
				}else
		    		OLED_ShowChar_Complete(x+(size/2+m)*t,y,'0',size,mode);//如果没到数字就显示0
									
 
				continue;
			}else enshow=1;		//此处是判断是否要显示数字	
		}
		if(t==len-n)//判断是否为最后一位的前一位（显示一位小数）
		{
			OLED_ShowChar_Complete(x+(size/2+m)*t,y,'.',size,mode);
       		OLED_ShowChar_Complete(x+(size/2+m)*(t+1),y,temp+'0',size,mode);
			pointshow=1;
			continue;
		}
		if(pointshow==1){	
			OLED_ShowChar_Complete(x+(size/2+m)*(t+1),y,temp+'0',size,mode);
			
		}else	
	 		OLED_ShowChar_Complete(x+(size/2+m)*t,y,temp+'0',size,mode);
		//一位一位显示下去
	 }
}
/**********************************************
//显示一个字符号串
//Char——Size影响的是两字符间间距
**********************************************/
void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 Char_Size,uint8_t mode)
{
	unsigned char j=0;
	while (chr[j]!='\0')
	{		
		OLED_ShowChar_Complete(x,y,chr[j],Char_Size,mode);
		x+=Char_Size/2;
		if(x>120){x=0;y+=2;}
		j++;
	}
}
/**********************************************
//显示汉字
**********************************************/
void OLED_ShowCHinese(u8 x,u8 y,u8 no)
{      			    
	u8 t,adder=0;
	OLED_Set_Pos(x,y);	
    for(t=0;t<16;t++)
	{
		OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);
		adder+=1;
     }	
	OLED_Set_Pos(x,y+1);	
    for(t=0;t<16;t++)
	{	
		OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);
		adder+=1;
	}					
}
/**********************************************
功能描述：显示BMP图片
//x0，y0视屏幕而定
**********************************************/
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{ 	
 unsigned int j=0;
 unsigned char x,y;
  
  if(y1%8==0) y=y1/8;      
  else y=y1/8+1;
	for(y=y0;y<y1;y++)
	{
		OLED_Set_Pos(x0,y);
    	for(x=x0;x<x1;x++)
		{      
	    	OLED_WR_Byte(BMP[j++],OLED_DATA);	    	
		}
	}
} 



/*
画线函数
*/
void TFT_DrawLine(uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2)
{
//		for(int i=0;i<5;i++)  
//	{
//		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
//		OLED_WR_Byte ((((x1+8)&0xf0)>>4)|0x10,OLED_CMD);      //设置显示位置—列低地址
//		OLED_WR_Byte (((x1+8)&0x0f),OLED_CMD);      //设置显示位置—列高地址   
//		OLED_WR_Byte(0,OLED_DATA); 
//	} //更新显示，清除前8列
	
    uint16_t i=0;
	uint16_t t=0; 
	int xerr=0,yerr=0,delta_x=0,delta_y=0,distance=0;
	int incx=0,incy=0,uRow=0,uCol=0;
	delta_x=x2-x1; 
	delta_y=y2-y1;
	uRow=x1;
	uCol=y1;
	if(delta_x>0){
        incx=1; //ÉèÖÃµ¥²½·½Ïò 
    }
	else if (delta_x==0){
        incx=0;//´¹Ö±Ïß 
    }
	else {
        incx=-1;
        delta_x=-delta_x;
    }
	if(delta_y>0){
        incy=1;
    }
	else if (delta_y==0){
        incy=0;
    }
	else {
        incy=-1;
        delta_y=-delta_y;
    }
	if(delta_x>delta_y){
        distance=delta_x;
    }
	else {
        distance=delta_y;
    }
	for(t=0;t<distance+1;t++)
	{
		OLED_DrawPoint_Nclear2(uRow,uCol);

		xerr+=delta_x;
		yerr+=delta_y;
		if(xerr>distance)
		{
			xerr-=distance;
			uRow+=incx;
		}
		if(yerr>distance)
		{
			yerr-=distance;
			uCol+=incy;
		}
	}
}





/**********************************************
//画折线——不可用
**********************************************/	 
static uint16_t lastX=0,lastY=0;
static uint8_t firstPoint = 1;
void drawCurve(uint8_t yOffset,short int rawValue)  
{
	uint16_t x=0,y=0;
	y = yOffset - rawValue;  	//data processing code
	if(firstPoint)//Èç¹ûÊÇµÚÒ»´Î»µã£¬ÔòÎÞÐèÁ¬Ïß£¬Ö±½ÓÃèµã¼´¿É
	{
		OLED_DrawPoint_Nclear(0,y);   
		lastX=0;
		lastY=y;
		firstPoint=0; 
	}
	else
	{
		x=lastX+1;
        
		if(x<100)  //²»³¬¹ýÆÁÄ»¿í¶È
		{
			TFT_DrawLine(lastX,lastY,x,y);            
			lastX=x;
			lastY=y;
		}
		else  
		{         
			//TFT_Fill(0,0,160,128,WHITE);//ÇåÆÁ£¬°×É«±³¾°
			OLED_DrawPoint_Nclear(0,y);   
			lastX=0;
			lastY=y;
		}
  }
}
/**********************************************
//清除后画点
**********************************************/	 
void OLED_DrawPoint(u8 x,u8 y)
{	    
	static unsigned char data1;
	for(int i=0;i<8;i++)  
	{
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte ((((x+1)&0xf0)>>4)|0x10,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (((x+1)&0x0f),OLED_CMD);      //设置显示位置—列高地址   
		OLED_WR_Byte(0,OLED_DATA); 
	} //更新显示
	
	data1=(unsigned char)(0x01<<((y%8)));
	
  OLED_Set_Pos(x,(unsigned char)(y>>3));
	OLED_WR_Byte(0xb0+(y>>3),0);
	OLED_WR_Byte(((x&0xf0)>>4)|0x10,0);
	OLED_WR_Byte((x&0x0f),0); 
	
OLED_WR_Byte(data1,OLED_DATA);
}
/**********************************************
//不清除只画点
**********************************************/	 
void OLED_DrawPoint_Nclear(u8 x,u8 y)
{	    
	static unsigned char data1;

//	data1|=(unsigned char)(0x01<<((y%8)));
	if(y%8<4){
	data1=(unsigned char)(0x01<<((y%8)));
	}
	else{data1=(unsigned char)(0x8<<(y%8-4));}
	
  OLED_Set_Pos(x,(unsigned char)(y>>3));
	
OLED_WR_Byte(data1,OLED_DATA);
}


/**********************************************
//清除后一列整列的画点函数	
**********************************************/	 
void OLED_DrawPoint_Nclear2(u8 x,u8 y)
{	    
	
		for(int i=0;i<4;i++)  
	{
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte ((((x+1)&0xf0)>>4)|0x10,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (((x+1)&0x0f),OLED_CMD);      //设置显示位置—列高地址   
		OLED_WR_Byte(0,OLED_DATA); 
	} //更新显示
	
	static unsigned char data1;
	static uint8_t x_last=0;
	

	if(x==x_last){
	data1|=(unsigned char)(0x01<<((y%8)));
	}
	
	else{data1=(unsigned char)(0x01<<((y%8)));}

	
OLED_Set_Pos(x,(unsigned char)(y>>3));
OLED_WR_Byte(data1,OLED_DATA);
	x_last=x;
}

/**********************************************
//初始化SSD1306		
**********************************************/	    
void OLED_Init(void)
{ 	
	OLED_WR_Byte(0xAE,OLED_CMD);//关闭显示	
	OLED_WR_Byte(0x40,OLED_CMD);//---set low column address
	OLED_WR_Byte(0xB0,OLED_CMD);//---set high column address
	OLED_WR_Byte(0xC8,OLED_CMD);//-not offset
	
	OLED_WR_Byte(0x81,OLED_CMD);//设置对比度
	OLED_WR_Byte(0xff,OLED_CMD);

	OLED_WR_Byte(0xa1,OLED_CMD);//段重定向设置
	OLED_WR_Byte(0xa6,OLED_CMD);//
	
	OLED_WR_Byte(0xa8,OLED_CMD);//设置驱动路数
	OLED_WR_Byte(0x1f,OLED_CMD);
	
	OLED_WR_Byte(0xd3,OLED_CMD);
	OLED_WR_Byte(0x00,OLED_CMD);
	
	OLED_WR_Byte(0xd5,OLED_CMD);
	OLED_WR_Byte(0xf0,OLED_CMD);
	
	OLED_WR_Byte(0xd9,OLED_CMD);
	OLED_WR_Byte(0x22,OLED_CMD);
	
	OLED_WR_Byte(0xda,OLED_CMD);
	OLED_WR_Byte(0x02,OLED_CMD);
	
	OLED_WR_Byte(0xdb,OLED_CMD);
	OLED_WR_Byte(0x49,OLED_CMD);
	
	OLED_WR_Byte(0x8d,OLED_CMD);
	OLED_WR_Byte(0x14,OLED_CMD);
	
	OLED_WR_Byte(0xaf,OLED_CMD);
	OLED_Clear();
}

oled.h

#ifndef __OLED_H
#define __OLED_H	

#include "main.h"
#include "i2c.h"
#include "stdlib.h"

#define OLED_MODE 0
#define SIZE 8
#define XLevelL		0x00
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		32
#define	Brightness	0xFF 
#define X_WIDTH 	128
#define Y_WIDTH 	32	    						  
//-----------------OLED IIC 软件模拟驱动接口----------------  					   
#define OLED_SCLK_Clr() HAL_GPIO_WritePin(GPIOB,GPIO_PIN_1,GPIO_PIN_RESET)//SCL
#define OLED_SCLK_Set() HAL_GPIO_WritePin(GPIOB,GPIO_PIN_1,GPIO_PIN_SET)

#define OLED_SDIN_Clr() HAL_GPIO_WritePin(GPIOB,GPIO_PIN_2,GPIO_PIN_RESET)//SDA
#define OLED_SDIN_Set() HAL_GPIO_WritePin(GPIOB,GPIO_PIN_2,GPIO_PIN_SET)
 		     
#define OLED_CMD  0	//写指令
#define OLED_DATA 1	//写数据

#define S_I2C 	0	//软件模拟 I2C 接口开关

#define u8 unsigned char
#define u32 unsigned int

void fill_picture(unsigned char fill_Data);
void IIC_Start(void);
void IIC_Stop(void);
void IIC_Wait_Ack(void);
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);

void OLED_WR_Byte(unsigned dat,unsigned cmd);  
void OLED_Display_On(void);
void OLED_Display_Off(void);	   							   		    
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(u8 x,u8 y);
void OLED_DrawPoint_Nclear(u8 x,u8 y);
void TFT_DrawLine(uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2);
void drawCurve(uint8_t yOffset,short int rawValue);
void TFT_DrawLine2(uint16_t x1,uint16_t y1,uint16_t x2,uint16_t y2);
void OLED_DrawPoint_Nclear2(u8 x,u8 y);
void OLED_Clear_sw(uint8_t x,uint8_t x2,uint8_t y1,uint8_t y2);
void OLED_ShowFNum(u8 x,u8 y,float num,u8 len,u8 size,u8 mode);

void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot);
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);
void OLED_ShowChar_Complete(u8 x,u8 y,u8 chr,u8 Char_Size,uint8_t mode);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size);
void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size,uint8_t mode);	 
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_Set_Pos2(unsigned char x, unsigned char y);
void OLED_ShowCHinese(u8 x,u8 y,u8 no);
void OLED_DrawBMP(unsigned char x0, 
				unsigned char y0,
				unsigned char x1, 
				unsigned char y1,
				unsigned char BMP[]);
#endif

font.h 如果不使用f103报错只需修改#include即可

#ifndef __FONT_H
#define __FONT_H
 
#include "stm32f1xx_hal.h"

//8*6 ASCII字符集点阵
const unsigned char F6x8[][6] =		
{
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
	0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
	0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
	0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
	0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
	0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
	0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
	0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
	0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
	0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
	0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
	0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
	0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
	0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
	0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
	0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
	0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
	0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
	0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
	0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
	0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
	0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
	0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
	0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
	0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
	0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
	0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
	0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
	0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
	0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
	0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
	0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
	0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
	0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
	0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
	0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
	0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
	0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
	0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
	0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
	0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
	0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
	0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
	0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
	0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
	0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
	0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
	0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
	0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
	0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
	0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
	0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
	0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
	0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
	0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
	0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
	0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
	0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
	0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
	0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
	0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
	0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
	0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
	0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
	0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
	0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
	0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
	0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
	0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
	0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
	0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
	0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
	0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
	0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
	0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
	0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
	0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
	0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
	0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
	0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
	0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
	0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
	0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
	0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};

//16*8 ASCII字符集点阵
const unsigned char F8X16[]=
{
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//sp /0
 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//!  /1
 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//"  /2
 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//#  /3
 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$  /4
 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//%  /5
 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//&  /6
 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//'  /7
 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//(  /8
 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//)  /9
 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//*  /10
 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+  /11
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//,  /12
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//-  /13
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//.  /14
 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,///  /15
 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0  /16
 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1  /17
 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2  /18
 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3  /19
 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4  /20
 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5  /21
 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6  /22
 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7  /23
 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8  /24
 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9  /25
 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//:  /26
 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//;  /27
 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//<  /28
 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//=  /29
 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//>  /30
 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//?  /31
 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@  /32
 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A  /33
 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B  /34
 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C  /35
 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D  /36
 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E  /37
 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F  /38
 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G  /39
 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H  /40
 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I  /41
 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J  /42
 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K  /43
 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L  /44
 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M  /45
 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N  /46
 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O  /47
 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P  /48
 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q  /49
 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R  /50
 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S  /51
 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T  /52
 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U  /53
 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V  /54
 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W  /55
 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X  /56
 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y  /57
 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z  /58
 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[  /59
 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\  /60
 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//]  /61
 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^  /62
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_  /63
 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//`  /64
 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a  /65
 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b  /66
 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c  /67
 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d  /68
 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e  /69
 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f  /70
 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g  /71
 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h  /72
 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i  /73
 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j  /74
 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k  /75
 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l  /76
 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m  /77
 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n  /78
 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o  /79
 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p  /80
 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q  /81
 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r  /82
 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s  /83
 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t  /84
 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u  /85
 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v  /86
 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w  /87
 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x  /88
 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y  /89
 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z  /90
 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{  /91
 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//}  /92
 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00};//|  /93

//部分汉字
const unsigned char Hzk[][32]=
{
 // 物(0) 联(1) 网(2) 小(3) 白(4)

{0x40,0x3C,0x10,0xFF,0x10,0x10,0x20,0x10,0x8F,0x78,0x08,0xF8,0x08,0xF8,0x00,0x00},
{0x02,0x06,0x02,0xFF,0x01,0x01,0x04,0x42,0x21,0x18,0x46,0x81,0x40,0x3F,0x00,0x00},/*"物",0*/
/* (16 X 16 , 宋体 )*/


{0x02,0xFE,0x92,0x92,0xFE,0x02,0x00,0x10,0x11,0x16,0xF0,0x14,0x13,0x10,0x00,0x00},
{0x10,0x1F,0x08,0x08,0xFF,0x04,0x81,0x41,0x31,0x0D,0x03,0x0D,0x31,0x41,0x81,0x00},/*"联",1*/
/* (16 X 16 , 宋体 )*/

{0x00,0xFE,0x02,0x22,0x42,0x82,0x72,0x02,0x22,0x42,0x82,0x72,0x02,0xFE,0x00,0x00},
{0x00,0xFF,0x10,0x08,0x06,0x01,0x0E,0x10,0x08,0x06,0x01,0x4E,0x80,0x7F,0x00,0x00},/*"网",2*/
/* (16 X 16 , 宋体 )*/

{0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x20,0x40,0x80,0x00,0x00},
{0x08,0x04,0x03,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x01,0x0E,0x00},/*"小",3*/
/* (16 X 16 , 宋体 )*/

{0x00,0x00,0xF8,0x08,0x08,0x0C,0x0A,0x09,0x08,0x08,0x08,0x08,0xF8,0x00,0x00,0x00},
{0x00,0x00,0xFF,0x41,0x41,0x41,0x41,0x41,0x41,0x41,0x41,0x41,0xFF,0x00,0x00,0x00},/*"白",4*/
/* (16 X 16 , 宋体 )*/



};




#endif